Originally Posted by rexorz

I need to be able to lock my device. Fastboot wont detect my phone. Any insight here?

What happens of you rerun the controlbear?

Sent from my ADR6425LVW using XDA

Originally Posted by kingpin003

Alright, I'm at 15 min on this green arrow screen. It's obviously not doing anything. ControlBear cmd window still says waiting device. Any idea?

I ran into that as well. Take out battery and USB cable then reconnect and start controlbear again. Took me like 20 tries to get it right, mainly the wire timing

Sent from my ADR6425LVW using Tapatalk 2

Originally Posted by maqsur

Try running controlbear with your phone in fastboot mode. I never saw an adb command being used and I was able to s-off.

Sent from my ADR6425LVW using Tapatalk 2

I tried that and this is what I get:

======== ControlBear version 0.1 for JuopunutBear S-OFF ==========
Starting up......
Waiting device
Program requires root, sorry.
Quit....
Press ENTER to exit.....

I ran into the error when I was stuck on the Screen with the arrow so I reflashed my boot.img then once booted tried to run the program again and it opens and says no beer for bear today. then exit's.


======== ControlBear version 0.1 for JuopunutBear S-OFF ==========
Starting up......
No beer for bear tonight
Press ENTER to exit.....

Should I try restarting my computer I got 20g copper wire from lowes

I think I messed up one of my SD cards it says it only has 108KB and thats after formating.. any body had that problem yet?

Originally Posted by maqsur

I ran into that as well. Take out battery and USB cable then reconnect and start controlbear again. Took me like 20 tries to get it right, mainly the wire timing

Sent from my ADR6425LVW using Tapatalk 2

That's the thing, I can't get to the wire timing. You know how it shows the green arrow and sends you to fastboot to have you perform the wire trick? Mine never does.

Originally Posted by antp121

Understandable. How big is this card? I used my 16gb perfectly btw.

Sent from my ADR6425LVW using XDA

Used the 16gig that came with the device. Im trying to format the SD under

Settings - Storage - Format SD and nothing happens. Its just not my day.

Originally Posted by antp121

What happens of you rerun the controlbear?

Sent from my ADR6425LVW using XDA

I get the following:

Starting up......
No beer for bear tonight
Press Enter to exit.....

SD Card Won't Mount

---

I performed the whole process and it worked flawlessly, i was done in about 5 minutes. I used a separate SD and reformatted afterwards. However, once I replaced my old SD with my data it isn't being recognized by the phone. When I boot it into recovery, i can still navigate the card so I'm not sure where the issue lies. I'm running CleanROM 4.3

Originally Posted by luis86dr

Used the 16gig that came with the device. Im trying to format the SD under

Settings - Storage - Format SD and nothing happens. Its just not my day.

I had the same issue but I took my card out and popped it into a card reader. Windows saw the card and let me format it without any issues. Maybe try this?