Originally Posted by luis86dr

ICS. It's based off your firmware I believe.

Sent from my Htc Rezound
Follow me on twitter @lmrtech

Ok thanks. I was about to s off yesterday but right as I was about to begin. Literally 3 seconds before. My power went out and computer died lol. I'm a little scared now.

Sent from my ADR6425LVW using Tapatalk 2

Lol. Talk about bad luck.

Sent from my Htc Rezound
Follow me on twitter @lmrtech

i dont wanna spend another 5 hours lol

---

ok, well here i am trying. And the darn thing will not prompt me for the wire trick.

i dont know what im doing wrong

======== ControlBear version 0.2.1 for JuopunutBear S-OFF ==========
Starting up......
Found backups!
Using eMMC dev /dev/block/mmcblk0
Using MMC dev /dev/block/mmcblk1
Boot partition is /dev/block/mmcblk0p22
Recovery partition is /dev/block/mmcblk0p23
Is information correct? You have 5 seconds time to press CTRL+C
Finding some beer.....
Found first....
Found second....
Found third....
Found fourth....
Hmmmm... where is that last one....... Wait a sec....
JuopunutBear is ready to go....
Rebooting.......
Waiting device....
Found device... Please wait...
Making room for beer......
Loading sixpacks on sdcard......
Loaded......
Board vigor detected
5
Rebooting into fastboot!!Quit....
Press ENTER to exit.....

windows 7 x64
antivirus off
amonra installed
rom: ineffabilis running (charge mode and usb debug enabled)
downloaded newest controlbear for GB/Windows v0.2.1
extracted files into adb/fastboot
ran as admin
lets it sit, and never do i get prompted

Originally Posted by JWhetstone02

ok, well here i am trying. And the darn thing will not prompt me for the wire trick.

i dont know what im doing wrong




windows 7 x64
antivirus off
amonra installed
rom: ineffabilis running (charge mode and usb debug enabled)
downloaded newest controlbear for GB/Windows v0.2.1
extracted files into adb/fastboot
ran as admin
lets it sit, and never do i get prompted

Have you tried running the GB RUU and starting from scratch? Don't know why you wouldn't get prompted. Also, have you tried v0.1?

Sent from my Htc Rezound
Follow me on twitter @lmrtech

Originally Posted by luis86dr

Have you tried running the GB RUU and starting from scratch? Don't know why you wouldn't get prompted. Also, have you tried v0.1?

Sent from my Htc Rezound
Follow me on twitter @lmrtech

I cant find v.01
I'm trying the ICS v.0.2 now and wont install the hboot ....IF i make it that far


EDIT: and samething
using the download from the OP now

Originally Posted by JWhetstone02

I cant find v.01
I'm trying the ICS v.0.2 now and wont install the hboot ....IF i make it that far


EDIT: and samething
using the download from the OP now

Let me know how it goes.

Sent from my Htc Rezound
Follow me on twitter @lmrtech

Originally Posted by luis86dr

Let me know how it goes.

Sent from my Htc Rezound
Follow me on twitter @lmrtech

same thing again ... im going to flash cleanROM with the old firmware patch and try it once again. i dont know

Weird. Try running RUU and starting from scratch. Reboot PC as well. Question, have you updated your Android Sdk at all?

Sent from my Htc Rezound
Follow me on twitter @lmrtech

Now I'm Running CleanROM 4.3 SE

I finally get to the wire trick part, it keeps popping up over and over .. i perform that trick ... it reboots and just hangs on 'Please wait...'

we are making progress

EDIT: and yes sdk is updated

Originally Posted by JWhetstone02

Now I'm Running CleanROM 4.3 SE

I finally get to the wire trick part, it keeps popping up over and over .. i perform that trick ... it reboots and just hangs on 'Please wait...'

we are making progress

EDIT: and yes sdk is updated

Same problem running innefabillis it stops at fastboot using .2.1