[q] [help] moto milestone bootloop at android logo

---

I have a Motorola milestone (second hand) and tried to load a update for it then i noticed the following problems:
- boot looping at the android logo
-when i tried going into bootloader i get a blank black screen
-when i go into recovery and try to update using "update.zip" i get a EOCD error and another time i get a authorization error

WHAT TO DO????

Come on dude,

Just search EOCD error, I think you will find at least 15 topics.

You lost root, Nedd to flash vulnerable recovery sbf. You will find latest instructions on nadalbak site.

You can find site inside his cm7 topic. Milestone android development.

Sent from my Milestone using xda premium

i'm fairly new to the milestone side, the version that is on the phone is 2.2
Everybody's instruction is to put the phone in bootloader mode and connect to the pc but i only get a black screen and then the phone restarts hence rsd lite not picking it up

Put it in recovery and try to flash another sbf, it should work.

Trough rsd lite.

try that just now and still no response on the pc, and i know the usb port is working because i charged the phone

Are you sure your drivers for phone are correctly installed?

Explain correctly installed?
yeah so what about when i try going into boot loader and get a blank screen?

In the early development of moto driver's phone wasn't recognised by rsd lite.

I didn't hear of that problem anymore though. The solution was to reinstall / install drivers again or try on another pc.

Cable could also be a problem.

Are you trying to enter bootloader with the cable connected to phone? If yes try without and after connect it.

The cable isnt the problem, im sure of that and i tried on two other laptops but they are 64 bit windows 7 but anyways why when i press "power+vol up + camera" i only get a black screen and not black screen with other milestones?
I'm thinking thats the problem or reason why rsd lite not picking up the phone cuz its not in bootloader mode

Ahhh

It took some time since last used bootloader.


But I think is power + x for bootloader.

==== update ====

my bad that's for recovery

oky just tested:

it's power + up key from keyboard

now when i first pressed the power i got a black screen, so i pressed the power again while holding the up key .. and voila:


bootloader 90.78

battery ok
....


good luck ..