which one's do you need?

recovery.img, boot.img or the full rom.zip?

Dev Host - Evita RUU's

PS: Can you please share you packing method with sk806

I don't need any. I can't actually use this yet. ;)

But Koush will probably want the stock boot.img and recovery.img files.

P

i feel so left out with my att version =[

Originally Posted by paulobrien

I built an interim unofficial ClockworkMod recovery for the S4 based One X to test on my rooted AT&T unit. DD'ing it to the recovery partition on that results in a tamper warning (as the bootloader is locked), but it should work on Rogers' units etc.

Feel free to try!

• DOWNLOAD

P

Yay! I can stop now.... Thanks, Paul.

---------- Post added at 08:27 AM ---------- Previous post was at 08:11 AM ----------

I just unpacked this, and the recovery.fstab and boardconfig are the same as what I was doing. I could build one for endeavor that worked, but not the Evita...I wonder what I was doing wrong? Did you build from the CM9 repo? Any tips would be appreciated! Thanks again, Paul.

Originally Posted by sk806

Yay! I can stop now.... Thanks, Paul.

---------- Post added at 08:27 AM ---------- Previous post was at 08:11 AM ----------

I just unpacked this, and the recovery.fstab and boardconfig are the same as what I was doing. I could build one for endeavor that worked, but not the Evita...I wonder what I was doing wrong? Did you build from the CM9 repo? Any tips would be appreciated! Thanks again, Paul.

Nah, in the interest of speed I just repacked the Endeavor CWM with a fixed recovery.fstab, appropriate init.rc and default.prop files (not really important) and the Evita kernel.

P

Originally Posted by paulobrien

Nah, in the interest of speed I just repacked the Endeavor CWM with a fixed recovery.fstab, appropriate init.rc and default.prop files (not really important) and the Evita kernel.

P

Huh. I did the same. Weird...must have messed something up in build. Thanks, Paul.

Originally Posted by sk806

Huh. I did the same. Weird...must have messed something up in build. Thanks, Paul.

quite a size difference between yours and paul's though, almost 1mb

Originally Posted by JSLEnterprises

quite a size difference between yours and paul's though, almost 1mb

OK, I see that, too. I am now unpacking the endeavor version I made, and will replace appropriate parts and see...

---------- Post added at 09:18 AM ---------- Previous post was at 09:18 AM ----------

Originally Posted by sk806

Yay! I can stop now.... Thanks, Paul.

---------- Post added at 08:27 AM ---------- Previous post was at 08:11 AM ----------

I just unpacked this, and the recovery.fstab and boardconfig are the same as what I was doing. I could build one for endeavor that worked, but not the Evita...I wonder what I was doing wrong? Did you build from the CM9 repo? Any tips would be appreciated! Thanks again, Paul.

OK, guess I can't. I'll keep plugging away today,.

Steve

nice...now...I want good roms...

Originally Posted by sk806

OK, I see that, too. I am now unpacking the endeavor version I made, and will replace appropriate parts and see...

OK, guess I can't. I'll keep plugging away today,.

Steve

Let me know, and I'll flash from my lappy.