Originally Posted by halavin

New rom in mobileuncle.com! Rom基于Taiwan101_Haipai-i9220_V.03与G26-2012-6-3-s2(4.0.4)制作
部分APK更新到4.0.4, 内核为3.0.13 Mon May 14 21:38:28 CST 2012

//products.mobileuncle.com/thread-130832-1-1.html

Seem I cant get pass the download.Has anyone tried those new updates?

Originally Posted by captainginko

Has anyone yet came up with an English recovery or CWM that we can flash to the Star Note i9220 or is everyone just using the HTML translation page?

It is the Merimobiles one. I don't want to Flash anything until I have a working recovery. Thanks!

Star I9220 DPAD Official Thread: http://forum.xda-developers.com/show....php?t=1695218

Star N8000 Official Thread: http://forum.xda-developers.com/show....php?t=1695210

Please try and state Your question in one of those topics. This thread is for Haipai I9220 - lets all help keep these topics separated. It'll benefit us all in the long run

Do someone has in his phone a Sim Toolkit that it work?
in system/ app there are stk1 and stk2... but i dont see in drawer....
do someone have a apk that i can use in our phone?
Thanks a lot
Angelo

ps..
i go to try the new firmware....

---------- Post added at 10:03 PM ---------- Previous post was at 09:33 PM ----------

i have installed the new rom....

but
... it don't have any google apps.......
Network location is ok
and i always have a 2gb of internl memory, SD1 and SD2 (512mb)
i make a restore of data by angelobiz v.1.0 and all is ok!!!

i don't see any good news.... but it is very nice, with only a launcher: Go Ex...
and there ia a usefull app .-) but it is chinese .-(
4 option:
1) off the phone
2) reboot after wipe cache
3) reboot in recovery
4) reboot
Is there in english?

you can try it :)

Angelo

Haipai i9220 Noble - New Rom

---

Originally Posted by angelobiz

Do someone has in his phone a Sim Toolkit that it work?
in system/ app there are stk1 and stk2... but i dont see in drawer....
do someone have a apk that i can use in our phone?
Thanks a lot
Angelo

ps..
i go to try the new firmware....

---------- Post added at 10:03 PM ---------- Previous post was at 09:33 PM ----------

i have installed the new rom....

but
... it don't have any google apps.......
Network location is ok
and i always have a 2gb of internl memory, SD1 and SD2 (512mb)
i make a restore of data by angelobiz v.1.0 and all is ok!!!

i don't see any good news.... but it is very nice, with only a launcher: Go Ex...
and there ia a usefull app .-) but it is chinese .-(
4 option:
1) off the phone
2) reboot after wipe cache
3) reboot in recovery
4) reboot
Is there in english?

you can try it :)

Angelo

Please post link to Haipad i9220 Noble firmware upgrade from today - not for Star model. Thanks!

Screen size is almost identical to the real note. Very very close.

Battery life is not good unless you turn off data connection when not use by using apps like juice defender or something.


You need data connection to use gps. No need to turn on the gps, google map can detect my location pretty quickly.

Sent from my haipai using xda premium

I'm wanting to flash the custom recovery, so I can run the AGPS fix file.
The PC detects the phone without the battery and the device manager shows the preloader USB then after 2 -3 seconds I get the device disconnect tone and the phone is no longer detected.
I've cleared the old drivers on my Win7 pc using the technique mentioned on page one and re-loaded them when requested, using the ones in Angleobiz folder, I've even tried using an old winXP laptop which had seen an android device before, still it the same problem.
Running the root program was fine though. Please help?

Guys! Please help me...

---

hi guys..i just bought an mtk6575 5.0 inch I9220 (i dont know this phone is Haipai I9220 or Star I9220..it just printed only I9220) about a week ago..it running real android 4.0.3 os.front camera is on the left and the power button located top of the front camera.volume rocker button located on the right.i already root this phone and dont have any problem with this device..but im facing a network problem..sometimes it suddenly lost network..it says "restricted area changed..although the area have no problem with the network (except 3g)..i switched to gsm and change imei but still facing the problem..guys,please help me..i love this phone...

Star Note or Haipai Note?

---

Hi, sorry, I'm trying to figure out which one of those phones (if any) I've got.
the site where I bought it: androidforcheap
It's a white phone, front camera on the right, using ICS user interface, running kernel 2.6, volume controls on left.
Does anyone have any ideas? The seller just calls it Galaxy Note Plus GT-N7000 I9220?
Thanks for your help.

Originally Posted by contracara

Hi, sorry, I'm trying to figure out which one of those phones (if any) I've got.
...... The seller just calls it Galaxy Note Plus GT-N7000 I9220?
Thanks for your help.

You have it all in the name.
N7000

Help in first step

---

I installed the firmware May 14. But I can not make the 1st step.

1.Please root file download from the link above.
2.Go to setting-developer-click USB debugging options
3.Connect the phone with computer, turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat
5.Your phone will restart first time, after the phone start finish (until you see the unlock), click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time, still the same the first team we start did.Then third time, we did the same in last two times.Click enter, then phone was rooted.
7.You will see two more app was installed in your phone, that 'root mean phone successfully.

Clicking TPSparkyRoot.bat. the black screen appears with the following information.

.
Now we will attempt to root your device!
.
'adb' is not recognized as an internal command
or external, operable program or batch file.
'adb' is not recognized as an internal command
or external, operable program or batch file.
'adb' is not recognized as an internal command
or external, operable program or batch file.
Rebooting (third) - Once your rebooting device has finished, then
Press any key to continue. . .

Give me a more detailed explanation of this process. Or tell me what I'm doing wrong.