New Sprint Docs Released For the EVO LTE

---

New Sprint Docs have been released. From Good and Evo Website.
i cant post the link because I'm a NOOB
GoodandEvo.net

http://www.goodandevo.net/2012/05/in...-download.html

Original source: http://insidesprintnow.wordpress.com/

Am I the only one that noticed this

• Internal Memory: 16 GB ROM, 1 GB RAM, microSD™ slot for expandable storage up to 32 GB Support SD2.0/ SDHC (includes 8GB microSD card installed)

Are they including a card again? I thought I had read that they were forgoing this, this time around.


Will

Originally Posted by shellguy

Am I the only one that noticed this

• Internal Memory: 16 GB ROM, 1 GB RAM, microSD™ slot for expandable storage up to 32 GB Support SD2.0/ SDHC (includes 8GB microSD card installed)

Are they including a card again? I thought I had read that they were forgoing this, this time around.


Will

I noticed that also - there are some other issues with these docs too. It makes me think that these docs aren't final. From what I understand, it's only coming with a charger and cable.

I don't know about you guys but Symptom #2 and the Fix at least sounds like you are putting the phone into different modes. maybe a way to s-off

Symptom #2:
If the device cannot power on, and seems that it cannot be charged, it could be that the device is not in default operation mode. This can be caused when the “volume up key” was pressed while pressing the “power” key when device was last powered down. To power on and off the device normally, please be careful to not hold down any other hardware key while pressing the power key during power up operations.
How to fix:
1. Press & hold the power button for up to ~ 20 seconds. The capacitive keys (three keys at bottom of screen) should begin flashing. This indicates that a reset is imminent. Continue to hold power until they stop flashing.
2. Release the power key
3. Press the power key again for 1 second. Wait a few seconds and the device should then power on; Check power level and perform Symptom #1 procedure if indicator is low or device still does not power on.