Originally Posted by Many40

Hello,
Thanks for sharing your experience with the others, that is great. I'm gonna check your config soon. But when I started using NEAK kernel and tried UV/UC I experienced many wakelocks (when unlocking lock screen the phone hanged).
I came back to default configuration (without UC/UV with Lulzactive/VR with default settings) but it didn't help. Only then that I disabled "Ext4 Boost", the hangs disappeared. Have you ever experienced this? Is it possible that Ext4 Boost caused this problem or maybe it helped by accident? I'm on XXLPS sammy rom.


__________________
Phone : i9100 Samsung Galaxy S II
Rom : XXLPS/NEAK 2.0.4
Apps: NEAK Configurator Pro, Tegrak Lulzactive 1.1, Voltage Control Extreme.

Interesting. You might be better off asking Simone about this one. Seems very strange because I haven't experienced problems since day one. Deep sleep is existent. Wakelocks are non-existent. I'm sure someone on the N.E.A.K. ICS thread will be able to help you.

Yeah, another thread about kernels! Me iz liking. You should post it at teamhydra

Sent from my i9100. No HyDrOG3NICS? No SWAGG..

Originally Posted by Paradoxxx

Yeah, another thread about kernels! Me iz liking. You should post it at teamhydra

Sent from my i9100. No HyDrOG3NICS? No SWAGG..

Hahaha, I know. kernel overkill, right?
Thanks buddy. I appreciate your support.

I still intend to give Netchips kernel a whirl once you release the new update. It's been a while since I last used stock.

I'll be sure to add the thread to teamhydra shortly. Congrats on getting it up and running btw. Great work man.

voltage

---

hi

Voltages:
800(200), 925(500), 950(800), 1050(1000), 1175(1200)

what should i set 100 MHz to? 950?

Originally Posted by frankey81

hi

Voltages:
800(200), 925(500), 950(800), 1050(1000), 1175(1200)

what should i set 100 MHz to? 950?

Hey. My recommendation is not to use 100mhz at all, as it wouldn't be battery friendly. Especially because 200mhz is at 800mV, which is the lowest you can go.

You should set your CPU frequency at 200mhz-1200mhz for optimal performance and battery.

Be sure to follow my settings exactly, as they're stable. Even the slightest change might cause instability, unless you're sure you know what you're doing.

Nice done. Im using Siyah but my configs are similar to u so i can give u some question.

I often get around 5 hours of screen on time but i domt play game so I think it's equal.

Your CPu undervolt is amazing, i never thought of setting 200mhz to 800, it's insane, congrats dude
By the way, i only set lulz app cpu load to 75%, i think 90% is too high, but many people do so, so it.must be a reason, can u tell me why ?
By the wau,ur pump up and pump down step is 2 - 1, exactly like.mine , im just too confused about its rate, I set it to 35000, 25000, which of it do u think is best ?
Sent from my GT-I9100 using XDA

Originally Posted by randomseasons

Nice done. Im using Siyah but my configs are similar to u so i can give u some question.

I often get around 5 hours of screen on time but i domt play game so I think it's equal.

Your CPu undervolt is amazing, i never thought of setting 200mhz to 800, it's insane, congrats dude
By the way, i only set lulz app cpu load to 75%, i think 90% is too high, but many people do so, so it.must be a reason, can u tell me why ?
By the wau,ur pump up and pump down step is 2 - 1, exactly like.mine , im just too confused about its rate, I set it to 35000, 25000, which of it do u think is best ?
Sent from my GT-I9100 using XDA

Thanks! Did you try these settings out by the way? (I would love to know if they work for Siyah kernel users.)

I was amazed too. I took a shot in the dark and was shocked and overjoyed that I could get 200mhz down to bare minimum. Very useful indeed!!

90% cpu load is the most I can go with my settings, anything over that freezes my phone. I used to set it to 60%, 70%, 80%... but I really just wanted to maximize battery life. From what I understand, 90% cpu load will restrict high CPU frequencies until they're REALLY needed, so 1000MHZ & 1200MHZ will only kick in at the last minute, (saving tons of juice). I haven't had any issues and would recommend that you definitely give 90% a try. Experimentation is the key.

I know I set my up_sample & down_sample to 20000us, 40000us - but it really is just about what works for you. If I drastically change either one, I'll get varying performances. They generally stay static, unless I have a major breakthrough or blindly test out a theory.

The only things that really change in my overall settings are: Voltages, Dynamic Hotplug Thresholds, GPU mV and perhaps the cpu load (in some situations).

Hope this helps you.

Hi, thanks for the settings info, getting great battery life similar to stock . Only thing I noticed is that wi-fi drops out quite frequently. Would that be anything to do with UV?

Originally Posted by mario999

Hi, thanks for the settings info, getting great battery life similar to stock . Only thing I noticed is that wi-fi drops out quite frequently. Would that be anything to do with UV?

Very doubtful dude. Haven't had problems my end. Was having some Wi-Fi problems on the previous version of N.E.A.K. (2.0.3), but they were all cleared up by 2.0.4.

Which ROM are you using? Could be a ROM issue? or even a possible compatibility issue between your current ROM and your internet router/modem?

Otherwise, I have no freakin' idea man. Very strange.

Great settings mate. Using this with my new 2000 mAh battery and HyDrOG3N-ICS 05.05. So far seems good and stable.