[ODIN][TAR] SPH-D710.FE10_CL543980 (FE10 Modem/Kernel/ROM - Full Restore - Rooted)
Quote:
Thanks Denys Vlasenko/chris41g for busybox, ChainsDD for su, Steady Hawkin/Calkulin for FD02+CWM-Rogue(repack),
qbking77 for video, id10terror for Odin 1-click suggestions, mavd5831, RainMotorSports, sponge66 for mirror(s)
|
You may have heard... the zerglings fought a noble battle against the samdroids and held their own for many battles, but were finally defeated on the EL13 battleground. Starting with EL13 the zergrush exploit is plugged. Do not fear, as the zerglings have enlisted their old ally Odin to fight the next battle for them.
This One-Click ODIN contains the
STOCK FE10 Modem/Kernel/ROM for the E4GT.
The ONLY change was the addition of ROOT to the ROM. NOTHING else was changed. If you made no other changes, you WOULD be able to install an OTA patch update (based off of FE10) on top of this w/o issues.
This will
NOT trigger the Yellow Triangle
NOR will it increment the ODIN flash count.
This does
NOT have the issue with the USB jig being disabled.
This is equivalent to using the
Auto Root Package on a stock ROM. In fact, if you used that package to UNROOT (Option B) this ROM then it would become 100% stock. After flashing this all functions of that package will be functional.
There are two versions provided, a
FULL Restore that resets your whole phone, similar to a factory restore, and a
No Data Restore, which is the same, except it preserves your User Data. The NoData version is only suggested if you are
upgrading or remaining at the same version.
Instructions -
Video by
qbking77 [
ODIN One-Click /
Install CWM]
0) Backup anything important and
Disable any PINs
This process will restore you to factory software. All your Android data will be reset.
To be safe, it is best to archive your backup off your phone, ie on your PC or dropbox.
Note #1: Please
DISABLE any PIN code you may have created to protect your phone. As a security measure, after the flash, Android will ask you for your PIN, if you have one enabled. It is simpler to have no PIN active. If you forgot your PIN then, after the factory restore, just enter the wrong PIN a few times and it will warn you. Enter the wrong PIN again and it will reset the filesystem.
1) Install Samsung USB/Android drivers (if necessary) [
USB/Android]
2) Download the FE10 full restore One-Click self-extractor
SPH-D710.FE10_CL543980_ROOTED-oc-sfx.exe [
Mirror1 /
Mirror2 /
Mirror3] (
RESET user data)
[
MD5: 7e1d799321b08a9de3b339e4ba354afc /
Size: 308,214,201]
SPH-D710.FE10_CL543980_ROOTED_NODATA-oc-sfx.exe [
Mirror1 /
Mirror2 /
Mirror3] (
PRESERVE user data - do NOT use if downgrading versions)
[
MD5: 636794541f3f851024b0bcb0cf5e2386 /
Size: 307,226,504]
Mac/Linux -
Install 7-zip, then use it to unpack the individual ODIN components in Reference Section B (below). If Heimdall fails flashing all 3 files together, try doing them individually. Skip the remaining instructions that are windows specific (steps 3, 4, 6).
Android -
Install ZArchiver, then use it to unpack the ODIN OneClick 7zip self-extractor file in this section (long press *-oc-sfx.exe, Open as archive, Odin-OC, select *-OneClick.exe, Extract). Use
Mobile ODIN to Open File the resulting *-OneClick.exe file.
Mobile ODIN issue - modem might not flash consistently. Skip the remaining instructions that are windows ODIN specific (steps 3, 4, 5, 6).
3) Extract the package
double-click on the self-extractor file, specify the directory to extract to (
instructions assume C:\)
4) Start ODIN One-Click
Navigate to
C:\Odin-OC
Full: Double-click on
SPH-D710.FE10_CL543980_ROOTED-OneClick.exe
NoData: Double-click on
SPH-D710.FE10_CL543980_ROOTED_NODATA-OneClick.exe
5) Place phone in ODIN download mode
Code:
Method #1
Power down phone
Wait for capacitative button lights to turn off
Simultaneously Press and Hold [Power] [VolDn] until confirmation screen appears
Press [VolUp] to enter Download mode
Code:
Method #2
adb reboot download
Code:
Connect USB cable to PC if not already connected
ODIN should show yellow COM port in 2nd column
Note #1: If you do not see a yellow COM port, you may need to run the ODIN One-Click as Administrator and/or unplug/plugin the USB cable after starting ODIN One-Click.
6) Start ODIN flash process
Press
[Start]
7) Complete - PASS!
When complete you should see a screen similar to what is shown at top of post
Phone will automatically reboot
Status should change to green
PASS!
Boot process will be slightly longer than usual during which time you'll see the 4G logo screen.
If you want CWM use Option D in the
Auto Root Package to install
FD02+CWM-Rogue (you are already rooted so Option A is not necessary)
If you need to clear NVRAM/Sprint data login info, perform a ##72786# reset from the Dialer and enter MSL.
Type
getprop ril.MSL in
adb shell or terminal to retrieve your MSL.
For
NoData install:
- If you are getting random force closes, wipe cache/dalvik-cache
- If you have troubles with Android Market, clear data from
menu->applications->all->market->clear data
- If you have troubles booting into Android, perform factory reset in ICS using the
ODIN OneClick Factory Reset tool.
Do NOT perform factory resets using stock recovery or privacy->reset, at least until you read about the
EMMC superbrick/lockup bug and understand what the trigger points are and what you are exposing yourself to.
Introducing XDA:DevCon – A Conference For Developers By Developers
>
[ODIN][TAR] SPH-D710.FE10_CL543980 (FE10 Modem/Kernel/ROM - Full Restore - Rooted)
Print
Email
View Profile
View Forum Posts
Linear Mode
