DroidX CPU Governors and SIO Kernel Scheduler V2.2

---

UPDATE 2015\08\01 ICS & JB Patch
Since ICS and JB contain boosted (modified boostedass) and sio by default now, I made a cwm zip to patch the default values of boosted and sio's correct values (they're for cfs in CM9\10). This is not for CM7 and won't work with it.*
Link to Post

UPDATE 2015\05\16 DroidXGovernorsV2.2
Removed blank bootmenu folder
Cleaned up init script, removed unsupported lines, added supported lines
Included SD Card Cache Tweak with 2048 value, to match io tweaks
**The lines weren't supported on Bravo Froyo Kernel, added new lines from /sys/block/mmcblk0/queue/iosched**
**If the removed lines are supported on GB Kernel, let me know and I'll make a zip for each kernel.**
**Just remove the last 2 lines of the init script if you don't want\need the SD Cache Tweak**

UPDATE 2015\05\15 DroidXGovernorsV2.1
Screenshots showing battery savings and usage
Fixed dumb script error

UPDATE 2015\05\15 DroidXGovernorsV2
Removed Undervolted Cpu Clocks -- Gave problems for Defy+ useres on GB kernel
SIO IO Scheduler now properly loads -- No market app needed now.


This CWM compatible zip will install the DroidX smartassv2 and BOOSTEDassV2 cpu governors as well as the SIO Kernel Scheduler. While I've only tested this on CM9, it should work on ANY rom with init.d support and Defy 2nd-init Bootmenu....meaning all CM7\9 and Miui roms. I'm unsure if MS2Ginger and Stock Froyo have init.d support. It also undervolts the rom to 300@20, 600@40, and 1000@54. Those values work fine with CM9 on my phone, meaning no fc's due from being too undervolted.

To install, simply flash the zip in cwn and you're done. Wiping Cache and Dalvik Cache isn't necessary.

To use the Governors, select the governor in the CM Performance Menu and select apply on boot, or use a CPU Governor program from the market. I recommend No Frills CPU Control --- its free, no ads, no bs permissions, and you can select the io scheduler.

To use the SIO Kernel Scheduler, install No Frills Cpu Control from the market and select SIO (or noop) from the bottom menu.

I haven't used SIO very much (5-10 mins now), but it seems to be working well. The noop scheduler works great, and is what I normally use; but I've always read good things about SIO (and wanted to use it), so I thought I'd include it as well.

I'd give thanks to the authors of the Governors and Schedulers, but I have no idea who wrote them....I only found them in Beanstown106's DroidX Miui V4 rom and they happen to work wonderfully on the Bravo.

UPDATE Post
SimpleOverclock
An alternative to No Frills CPU Control with profile support, apply on boot, io changer, governor changer, & more features to come. Probably going to be my new overclock app, need to test for more than a few minutes.

My Little Experiment
I uploaded the governors here for the Bravo, and to Mediafire for the Defy. In the first 2 hours of posting -- 6 Bravo downloads to 45 Defy Downloads (and a page full of posts). Not very surprising, but interesting none-the-less.

*CM7 - The modules for boosted and sio aren't included with this patch making it useless for CM7. I've already released a patched CM7 with this in my Kang thread.

Originally Posted by skeevy420

UPDATE 2015\05\15 DroidXGovernorsV2
Removed Undervolted Cpu Clocks -- Gave problems for Defy+ useres on GB kernel
SIO IO Scheduler now properly loads -- No market app needed now.

Download DroidXGovernorsV2.zip

This CWM compatible zip will install the DroidX smartassv2 and BOOSTEDassV2 cpu governors as well as the SIO Kernel Scheduler. While I've only tested this on CM9, it should work on ANY rom with init.d support and Defy 2nd-init Bootmenu....meaning all CM7\9 and Miui roms. I'm unsure if MS2Ginger and Stock Froyo have init.d support. It also undervolts the rom to 300@20, 600@40, and 1000@54. Those values work fine with CM9 on my phone, meaning no fc's due from being too undervolted.

To install, simply flash the zip in cwn and you're done. Wiping Cache and Dalvik Cache isn't necessary.

To use the Governors, select the governor in the CM Performance Menu and select apply on boot, or use a CPU Governor program from the market. I recommend No Frills CPU Control --- its free, no ads, no bs permissions, and you can select the io scheduler.

To use the SIO Kernel Scheduler, install No Frills Cpu Control from the market and select SIO (or noop) from the bottom menu.

I haven't used SIO very much (5-10 mins now), but it seems to be working well. The noop scheduler works great, and is what I normally use; but I've always read good things about SIO (and wanted to use it), so I thought I'd include it as well.

I'd give thanks to the authors of the Governors and Schedulers, but I have no idea who wrote them....I only found them in Beanstown106's DroidX Miui V4 rom and they happen to work wonderfully on the Bravo.

UPDATE Post
SimpleOverclock
An alternative to No Frills CPU Control with profile support, apply on boot, io changer, governor changer, & more features to come. Probably going to be my new overclock app, need to test for more than a few minutes.

My Little Experiment
I uploaded the governors here for the Bravo, and to Mediafire for the Defy. In the first 2 hours of posting -- 6 Bravo downloads to 45 Defy Downloads (and a page full of posts). Not very surprising, but interesting none-the-less.

wow you are amazing skeevy420 to try.....

Originally Posted by mataflakitas

wow you are amazing skeevy420 to try.....

Don't use the V2, I uploaded the wrong file. Its fixed now with 2.1 attached to the first post.

Originally Posted by skeevy420

Don't use the V2, I uploaded the wrong file. Its fixed now with 2.1 attached to the first post.

Ok your best friend I hope I will not have problems updating....

Originally Posted by mataflakitas

Ok your best friend I hope I will not have problems updating....

You won't. The script crapped out on the first command.....I left in a single space and forgot to put () around the code. It was fixed on my phone when I tested it, but I uploaded my pc's first copy (which was bad) by mistake.

Originally Posted by skeevy420

You won't. The script crapped out on the first command.....I left in a single space and forgot to put () around the code. It was fixed on my phone when I tested it, but I uploaded my pc's first copy (which was bad) by mistake.

Ok best friend did not move to my device I am a newbie and do not want to damage it ....



skeevy420 friend buy my wife a cell phone is locked you can help me unlock it, now I live in mexico the phone is a Samsung 4G Exhibit II, or I can assign any web page that does not cost

Originally Posted by mataflakitas

Ok best friend did not move to my device I am a newbie and do not want to damage it ....

It won't damage it. In fact, you'll get really good battery with it. I really recommend using this.

skeevy420 friend buy my wife a cell phone is locked you can help me unlock it, now I live in mexico the phone is a Samsung 4G Exhibit II, or I can assign any web page that does not cost

If it requires calling ATT then no, I don't have the account's password.

Originally Posted by skeevy420

If it requires calling ATT then no, I don't have the account's password.

skeevy420 the company's phone is T-MOBILE




You know someone from that company

Originally Posted by mataflakitas

skeevy420 the company's phone is T-MOBILE

You know someone from that company

No, only Verizon. But she's my friend's wife and a total bitch who wouldn't help.

Originally Posted by skeevy420

No, only Verizon. But she's my friend's wife and a total bitch who wouldn't help.

jajaja do not worry I hope to find someone who can help me...