Please read the guides below before asking questions
Here we go guys with the Odin flash guide for the Galaxy SIII and official firmware thread. Oldest firmware are listed first and newest will will be the last/bottom of the list. These can be found in the second and third posts of the thread.
This thread will also double as the TECH SUPPORT thread. Please post issues in here and WE will try to solve your problem.
PDA refers to the build version of the software/firmware
Phone refers to the baseband/modem version
CSC is the consumer software customisation and is specific to geographical region and carriers. It contains the software packages specific to that region, carrier branding and also APN settings for data connection, MMS etc for your service provider.
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
.PIT refers to the partition information table you only need it if you screw up your partition table or if the firmware specifically requires it because of a change in the partition table layout. It's very likely you may never have to use this.
If the package only contains one .tar archive then it will have everything, pda+phone+csc, in the one file.
If it has multiple .tar archive then:
The .tar with modem in the name is the phone/baseband bit of the package
.tar with csc/multi-csc in the name is the csc bit of the package
.tar with code/PDA in the name is the PDA part of the firmware package
If this is the case you will need to put these .tar archives in the specific areas of Odin to flash the update. Refer to the images below.
You do not need to root or unroot the device to update the firmware.
Please ensure that KIES is closed and not running in the system tray! Kies doesn't like Odin, it's like the big brother who's always jealous that his little brother is getting to flash all the phones so he starts to flash block.
Regarding change logs. Samsung thinks firmware should be like a box of chocolates, you never know what you’re gonna get and that all a big part of the surprise user experience program so they don't publish any change logs.
Get Odin v3.04 from here: Download
Just extract the Odin folder.
You will also need to install the Samsung USB drivers for the device if you haven't installed KIES. Get them from here: Download
Just install like any Windows program
Flashing Firmware with Odin
1. Just download the firmware version you want from the second or third posts and extract the .tar or .tar.md5 file in the archive and save it somewhere
2. Reboot your phone to download mode.
To get download mode shut down the device. After it shuts off completely simultaneously press the Down volume key+ Home button + press the power button .
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!
3. Start Odin
4. If your ROM is a single .tar.md5 package click on the PDA button and browse to the .tar or .tar.md5 file that you extracted in step 1 and select it. This should like like the image below
If the package has more than one .tar archive then they will be labelled with PDA/Code, Phone/Modem and CSC. Just put them in the corresponding section of Odin like below
5. DO NOT PUT .PIT FILE AND DO NOT, I REPEAT, DO NOT TICK REPARTITION.
Regardless of firmware version it's still the same methodology
6. Connect the USB cable and wait for any required drivers to install and the ID:COM section to turn blue like below
7. Click start to flash. If Odin hangs at setting up connection just unplug the USB cable and re-attach it, Odin should now resume
8. Do not disconnect the cable or turn off the device once the flash has started, it will reboot when it finishes.
If the firmware is from this thread it will not wipe your phone if you flash as recommended UNLESS I state that the firmware is a "WIPE" version.
Flashing Firmware with Mobile Odin
To be added
1. Make sure you have the Android SDK installed on your PC as you'll need adb to accomplish this. Get it from here: Android SDK
2. Download ChainFire's root install zip package and extract it's contents. Get it from here: Download
3. Download the insecure kernel that you need from here and extract it from the archive
4. Start Odin 3
5. Click on PDA in Odin 3 and browse to the insecure kernel that you've extracted above in step 3. Your Odin should look exactly like this:
6. Turn your device off and then place it into download mode (See guide above for instructions)
7. Connect microUSB cable to your device and wait for the ID:COM section of Odin to turn blue. It should look like this:
8. Go ahead and click on Start and wait for Odin to complete flashing the kernel. The device will reboot automatically.
9. Now go into settings -->Developer Options of your device and ensure that USB Debugging is ticked. If it isn't then unplug your MicroUSB cable and tick it then plug the MicroUSB cable back in.
10. Open your file browser and browse to the directory to which you've installed the Android SDK. Browse to the Platform tool directory
11. Press SHIFT key on your keyboard and right click anywhere in that directory and click on "Open command window here":
12. Now type: adb start-server and press enter:
13. Now that you've started the adb server close the command window and browse to the directory to which you've extracted ChainFire's root install zip
14. Just double click install.bat Or holding Shift Key + right click on mouse then click on "Open command window here" and type "install.bat", without the quotation marks, and press enter
15. Your phone should reboot itself once the script has completed.
16. Your phone is now rooted! Booom!!!
17. Install BusyBox from the Play Store
18. This is optional but if you want to you can flash back the stock kernel now.
19. Excuse me whilst I reboot my PC back to OpenSUSE. Windows!!
Video Guides go here when ready
Samsung Letter Code
CE---> Belgium, Luxembourg, Netherlands
DX---> Indonesia, Malaysia, Philippines, Singapore, Vietnam
DZ---> Malaysia, Singapore
JA---> South Africa
JC---> Algeria, Morocco, Nigeria, South Africa, Tunisia
XDA Elite Recognized Developer AdamOutler is known … more
XDA Developers was founded by developers, for developers. It is now a valuable resource for people who want to make the most of their mobile devices, from customizing the look and feel to adding new functionality. Are you a developer?