FORUMS

[FTF] Sony Xperia Z Lollipop Release

Sony rolled out a Lollipop update for Xperia Z just yesterday. If you still haven’t gotten … more

Original Moto G Receives Lollipop, OTA Captured

The original Moto G was released almost two years ago. Motorola still continues to … more

Device Review: No.1 X1 Rugged Smartphone

We are almost at the end of Q2 for 2015, and we have seen most of the flagship phones for the … more

When a Friend or Family Member Asks for a Phone Recommendation, What Do You Tell Them?

The majority of us here at XDA would consider … more
Post Reply Subscribe to Thread Email Thread

DIY Universal USB Charging Adapter (Step-By-Step w/Pics)

26th August 2012, 11:50 PM |#11  
Senior Member
Thanks Meter: 31
 
More
Going to add an update method i discovered.
Just need to connect red power and earth no data lines or resisters are necesary.
Put a on/off switch on the earth to cut it.
First apply power with earth connected..
When get the red x...
Simply dis connect the earth and re apply via your switch.
When its re applyd this forces AC Charge mode from having red x before...
Have tested this using both 2amps and 1/2amp @ 5 volts.
Method works on both...
Try it and let me know,it works on my 7.7 tab...
The Following User Says Thank You to MRBR7 For This Useful Post: [ View ]
 
 
5th September 2012, 12:14 AM |#12  
Junior Member
Thanks Meter: 1
 
More
Excellent write up!

Works great on my GT 8.9 LTE with a NewTrent IMP60D battery.

Many many thanks!
The Following User Says Thank You to m_1000rr6 For This Useful Post: [ View ]
5th October 2012, 04:02 PM |#13  
NRGZ28's Avatar
Retired Senior Mod & Senior RD - (old) King of WinMo
Flag XDA-Developers
Thanks Meter: 10,051
 
More
Just for future visitors to this thread, this method also works with a Verizon Galaxy Tab 7.. the original one
The Following User Says Thank You to NRGZ28 For This Useful Post: [ View ]
7th December 2012, 06:02 PM |#14  
Senior Member
Flag Mumbai
Thanks Meter: 5
 
More
Hi
I have a couple of iPAD3 chargers. I wish to use them for my Note 10.1 (3G+WiFi). Pl advise if a kernel soln or a patch is available for my chargers to work with Note 10.1
Thanks

---------- Post added at 11:32 PM ---------- Previous post was at 11:30 PM ----------

Pl post with picture & a diagram explianing how to do this. I have Note 10.1 & ipad3 chargers

Quote:
Originally Posted by MRBR7

Going to add an update method i discovered.
Just need to connect red power and earth no data lines or resisters are necesary.
Put a on/off switch on the earth to cut it.
First apply power with earth connected..
When get the red x...
Simply dis connect the earth and re apply via your switch.
When its re applyd this forces AC Charge mode from having red x before...
Have tested this using both 2amps and 1/2amp @ 5 volts.
Method works on both...
Try it and let me know,it works on my 7.7 tab...

1st January 2013, 07:03 PM |#15  
Junior Member
Thanks Meter: 0
 
More
Thumbs up worked on Tab 10.1 and Ace
Thanks for pinouts tutorial (original on first page), it worked for me for:
- SG Tab 10.1 (P7500)
- Samsung ACE (S5830)
21st January 2013, 06:45 PM |#16  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by MRBR7

Going to add an update method i discovered.
Just need to connect red power and earth no data lines or resisters are necesary.
Put a on/off switch on the earth to cut it.
First apply power with earth connected..
When get the red x...
Simply dis connect the earth and re apply via your switch.
When its re applyd this forces AC Charge mode from having red x before...
Have tested this using both 2amps and 1/2amp @ 5 volts.
Method works on both...
Try it and let me know,it works on my 7.7 tab...

If you cover the D+ D- with a piece of paper it'll do the trick
Last edited by lil_nokie; 21st January 2013 at 06:51 PM.
11th March 2013, 08:23 AM |#17  
TheWerewolf's Avatar
Senior Member
Flag Surrey, BC
Thanks Meter: 153
 
More
For the record, having the charger provide more than 2A isn't actually dangerous. The tablet should only draw what it needs.

Then again, the fact that Samsung did something this goofy means they could easily have it overdraw by assuming any charger that has this is 2.1A or less, so the advice is probably good either way. But iPad chargers which deliver 2.1A should be safe.
14th March 2013, 04:35 PM |#18  
Abdulla_91's Avatar
Member
Flag Damascus
Thanks Meter: 14
 
More
you did great job thanks
you make this too easy for us ....
THANKS , REGARDS
15th March 2013, 01:18 PM |#19  
Junior Member
Flag Brampton
Thanks Meter: 7
 
More
Recently bought a used 10.1 that came without a charger.

Just successfully did this to use any usb charger.

Thanks OP!
Last edited by TheDoctah; 15th March 2013 at 01:20 PM.
15th March 2013, 01:39 PM |#20  
zuberio's Avatar
OP Senior Member
Flag Mississauga, ON
Thanks Meter: 205
 
More
Quote:
Originally Posted by Abdulla_91

you make this too easy for us ....
THANKS , REGARDS

Quote:
Originally Posted by TheDoctah

Recently bought a used 10.1 that came without a charger.

Just successfully did this to use any usb charger.

Thanks OP!

You're welcome
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes