[Q] i Brick my phone

---

hi all,

i've used flahtool and use the flash mode. my phone is in .62 firmware EU

i've used this flashtool package from a modded ICS firmware >> http://forum.xda-developers.com/show....php?t=1518563

- Flashtool package: Flashtool package This includes baseband .70 and userdata etc from official ICS

after using this flashtool package my phone do a boot loop

my phone is root and i've installed CWM

how to unbrick my phone ?

ps : my english is bad i'm french.

It must be because of the kernel you are using. I had the same problem with that ROM, I tried several kernels and only bootloops.

Try flashing this kernel via fastboot mode:
http://forum.xda-developers.com/show....php?t=1566871

Then flash ROM KA18 or any other ROM, I am using ICS from team xperia and works great:

http://forum.xda-developers.com/show....php?t=1395192

You need to have an unlocked bootloader to boot custom ROMs. If your bootloader is not unlocked then you can look in the forum for an original ROM and flash it via flashtool.

http://forum.xda-developers.com/show....php?t=1258723.

tanks but my bootloader is locked for the moment i can unlock it...

i want to find a kernel for Android 2.3 for the firmware .62

i don' want to go in ICS for the moment

Try this:

http://forum.xda-developers.com/show....php?t=1258723

If you want to have your phone rooted, flash .42 then root and then use over the air update to go to .62

i get the MT15i_4.0.2.A.0.62_1246-9107.ftf

how to flash ?

Did you confirmed if your bootloader can be unlocked?

Type *#*#7378423#*#* to enter the service menu, then Service info > Configuration > Rooting Status, it should say "Bootloader unlock allowed Yes" if bootloader unlock is not allowed you cannot use fastboot method to unlock it.

sorry but i can't boot my phone

i'm remember is possible to unlock the bootloader

unlock bootloader allowed : yes

Originally Posted by johnstinks

i get the MT15i_4.0.2.A.0.62_1246-9107.ftf

how to flash ?

To flash, just install FlashTool.

Then open flashTool and click on the flash icon, select flashmode. Then in the select folder section selet where you have the ftf file, click OK and follow the instructions on the screen.

Originally Posted by sdato001

To flash, just install FlashTool.

Then open flashTool and click on the flash icon, select flashmode. Then in the select folder section selet where you have the ftf file, click OK and follow the instructions on the screen.

no risk to brick the phone ? ( i mean no boot )

Originally Posted by johnstinks

no risk to brick the phone ? ( i mean no boot )

man this is almost a chat, ask in Q/A and go to general chat and this is already posted !!
try to search and open your mind, and we dont know for sure of you brick your phone, give it a try and see