How to Root Galaxy S2 GT I9100GDXLP6 on ICS 4.0.3 Firmware
Procedure to Root Galaxy S2 GT GT I9100GDXLP6 ICS 4.0.3 Firmware:
1: Download the attached files GT-I9100G_LP7_ClockworkMod-Recovery_22.214.171.124 and Root.zip and Odin can be download from anywhere.
2: Turn Off your phone so that it can be entered in the Download mode.
3: Download mode in Galaxy S2 GT I9100G can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button after which you will get to see a green robot indicating that the device has entered in the download mode.
4: Connect your phone to computer with the help of original USB cable and the ID : COM section in odin show turn yellow.
Note: If the ID : COM section doesn’t turn Yellow, Just install kies
5:Click on “PDA” to select “GT-I9100G_LP7_ClockworkMod-Recovery_126.96.36.199.tar” and click on “Start” for starting the process of rooting Galaxy S2.
Once the device gets rooted successfully, the phone will be rebooted, Once the home screen is seen, disconnect the device and turn off the device. Make sure you have copied the root.zip file into your sdcard before you turn off the device
6:Now boot into the recovery mode, which can be done by simply pressing Volume Up Key, Center button, and holding both simultaneously press the Power Button.
7:In recovery mode, selectSelect “install zip from sd card” > “choose root.zip from sd card” which you have placed in your phone. then Click yes to install
Now Reboot the mobile
Tip: If the device gets into the boot loop mode or refuses to turn ON, then re insert the battery and follow the instructions from the start.
Congratulations, you have now successfully rooted your Galaxy S2 GT I9100GDXLP6 on ICS 4.0.3 Firmware