Problem Fera NG urgent!!!!!!!

---

i have a problem.....i don't know if this problem is caused by Rom but.......sometimes, and more and more often, I don't get the message or
arrive after a few hours!!!

any solution?

thxx

Yes this is Also my Problem you have to restart the phone to receive it is there any FIX to this? I Think its not in the Network

Originally Posted by jrchan01

Yes this is Also my Problem you have to restart the phone to receive it is there any FIX to this? I Think its not in the Network

yess i must reboot the phone too many times a day........

reflash baseband .71?? u should try that

As said before

---

Random Reboot problem is it?

As FeraVolt senior said before in thread sourced

"FeraKernel is integrated in this rom and overclocked till 1113Mhz so if your phone cant handle this frequencies (reboots or wlods happening) then flash another stock kernel. (Don't forget wifi modules)"

Which means not all X10 can use NG ROM pretty smooth. Your X10 probably can't handle strength of the Kernel, or not suitable to be overclocked too much..So try use Stock Kernel (non-overclocked 998MHz).

*If You still locked bootloaded, just full wipe, clear cache partition, should get back the stock kernel. As long it's locked bootloaded, the kernel still there.

*If Unlocked Bootloaded, get kernel here (pre-rooted) and flash it via Flashtool after placed it under subfolder "firmwares".

For wifi moduleHere and flash it via xrecoveryGood Luck

whitefang

I Reflashed the Baseband .71 and I think it solved the problem

if you seems a lot of problem on Fera NG, change other ROM.
may solve your problem :)

Originally Posted by jrchan01

I Reflashed the Baseband .71 and I think it solved the problem

goodddddddddd thanks have you flash baseband with flashtool???

reflashing the baseband didnt help me .. ;(

Originally Posted by thran8

reflashing the baseband didnt help me .. ;(

try reflashing the rom....but...first you must use PcCompanion and go back 2.3.3 and then flash the feraRom with all wipe(As explained in the installation guide.....follow the guide)