[RECOVERY][CWM] Completely stock ClockworkMod 5.5.0.4 (7/6/12)

---

This is a clockworkmod recovery built completely from source. It has the latest cwm updates and the latest ics kernel (eMMC erase bug fixed). This should also have the hanging backup bug fixed. I havent had time to make a billion backups to test this but the few i did without the .hidenandroidprogress file worked like a charm :) If you do get a hanging backup that is all koush's fault as i just used his latest sync to cwm.

To get adb working on this:
add these lines to "C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver\android_winusb.inf"
-add them in the section that says [Google.NTx86] and the section that says [Google.NTamd64]. just make it look like the ones that are already there but with this code:

;
; Samsung Hercules
%SingleAdbInterface%        = USB_Install, USB\VID_18D1&PID_D001&REV_0231&MI_01
%CompositeAdbInterface%     = USB_Install, USB\VID_18D1&PID_D001&MI_01

- then right click "my computer" and go to device manager
- you will see a driver with a yellow exclamation point...right click it and click "update driver software"
- click "browse my computer"....then click "let me pick from a list of device drivers on my computer"
- then click all devices
- click "have disk..."
- go to "C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver\android_winusb.inf"
- click to allow installation of driver
- presto

so no one tried this?

Excellent.. Thank you... Now if somebody could just put the ADB together with the CWM that would be proper... thanks Man.


Can you *please* elaborate on the instructions for ADB. Just put some WinDex on it... I want my ADB back..


Sent from my SGH-T989 using xda premium

Is this your own version of the CWM included in ROM Manager? Can you make sure it's updated in ROM Manager? It sounds like this one is much better, I hope it becomes default

updated to latest commits by koush

Originally Posted by sk8erwitskil

updated to latest commits by koush

Thank you very much! Your work is much appreciated!

You first lolz

Recoveries made from ics kernels scare me still

Sent from my SGH-T989 using Tapatalk 2

Flashed via Odin w/o a problem here

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!! 
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!

Adb works just fine as well

C:\android-sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
43492893        recovery

C:\android-sdk\platform-tools>adb shell
~ # ls
ls
boot                   init                   sbin
cache                  init.qcom.lpm_boot.sh  sd-ext
charger                init.qcom.sh           sdcard
data                   init.qcom.usb.sh       sys
datadata               init.rc                system
default.prop           lpm.rc                 tmp
dev                    proc                   ueventd.goldfish.rc
emmc                   res                    ueventd.rc
etc                    root
~ #

Made a backup and then restored from backup; all good