Thank you for all your hard work. I am a new to this and you have made it easy for someonelike me just starting to flash custom roms. Followed your guides and now have cm9 on my phone. looks and works great so far. Once again Thank -You

Originally Posted by jsr84

I noticed a small amount of adjustment. I thought I would restore back to GB to compare the sensor using the same app and in GB the app reports the sensor as a "TAOS" sensor in CM9 its reporting the sensor as a "Sharp". In GB the sensor seems to react to different light levels were as in CM9 it wont respond to any light changes.

I know your plate has enough on in with regards to this port, but it was just something I noticed, I'm not even sure if its relevant.

Oh I know how to fix this, it's in the kernel. I'll get to it right away. I notice that the GB kernel has the correct model of sensor (TAOS) but I overlooked it when making the ICS kernel. Thanks a lot for the useful info.

I believe this will also fix the proximity sensor because apparently these 'optical' sensors are dual purpose.

I'll have a fixed build by the evening.

Originally Posted by dsixda

Oh I know how to fix this, it's in the kernel. I'll get to it right away. I notice that the GB kernel has the correct model of sensor (TAOS) but I overlooked it when making the ICS kernel. Thanks a lot for the useful info.

I believe this will also fix the proximity sensor because apparently these 'optical' sensors are dual purpose.

I'll have a fixed build by the evening.

Good stuff!! It will probably fix the black screen at the end of a call, the sgs3 has an aokp rom, I'm gonna give that ago at porting, it's like the ultimate customizable rom even more than cm9. Figure if more of us can figure out to do what you do dsixda, it'll give you a much needed break

Sent from my SGH-I757M using xda premium

hope it works for e120l

Thanks for all of your hard work on this and the other ROM!

I am (still) getting errors when flashing to my phone. I get this when trying to flash:

assert failed: getprop("ro.product.device") == "SGH-I757M" ||
getprop("ro.build.product") == "SGH-I757M" ||
getprop("ro.product.device") == SGH-I757" ||
getprop("rp.build.product") == "SGH-I757M" ||
getprop("ro.product.device") == "celoxhd" ||
getprop("ro.build.product") == "celdoxhd"
E: Error in /sdcard/update.zip
(Status 7)
Installation aborted.

Here's what I've done:

1. Wiped data, cache, dalvik cache for each step below
2. Tried to install from SD card
3. Tried to install from internal storage
4. Tried renaming to update.zip
5. Tried flashing the stock ROM and upgrading from there
6. Tried a new download of the .zip

Let me know if any other information would be helpful.

Originally Posted by assortiment

hope it works for e120l

See the big bolded warning on post #1.

Originally Posted by ZarboktheMunificent

Thanks for all of your hard work on this and the other ROM!

I am (still) getting errors when flashing to my phone. I get this when trying to flash:

assert failed: getprop("ro.product.device") == "SGH-I757M" ||
getprop("ro.build.product") == "SGH-I757M" ||
getprop("ro.product.device") == SGH-I757" ||
getprop("rp.build.product") == "SGH-I757M" ||
getprop("ro.product.device") == "celoxhd" ||
getprop("ro.build.product") == "celdoxhd"
E: Error in /sdcard/update.zip
(Status 7)
Installation aborted.

[/LIST]
Let me know if any other information would be helpful.

You missed Step 3 in installation instructions?

Originally Posted by ZarboktheMunificent

Thanks for all of your hard work on this and the other ROM!

I am (still) getting errors when flashing to my phone. I get this when trying to flash:

assert failed: getprop("ro.product.device") == "SGH-I757M" ||
getprop("ro.build.product") == "SGH-I757M" ||
getprop("ro.product.device") == SGH-I757" ||
getprop("rp.build.product") == "SGH-I757M" ||
getprop("ro.product.device") == "celoxhd" ||
getprop("ro.build.product") == "celdoxhd"
E: Error in /sdcard/update.zip
(Status 7)
Installation aborted.

Here's what I've done:

1. Wiped data, cache, dalvik cache for each step below
2. Tried to install from SD card
3. Tried to install from internal storage
4. Tried renaming to update.zip
5. Tried flashing the stock ROM and upgrading from there
6. Tried a new download of the .zip

Let me know if any other information would be helpful.

What version of CWM are you using?

Well that's embarrassing. That was the issue. I thought I had flashed the newest one the other day but it turns out I grabbed a previous download by mistake.

I noticed that both under Performance settings and using some overclocking apps on the market that the maximum CPU frequency is set to 1836 MHz, and cannot be changed(always reverts). Unless I've been misinformed isn't the default maximum CPU frequency 1.5GHz? If so isn't it a bit haphazard to have it set so high above the normal by default?

Originally Posted by Cr15py

I noticed that both under Performance settings and using some overclocking apps on the market that the maximum CPU frequency is set to 1836 MHz, and cannot be changed(always reverts). Unless I've been misinformed isn't the default maximum CPU frequency 1.5GHz? If so isn't it a bit haphazard to have it set so high above the normal by default?

I noticed that too and I wouldn't do that intentionally. In fact I don't even know how to overclock in the kernel! Not a big issue IMO, but I'll look into it when the big issues have been fixed. Thanks