ParanoidAndroid 3.15a - 4/6/2013 - Basic source update. Pulled newest and latest PA sources. Please check the PA page for their full changelog.
ParanoidAndroid 3.15 - 3/24/2013 - Basic source update. Pulled newest and latest PA sources. Please check the PA page for their full changelog.
ParanoidAndroid 3.10 - 3/4/2013 - Will update tomorrow... need sleep
ParanoidAndroid 3.0 - 2/20/13 - Take three... Another stability release... I told you guys there was a lot of working that needed to be put into this to get it working correctly on our device. Fixed APN force close. Fixed Wifi tether. May have fixed USB tether (let me know). Fixed FC when selecting USB connections from settings - storage. Added CPU boosting. Fixed tethering issues on startup. Added storage manager to tablet mode (able to use USB correctly). pulled latest PA source code.
ParanoidAndroid 3.0 - 2/20/13 - Take two... Stability release to fix issues from the initial 3.0 release. Fixed deep sleep issues, BT should now be functional, Fixed kernel to better work for an AOSP build. Stability changes made throughout the build to suite our device. Intentionally broke USB tethering for now.. Want to see if that is the cause of the couple of notification pull down freezing issues that have been reported.... For those of you that were having the issue, please let me know if you noticed any difference. Id suggest upgrading to this build as battery life should be improved.
ParanoidAndroid 3.0! - 2/18/13 - Thats right! Paranoidandroid is back to the infuse!! Based off AOSP 4.2.2 source. Huge thanks to the ParanoidAndroid team for this awesome beautiful piece of work that we were able to get working on our device. Words wont describe it, you need to flash this to experience it for yourself! - Everything should be working for the most part... There were alot of changes/patches i needed to add in order to get this working on our device. As of now, Bluetooth is completely busted. I havent looked at it much, but it shouldnt be to tough to fix. Ill get working on that tomorrow. Do not use this if you need to use bluetooth!!!!
ParanoidAndroid - 11/18 - For those of you that were reporting issues (reboots) from the previous build, this is an update for you. Download and Flash this Kernel
. I reverted some of the minor changes that more then likely caused the trouble. I have no idea why some of you were having horrible problems and why some of you were not, but i guess that pretty much indicates how horribly F'ed our kernel is and that the smallest freaking change causes havoc for some users. Going forward, im not even touching the kernel or looking into changing anything kernel wise unless its a standard cm change for ALL samsung kernels.
ParanoidAndroid - 11/04 - First and foremost... Fixed my mistake that took away the 8mp option for camera... That is now back (thanks to everyone that pointed it out). Next... OC kernel has been migrated into main kernel. That means no more separete OC kernel. Just one kernel with 1400 and 1600 mhz steps. Now... With this option added, Please use caution using those levels and use common sense. If the phone reboots or you have any issue at 1600 and think that something is wrong with the build, please change frequency back down to stock 1200 and if it stops, then obviously oc isnt working good for you. DO NOT REPORT IT as a bug in the build! JT added an option into the cm source files that allows us to set long press actions from the lock screen. Its pretty neat... You can specify values such as flashlight control and media controls from the capacitive keys and to activate, just long press whichever button you set. That option can be found in settings - lockscreen. I optimized more of the kernel values (again) and gave us an extra 13 MB of RAM. I updated wifi drivers again. There have been a small number of reports that when the phone goes into deep sleep and then they wake, wifi does not reconnect. Im not sure if the wifi update fixed that or not, but if you happen to be one of the few that experience this issue, just download and use wifi fixer. I tested it with no issues or complaints. Updated kernel compression/decompression files. Added encryptable footer (fixes cryptofs errors in logcat). Enabled expandable desktop option. Few kernel changes/optimizations here and there. Merged latest PA/CM source code which includes alot of fixes for the color layout from paranoid android settings menu.
ParanoidAndroid - 10/28 - WOW! This seemed like a small update at first, but it got huge. Not only from changes on the source on our end, but also the changes on the PA side. Lets start off with the big things... The reboot into recovery when applying your settings issue has been FIXED. There is no longer an OC kernel... Why you ask? Because I added the OC options to the stock kernel and it is stable as before even when using the OC features. Added a few fixes device side for auto brightness (should make it a little better) and also camera. Reverted one or two questionable changes to ensure stability. Added a few changes on the kernel side to make dvfs code more efficient, fixes for wifi (only a couple minor ones.), update touchscreen driver, update kvm code to handle pages more efficiently. Corrected the camera preview/picture sizes (they seemed to be off before). Removed unused/unsupported code on device side. Added overlay config for the home key to unlock device feature to work correctly and the option is found from settings - lock screen - screen security - home unlock. Oh BTW.. latest PA source has been merged... They have been busy. They have added a new option to the Paranoid Preferences menu called 'Colors'.. It basically just automatically changes the status bar color for different apps you open. It is pretty neat. They have added a ton of other customizable features as well... Honestly... Im not sure what else they can come up with...
ParanoidAndroid - 10/22 - Will update in the morning... I need sleep right now. Download it and find out for now.
ParanoidAndroid - 10/19 - We now have Dock audio! Big thanks to araemo for getting dock audio working correctly. The dock audio feature can be found from settings - advanced - dock. Fixed the delayed capacitive keys... Very rarely sometimes when locking the phone, the screen would flicker back on and then capacitive keys would be delayed before becoming responsive. I claimed to have fixed it last build, but im almost certain that i definitely fixed them this time. I patched a few files in the kernel that were causing issues which should make the build even more stable (not that it wasnt before). Fixed an issue with our calibration driver not reading the correct file on boot up... It is now set to correct path and reads the file as it should. Pulled kernel wireless drivers from siyah kernel. This should improve wifi usage and get us a little more up to date with current sources (we still got a loooong way to go). Added ISO options to camera thanks to a commit from JT. Merged latest PA/CM source. Set up Goo.im, you can find me under devs - scotthartbti. I have modified the build.prop to accomplish OTA updates for next release.... And i think that about does it.
ParanoidAndroid - 10/14 - Updated build already? I think so! This build is mainly little bug fixes and missed things from the 4.1.2 source merge, but there are some key things from our device end that make it worth downloading. I optimized our kernel code a bit and freed up about 35 - 40 mb of RAM without sacrificing anything at all. I believe i have fixed the delayed response keys that would very intermittenly show up (most of u probably have never noticed), I have enabled installation of unknown apps by default (was tired of having to enable it everytime id restore from titanium)... I know there are a few other small things im missing, merged latest PA/CM source.
ParanoidAndroid - 10/11 - Android 4.1.2 is here and ready to go on the infuse! Please search for Android OS changes from 4.1.1 to 4.1.2 as im not going to list every single change they have made. I have fixed up the power HAL this build, should be fully functional now (Thanks araemo). Added zRam, which is enabled/disabled from settings - performance. Slight clean up in device tree. Made a change that should improve GPS lock time. Everyone that i had test it reported improvements.... remember, it may still take a minute or two for the initial lock, but after that it should be good to go, atleast it was for myself and the people who tested. Merged latest PA/CM source code. *** Previous GAPPs will work, no need to go searching for newer GAPPs.****
ParanoidAndroid - 10/5 - New partition layout to increase /system to 400mb to avoid any possible space issues. We previously had 350mb and we were cutting it very close! Added power HAL for our device and also added pulse boosting to the ondemand governor... Its pretty nice. Few minor fixes here and there. Lockscreen has a transparency option. Notification toggles have been added to notification list. Nav keys have customizable options added to them. Cleanup, bugs fixed. Merged latest PA source code. - PLEASE READ THIS BEFORE DOWNLOADING AND FLASHING!!!!: I had people test the following install and they left their external SD cards in the phone and had no issues, but if you do have an issue, remove external sdcard and try again. This latest build has been repartitioned so that /system is larger. system was previously 350mb and we were running out of space, so in order to avoid space issues, /system has been increased to 400mb. Now, since the partitions have changed, that means that they are going to wiped out and setup again when you flash the zip. This is going to cause the same behavior as the initial bml to mtd conversion flash. If you are on the previous MTD partitions, When you first flash, it will give you a warning message saying that your data will be erased in converting and you must flash again to and stop and you will see the dead android guy. This is just a warning message and is meant to be seen!!!. You will then need to flash again and this time it will start the conversion and then reboot into recovery and finish the conversion and then reboot into recovery again when it is finished. If you are on BML and converting to MTD for the first time, once you flash the package it will just start to install and reboot 2 times during the install process. When it comes back up the second time, you are finished and can proceed. You can then install GAPPs if needed or just boot up like normal. One last FYI... If you use an OC kernel, you need to use the newest one with the new partitions laid out or your gonna have some issue. Do NOT use old OC kernel on this new build.
ParanoidAndroid - 9/27 - Fixed Battery drain issue from 9/23 build that was removed. Fixed data indicator issue. Added support for suspend mode in charging, merged latest source - USB Tethering is now working thanks to thebecoming! Reverted a couple changes that i believe was causing issues for a couple people on last build, you guys should be good now. Added smartassv2 and interactive governors. Tweaked Conservative governor (thanks entropy). Cherry picked a commit for promixity sensor settings from phone - settings. Various upgrades to kernel. Merged latest PA source code.
ParanoidAndroid - 9/15 - Bunch of changes... Merged a bunch of aries changes that were previously overlooked.. Fixed the MMS issue that random people were having... araemo fixed torch.. it is now functioning perfectly and the torch app is included.. the other flashlight app has been removed. Thanks araemo! remapped search key to work with hardware key options... Updated the kernel bt drivers which in turn fixes the BT disconnect issue a few have reported.. merged latest PA source code... Updated to latest ParanoidPreferences.. A bunch of other things i forgot.
ParanoidAndroid - 9/6 - Paranoid Settings app has been giving an overhaul. They have added an extra option from the app. It gives you even more ability to completely customize things as you seem fit. Added LED flashlight app from market. It works as it should. PA wall papers have been added. Cleaned up the kernel code a bit... Nothing major. All latest PA source code has been merged. Few little things here and there.
ParanoidAndroid - 8/26 - Added OC kernel option to main page. Has 1400 and 1600 mhz steps. Seems pretty solid from stress testing and feedback from the test team. Give it a try. Cleaned up a little more of the source code in our tree, changed some of the MMS values in the overlay.
ParanoidAndroid - 8/25 - Not much physical change, but tons of changes/fixes to make things better. Now able to see Data Usage from settings menu. GPS locks crazy fast and is accurate as its supposed to be. Wifi Tether completely works. Quite a few kernel patches. Revamped the sensor code for our device. Added overlay to predefine a few apps such as MMS and Trebucet. Merged latest PA source code. You know you want this.
FYI... I am debating uploading my OC kernel i just created.. Frankly i dont think its needed and dont agree with it, but the people seem to want it and who am i to stop them.
ParanoidAndroid - 8/18 - This is not an official PA update, this is more of a personal fix things and make it better update. I have added 2 new layouts to the Paranoid Preferences configuration menu.. The option are now Stock, Hybrid, Phablet small, Phablet mid, Tablet small, and Tablet mid. Wifi tether is now partially working.. For whatever reason it doesnt work when you set security, but if you set it up as open, it works fine. Changed out the GPS script.. Users have reported faster lock times and more accurate location fixes. This was created by Marty331 and all credit goes to him. Merged the latest PA source code. Removed alot of the bloat files to make the zip package alot smaller then before and free up space. Enabled back to kill button. And a few other things i cant think of right now.
ParanoidAndroid - 8/15 - Jellybean ParanoidAndroid has begun! This has been compiled from CM10/ParanoidAndroid source code. This is a starting point for a ROM that is complicated as is... So you may run into an issue here or there. Enjoy!