5,596,700 Members 46,572 Now Online
XDA Developers Android and Mobile Development Forum

[Kernel][Roms][TW/MIUI/CM9-10][Aroma][Menu][Dual Boot 5Roms GT-N7000 v2.3c [10-27-12]

Tip us?
 
chuandinh
Old
(Last edited by chuandinh; 10th November 2012 at 05:46 AM.)
#1  
Senior Member - OP
Thanks Meter 405
Posts: 264
Join Date: Sep 2008
Talking [Kernel][Roms][TW/MIUI/CM9-10][Aroma][Menu][Dual Boot 5Roms GT-N7000 v2.3c [10-27-12]

Finally, I finished creating my scripts & kernel for booting a rom on SD Card. Dual boot kernels, preinstalled roms, setup scripts, instructions are available below.

How to make a rom on SD Card
Requirements: 3.1 GB of free space on your internal SD Card.

New method to set up the rom, fast and easy. You can now boot 5 different roms

Here is some new kernels you can try, but the setup in the Aroma v2.3c package below

PhilZ-cwm6-XXLS7-XJB-3.1-dualboot.zip (support only TW JB roms)
http://www.mediafire.com/?os6zi3u2mpe6yih

PhilZ-cwm6-XXLS2-XJB-2.7-dualboot - thanks to Phil3759 (support only TW JB roms)
http://www.mediafire.com/?k574667whh3c6qk

Hydracore v6.2 beta3 OC - dualboot kernel
http://www.mediafire.com/?0w852y7hl5yf8k8

Hydracore v5.4 - dualboot kernel
http://www.mediafire.com/?iawqi5picfcb9sm -STD
http://www.mediafire.com/?w18xigwkd9ya4no -OC

Download this current Aroma version

Version 2.3c http://www.mediafire.com/?5ym62wr7kta1u2o
- Added Timeout 15 seconds for the Boot Menu
- Fixed issue with the rom3 external in the Boot Menu
- Added Option to fix root in page 2 of the tools section.


Version 2.3b http://www.mediafire.com/?g3g8hdc2n0j3u9v
- Added Hydracore v4.3b kernels
- For some users, if you don't see the bootsdrom.cfg in the \sdcard\SDRoms folder, simply extract it from the Chuan_Dualboot_Aroma_v2.3b.zip (in the Default folder) and put the bootsdroms.cfig in the \sdcard\SDRoms to enable the dualboot roms.
- For some users, if you want to show the boot menu, you can put an empty file named "bootmenu_on" in the \sdcard\SDRoms folder.

Version 2.1b http://www.mediafire.com/?7aqibjh5nhgnh6m
- Added Hydracore v4.1b kernels
- Possible fix for the bootsdrom.cfg not being extracted for some users

Version 2.0 http://www.mediafire.com/?y0gsnzmwb7e8r6z
- Added Hydracore v3-5 kernels
- Fixed issue setting up the rom partition images on the external SDCard.

Version 1.9-1 http://www.mediafire.com/?foumtinhrhid2c6
- fixed the issue that the STD kernel always being flashed when select the OC one.

Version 1.9 http://www.mediafire.com/?ykvjahj8d32pcdv
- Added Hydracore v3-1 both OC and STD versions.
- Add boot menu options. This can be turned on and off in the "Set Default Booting Rom" section in the dualboot Aroma.
- More checking in the mount partitions tool to make sure we don't mess-up the phone rom. Again, if you see any error, don't flashing any rom/mod, otherwise it will mess up the main phone rom.

Version 1.8 http://www.mediafire.com/?lpxesvw31u3es6a
- Use a new method to mount the partitions for a rom on SDCard. Now you can directly flash new roms without messing up the phone rom.
- Clean up other versions, they seem to be obsolete now.


How to setup and flash a new rom for booting from SDCard

Please follow the instructions below, this is the most easiest ever!!! There is no need to modify the rom or mod before flashing with my tool.

1. Back up your data (just in case)
2. Reboot to recovery and flash Chuan_Dualboot_Aroma_v1.8.zip
- Select Tools section. Then select the rom slot you want. If this is the first time you use that rom slot you need to setup system, data, and cache images for the rom. In page 1 of the tool, check "Setup System" and "Setup data & cache" to setup the images. You need to do this only one time
- In page 2, select "Wipe system", "Wipe data", and "Wipe cache"
-And the most important one, select "Mount Partitions". Don't forget to select "Mount Partitions" otherwise it will overwrite the data and mess up your phone rom.
-Press Next until complete, and don't reboot the phone. (If you see any error, reboot in to recovery and try again)
3. Make sure you don't see any error in the step 2. then you can now flash any rom you like as normal. It will be flashed to the rom slot you just select in the step 2. Don't reboot after complete because you need to flash a dualboot kernel after.
4. Flash Chuan_Dualboot_Aroma_v1.8.zip again, then select "Set Default Booting Rom", then select the same rom slot in step 2.
- Then select "SDCard" as default, and select "Don't Share"
- Then click "Yes" for the popup "Flash a Dualboot Kernel?" to flash a dualboot kernel. You have to flash a dual-boot kernel because in step 3, the kernel has been changed after flashing a new rom.
- Next select "HydraCore v1-7" this can boot most roms, Or you can choose "Goku v1.5-11" only CM9 & TW.
- Click "Next" till the end, and reboot the phone.

5. Now the phone should boot in to a rom on your SDCard.

Tips: To switch the rom, flash Chuan_Dualboot_Aroma_v1.8.zip again, and then select "Phone" as default in the "Set Default Booting Rom" section.
Or you can keep pressing and un-pressing the HOME BUTTON at boot.

Enjoy flashing and new roms, and good luck to you!!!!!


Here is the tutorial how to flash mods/themes, just a little bit different from flashing the rom.

1. Back up your data (just in case), you may also backup the rom folder in the SDRoms folder you want to flash a mod.
2. Reboot to recovery and flash Chuan_Dualboot_Aroma_vXX.zip
- Select Tools section. Then select the rom slot you want. Skip Page 1, Then in page 2, select "Wipe dalvik-cache" only
-And the most important one, select "Mount Partitions". Don't forget to select "Mount Partitions" otherwise it will overwrite the data and mess up your phone rom.
-Press Next until complete, and don't reboot the phone. (If you see any error, reboot in to recovery and try again)
3. Make sure you don't see any error in the step 2. then you can now flash any mod you like as normal. It will be flashed to the rom slot you just select in the step 2.
- Click "Next" till the end, and reboot the phone.

4. Reboot the phone and boot the rom you want.

FAQ
1. I get an error, what should I do?
- Reboot into recovery, and start over
- If still get the error, Flash "HydraCore v1-7" kernel, and reboot into recovery, and start over
- If still get the error, save the recovery log and post it here.

2. How do I reset the rom on SDCard?
- Flash Chuan_Dualboot_Aroma_v1.8.zip, then select "Tools", select the rom slot you want to reset, skip page 1, then select "Wipe data", and "Wipe cache" in page 2. Then next until finish.





Credits and special thanks to:
- Hardcore for his SpeedMod N7000 ICS.
- superatmos for his TUTORIAL Building Kernel from source
- criskelo for some aroma scripts
- g.lewarne for HydraCore Universal kernel
- funky81 for first CM9 & TW kernel
- ashwin123 for Video Tutorial
- Samsung and developers for some wonderful roms.

WARNING: I've tested and used my scripts and modified kernels on my phone without any problem. There is always a risk when flashing a kernel or a new rom, so flash as your own risk. I have no responsible for any damage to your phone


Pre-install Roms

To make it easier, I have some pre-install roms on SD Card for you guys. Just extract it then it's ready to go.
1. flash pre-install rom
2. flash dualboot kernel
3. reboot
Now you should be able to boot your current rom (samsung ics only) and the pre-install rom on your sd card. Keep press/unpress the home button at boot until you see the boot animation to switch the rom. Check the log and the config file in the SDRoms for more details.

Pre-installed Cassies_XLR_ICS_V4_LQ3 rom - thanks to thering1975
https://docs.google.com/open?id=0BwD...XZ0dzc3RHNSb2c


Pre-installed [ROM][TABLET/HYBRID]STAXXTANIUM-PARANOIDANDROID. V1.7 - Original Thread - thanks to Staxxthedan
How to Install
- Backup or rename /sdcard/SDRoms/rom1 folder if you have any previous rom on your SD Card.
- Flash sd_internal_preinstall-rom-PARANOIDANDROIDv1.7.zip or extract the SDRoms folder to root folder on your internal SD Card
download link https://docs.google.com/open?id=0BwD...y04S0I4eGtrV1k
- Flash cm9_stock_kernel_dualboot.zip to boot the CM9 rom on your sd card
download link http://www.mediafire.com/?gkgvl950d38ka9c
- Reboot, and wait for the phone to boot in to PARANOIDANDROID rom

Pre-installed Preinstalled-Liquid_Black_V 3.2 - Original Thread - thanks to firasusman
How to Install
- Backup or rename /sdcard/SDRoms/rom1 folder if you have any previous rom on your SD Card.
- Flash Preinstalled-Liquid_Black_V 3.2_rom1.zip or extract the SDRoms folder to root folder on your internal SD Card
download link https://docs.google.com/open?id=0BwD...1FuMnh0M2otVG8
- Flash any Samsung ICS dual boot support above (not CM9 kernel) to boot the rom on your sd card.
- Reboot, and wait for the phone to boot in to boot rom on SD Card.

Pre-installed [ROM][JB 4.1.1] PARANOIDANDROID v1.2 [TABLET/HYBRID][CM10] - Original Thread - thanks to imilka
How to Install
- Backup or rename /sdcard/SDRoms/rom1 folder if you have any previous rom on your SD Card.
- Flash PARANOIDANDROID v1.2 [TABLET/HYBRID][CM10]_rom1.zip or extract the SDRoms folder to root folder on your internal SD Card
download link https://docs.google.com/open?id=0BwD...mR3RWZxbG4wQ2s
- Flash cm10_kernel_dual_new.zip to boot the rom on your sd card
download link http://www.mediafire.com/?da4cuozus6tdlv3
- Reboot, and wait for the phone to boot in to PARANOIDANDROID v1.2 rom
- Note: Flash any kernel that works with your phone rom to boot back your phone rom.

Pre-installed CM9 Stable Aroma can select 1 of the 5 rom slot via Aroma. Hope someone can help post more pre-installed roms by replacing the system.img.
You can dual boot this rom with any TW rom using the Goku v1.5-11 kernel.

https://docs.google.com/open?id=0BwD...jl5dWVqZnNzc2M


Pre-installed Roms by REVERSiN Sep-3-2012

CM10 - Preview5 UNOFFICIAL : https://docs.google.com/open?id=0B-F...FVocmdYMFJwcVE

PARANOiD - JB - v1.911 BugFIX : https://docs.google.com/open?id=0B-F...jgzSEhrelJjbm8


Pre-installed Roms by yats86
ParanoidAndroid 1.3 [JB][TABLET/HYBRID]
Link to download rom: http://www.4shared.com/zip/BxEHxBRC/...l-rom-PAR.html
Mirror: http://www.MegaShare.com/4496353

TMT Midteam 2.2 ICS 4.0.4
Link to download rom http://www.4shared.com/zip/_8VkyH18/...l-rom-TMT.html
Mirror: http://www.MegaShare.com/4496423

CriskeloRomNOTE.vICS-V11.2
Link to download rom http://www.4shared.com/zip/6DPerI8k/...l-rom-Cri.html
Mirror: http://www.MegaShare.com/4496472

More roms will be added later.....

How to make a pre-installed rom
- After setup a rom and copy the system partition to SD Card. You can simply replace the system.img file in any of my pre-installed rom with your system.ing then upload the zip and share with your community. Thank you to anyone who can help with this.

---------------------------------------------------------------------------------------------
Intramfs Source
http://www.mediafire.com/?sk31d47jeh7q2sy - initramfs source for my dualboot1.0 feature.
http://www.mediafire.com/?oob18xxqit8cqmy - initramfs source for my dualboot3.1 feature.
The Following 94 Users Say Thank You to chuandinh For This Useful Post: [ Click to Expand ]
 
chuandinh
Old
(Last edited by chuandinh; 1st September 2012 at 12:19 AM.)
#2  
Senior Member - OP
Thanks Meter 405
Posts: 264
Join Date: Sep 2008
Old Version
Code:
Version 1.7 http://www.mediafire.com/?5w03c1q49wppbgb
 -Added HydraCore v1 - big thanks to g.lewarne who makes this universal kernel working for all roms TW, MIUI, CM9, CM10. Now you can use this kernel to dual boot any rom you want. 
 -Added latest CM10 kernel. 


How to modify rom and directly flash it using the Mount Partitions Tool.  
Most of MIUI,CM9,CM10 roms have the format command which is not safe for directly flashing a rom on SD Card. Follow this instruction to remove the format command.
1. Extract the rom
2. Then edit the file META-INIF\com\google\android\updater-script using Notepad++
3. Take out the format command format("ext4", "EMMC", "/dev/block/mmcblk0p9", "0"); if there is any
      You may also take out all the mount, unmount, kernel flashing, and modem flashing or any command that is related to mmcblk.
4. Compress/Zip the rom back. Now you have the modified rom. 
5. Now it ready to flash using the mount tools. Boot recovery, run my dualboot aroma, select tools.., select a rom to flash, in page 1 select wipe system, data, and cache, then in Page 2 select mount partitions for rom on SDCard. Don't reboot after run the script. If don't see any error or fail. Then go ahead flash the modified rom. It should directly flash it into the rom you just pick. Now flash a dualboot kernel you like and enjoy your new roms. 

Note: Do the same for any mod, except you don't need to modify the mod, just run the mount tool and flash the mod. 

How to Setup
1. Flash a rom you want, make sure follow the instructions of the rom you want to flash. Otherwise you will get a brick.
2. Run (flash) Chuan_Dualboot_Aroma_vXX.zip, then select Tools, then select rom slot (1 out of 5 slots) you want, then select "Copy system to SDCard" and "Wipe data & cache". This tool will copy your current rom to SD Card and setup the data.img and cache.img for the rom on SDCard. I takes about 5 to 10 minutes to process. (don't reboot after completion)

3. Repeat the step 1 & 2 if for the second, third, fourth, or fifth rom except you need to pick a new rom slot. (don't reboot after completion)

4. Run (flash) Chuan_Dualboot_Aroma_vXX.zip again. Select Default Booting Rom, then select the rom slot you want to boot, then select "SDCard" as default. Then Click Yes to flash a dualboot kernel, pick a kernel you want (make sure it's compatible with the rom you want to boot). Now Reboot, and the phone should boot into a rom on SDCard. 


Video Tutorial - thanks to ashwin123

http://www.youtube.com/watch?v=B6JU08mONHY

Version 1.6 - http://www.mediafire.com/?d7bs7srsecwgm16
- Added Notecore 14.1 kernel
- Added Goku v1.5-11 kernel - thanks to funky81 for the kernel source. This is a very good kernel that supports both CM9 & TW. Now you can dual boot CM9 and TW with this kernel. Keep press/unpress the Home button at boot to switch the rom.
- Added Wipe Tools for the rom on SD Card
- Added Mount partition Tool for the rom on SD Card. This allows you to directly flash a rom or mod on the rom on SD Card. Now you can easily flash a new rom on SD Card, but be careful if you want to use this tool to flash CM9/CM10 roms. There's a format command there, you need to take out before flashing those roms.
- Some fixes for the Tools sections. 

Version 1.5 http://www.mediafire.com/?1493p91bg7z56nk 
-Fixed the CM10 kernel flashing issue.
-Added NoteCore v13-4

Version 1.3 http://www.mediafire.com/?3c06hnon548hhh2 
-Added NoteCore v13

Version 1.2 http://www.mediafire.com/?9z0uzof8b532bzb 
-Fixed flashing error in version 1.1

Version 1.1 
- Added Kernel backup/restore options
- Added share data options too. 

Version 1.0 http://www.mediafire.com/?b2i954vve1gh1c4
-Initial Aroma version

-----------Old Method---------------------------------------------------------------------------------------------------------------
1. Backup your current rom and your data just in case something goes wrong and you can recover your data. You can skip this step if you don't need to save anything.

2. Flash any rom you want like you've been doing. This rom will be a rom on your internal SD Card. Just follow the guild from Dev's of the rom you want to flash. Be careful about EMMC brick, please don't wipe using an unsafe kernel. (Skip this step if you want your current rom to be the rom on your SD Card)
Some roms don't auto get root, so just to be sure you can flash this CWM-SuperSU-v0.95.zip

3. Copy rom partition to internal SD Card. You can do it partially or all by flashing the following scripts.
      - copy_rom_to_sdcard_system.zip - copy system partition to SD Card. (recommend flashing this only)
      - copy_rom_to_sdcard_data.zip - copy data partition to SD Card. (not recommended unless you want to copy your current apps & data to SD card and want to restore back from the rom on SD card later)
      - copy_rom_to_sdcard_cache.zip - copy cache partition to SD Card. (not recommended, another script will take care of this)
      - copy_rom_to_sdcard_all.zip - copy all rom partitions to SD Card. (not recommended, take long time to do)

4. Flash sd_internal_rom1_wipe_data_cache.zip to setup a blank data.img and cache.img for the rom on SD card. (only flash this if you didn't flash the above copy_rom_to_sdcard_data.zip and copy_rom_to_sdcard_cache.zip, or copy_rom_to_sdcard_all.zip)

5. Setup the config file for your rom on SD card. 
       - Flash sd_rom_config_setup_3.2b_default_phoneRom.zip to setup the config file for the SD Rom and boot your phone rom as default.
       - Or Flash sd_rom_config_setup_3.2b_default_sdcardRom.zip to setup the config file for the SD Rom and boot your rom on the SD Card as default.
 Remember: if the phoneRom and the sdcardRom are the same base, or same platform (CM9, or ICS, or GB). You can switch the rom by keep press/unpress the home button at boot. 

6. Flash dual boot support kernel to boot the rom on the sdcard. You can flash one of the flowing compatible kernels.
Remember: Do not flash the CM9 kernel to boot the Samsung ICS rom and versus  
   - GL_NOTECORE_V11_dual.zip Standard / OC - Thanks to g.lewarne  
   - dualboot3.2b_speedmod-ics-k3-11.zip  - Speedmod K3-11 with dual boot support for Samsung ICS roms only, set ro.secure=0 for fully adb root - Thanks to Hardcore
   - GL_NOTECORE_V8.1_dual.zip - GL NOTECORE v8.1 with dual boot support for Samsung ICS roms only - Thanks to g.lewarne
   - dualboot3.2_speedmod-ics-k3-9.zip - SpeedMod 3-9 with dual boot support for Samsung ICS roms only.   - Thanks to Hardcore
   - GoKu Kernel 1.4 - I have not tested this myself, but the change log says dual boot support. - Thanks to funky81.
   - cm10_kernel_dual_new.zip  - CM10 kernel from PARANOIDANDROID v1.2 - thanks to imilka. Note: This kernel also works with the Samsung ICS rom except Wifi and Bluetooth issue. Hope someone can fix it. 
   - cm9_stock_kernel_dualboot.zip - stock CM9 kernel with dual boot support for CM9 roms only. - Thanks to CM9 team

7. Reboot and test the rom on your SD Card. Make sure you test both roms on the SD Card and your phone to make sure they are working.
     
8. Once you are able to boot the rom on the SD Card, You can now restore your old rom, or flash any new rom you want. 
Remember: If my dual boot kernel doesn't support your new rom, you need to flash my dual boot support kernel to boot the rom on SD card, and you need to flash a compatible kernel with your phone rom to boot your phone rom back. 

Please note that my current kernels with dual boot support work with Samsung ICS or CM9 roms. I have not tested them with any GB rom yet, so be careful when you flash them on a GB rom or a different platform rom.

Video Tutorial - thanks to ashwin123

http://www.youtube.com/watch?v=c9UnqqaPdvo

Aug 09-12
   - First Aroma version support 2 roms on internal SDcard and 3 roms on external SDCard. 
   - Add GL NoteCore V12
   - Add TMT MIUI kernel

Download link: http://www.mediafire.com/?b2i954vve1gh1c4

July 30-12
   - Add new SpeedMod K3-11 with dual boot support and fully adb root.
   - Add Video tutorial - thanks to ashwin123

July-28-12
  - Add new kernel GL NOTECORE V8.1 with dual boot support http://www.mediafire.com/?60lt63qtvfqcs6b
  - Preinstalled Liquid_Black_V 3.2 - https://docs.google.com/open?id=0BwD...1FuMnh0M2otVG8
July-26-12
 - Add new kernel GL NOTECORE V8 with dual boot support download link
 - Re-word the instructions. Much simple and faster to set-up. 


Version 3.2
- Updated to SpeedMod-K3-9 source
- Optimized booting time - (about 6 seconds faster than original SpeedMod-K3-9)
- Add feature to safely share data partition if the two roms are the same base but different mod/theme.
- Update SD Rom by extracting system and data folder to /sdcard/SDRoms/update/ - experiment (report if it works for you)


Version 3.1:
 - Add feature to put the update.zip in the /sdcard/SDRoms/update/ folder for flashing a mod/theme on the SD Rom.
 - Create a file "wipe_dalvik-cache" file in the /sdcard/SDRoms/update/ folder to wipe dalvik-cache on the SD Rom. (simple and fast) 
or  simply flash this http://www.mediafire.com/?690wyv2zt5j7185 ro wipe dalvik-cache on the SD Rom.


Version 3:
- Updated to SpeedMod-K3-7 source
- Add script to wipe data & cache for rom1 on SD Card. You can also save 1.1 GB space with this. This contains empty data and cache partition images and extract them on your SD Card. You can also save a lot of time & space by simply copy the system to sd card, and then flash sd_internal_rom1_wipe_data_cache.zip

     
Version 2:
  - Updated to SpeedMod-K3-6 source
  - Add default rom value in bootsdrom.cfg. Now you can set default rom (phone or sdrom) by changing the default value in the config file.
  - Add CMW restore scripts to restore sdrom back to phone rom. 
  - Some minor tweaks.

Version 1:
  - Initial release
  - Fix the mounting bug (swaping external and internal sd card) - Kernel/CWM
The Following 16 Users Say Thank You to chuandinh For This Useful Post: [ Click to Expand ]
 
hi1
Old
#3  
Member
Thanks Meter 4
Posts: 98
Join Date: Jan 2011
Default Could you make an app?

It would be easy to make some $.
The Following User Says Thank You to hi1 For This Useful Post: [ Click to Expand ]
 
chuandinh
Old
#4  
Senior Member - OP
Thanks Meter 405
Posts: 264
Join Date: Sep 2008
Not right now, this requires some kernel modification which is not easy to do in an application. The app may help to flash the rom on SD card faster and easier, but can't change the kernel itself.

Quote:
Originally Posted by hi1 View Post
It would be easy to make some $.
 
Rulinglionadi
Old
#5  
Rulinglionadi's Avatar
Senior Member
Thanks Meter 217
Posts: 725
Join Date: Mar 2012
Location: INDIA
Good luck for this project

Will try it out sometime...




How to Root the Galaxy Note N7000 (EASIEST METHOD) Click here : http://youtu.be/ehXcnqntsro


Reset Flash/Binary Counter for ICS Galaxy S3/S2/Note I9100 I9220 I9300 N7000 Click here : http://youtu.be/Aa-t-8ypcYs
 
kopitalk
Old
#6  
Senior Member
Thanks Meter 173
Posts: 519
Join Date: Feb 2012
Nice concept.. I always want to have dual boot for Samsung and AOSP/CM based ROM... But now, wait until we see a one-for-all kernel like siyah to be developed for our Notes..
 
prabhu1980
Old
#7  
prabhu1980's Avatar
Senior Member
Thanks Meter 111
Posts: 255
Join Date: Dec 2009
Location: Indore
Wow ! Waiting for such a thing !
Will install it and see ....
 
hara74
Old
(Last edited by hara74; 3rd July 2012 at 09:06 AM.)
#8  
hara74's Avatar
Senior Member
Thanks Meter 602
Posts: 1,334
Join Date: Feb 2012
Location: Herrstein
How can I delete the Rom on SD again, if I donīt want it anymore?

And to be sure the SD means the external SD.

thanks for answer

Edit: sorry to say, but ur links are 404 Error, canīt download anything
Biftor™SlimKat Rom V6.0 - HATOs Green Dragon
Modem: XXLT4
Kernel:


HATO-Themes
haraīs Batterie Icons


to hit the Thanks Button is not a shame
 
chuandinh
Old
#9  
Senior Member - OP
Thanks Meter 405
Posts: 264
Join Date: Sep 2008
Just delete the SDRoms folder on your internal SD card. SD means internal SD. You can move it to external SD by changing the bootsdrom.cfg values.

Quote:
Originally Posted by hara74 View Post
How can I delete the Rom on SD again, if I donīt want it anymore?

And to be sure the SD means the external SD.

thanks for answer

Edit: sorry to say, but ur links are 404 Error, canīt download anything


Sent from my GT-N7000 using Tapatalk 2
The Following User Says Thank You to chuandinh For This Useful Post: [ Click to Expand ]
 
mbudh
Old
#10  
mbudh's Avatar
Senior Member
Thanks Meter 38
Posts: 149
Join Date: Nov 2006
Location: Ciputat
Quote:
Originally Posted by chuandinh View Post
Just delete the SDRoms folder on your internal SD card. SD means internal SD. You can move it to external SD by changing the bootsdrom.cfg values.
With changing that value, is it possible to get triple boot?

I imagine to have:
- CM/AOKP in the main ROM
- custom ROM based on TW on internal SD
- official ROM on external SD.

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes