KT747 Jellybean kernel features
•Must have a AT&T, TMO, Bell, Rogers or Telus Samsung ROM to use the Sammy Kernel
•Must have a AT&T, TMO, Bell, Rogers or Telus AOSP ROM to use the AOSP Kernel
•Must have custom recovery installed: (Here is one suggestion: http://www.epiccm.org/2012/06/team-e...-recovery.html)
•Linux kernel 3.0.69 + 3.4.48
•Samsung open source
•Optimized kernel configuration
•Updated USB driver
•Updated wifi driver
•custom bootanimation
•unsecure root adb
•init.d support
•Governors (MSM-DCVS, ABYSSPLUG, BADASS, SUPERBAD,LAGFREE, SLEEPY, SCARY, SMARTASSV2, WHEATLEY, LAZY, ADAPTIVE, INTERACTIVE, PEGASUSQ, LULZACTIVE, KTOONSERVATIVE, CONSERVATIVE, ONDEMAND, USERSPACE, PERFORMANCE)
•Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE)
•Voltage interface
•CPU Overclocking
•CPU Underclocking
•Boots on stock table (USE KTweaker app to enable OC steps all the way to 2106mhz)
•Fastcharging for USB/Car Charger (you must be unplugged before turn fast charge on or off, also Fast Charge DISABLES USB connection to your PC)
•KTweaker app for kernel control
•KTweaker Widget
***** IMPORTANT *****
If you are using my ktoonservative governor with the Touchwiz JELLYBEAN version, you should rename /system/bin/qosmgr to /system/bin/qosmgr.bak to prevent battery drain
Always do the following AFTER installing the kernel:
1. Clear cache
2. Clear dalvik
3. Fix Permissions
If you like my work, donate with this link: http://forum.xda-developers.com/dona....php?u=4325945
_____________________________
Do NOT flash my kernels if you are allergic to AWESOME!!!!!!!!!!!!!!!
_____________________________
Change Log 6.8.2013
1. Linux 3.4.48
2. Bluetooth patch from CM for people that cant get bluetooth to work
3. Updated wifi driver to version 1.61.47 from the GT-9505 source
4. Changed Trinity Colors to use CM's interface witht the 5 options. Still need to cycle screen off then on to take effect.
5. KTweaker: Trinity colors 5 options
6. KTweaker: TCP Options under "Extras" screen to tweak wifi driver. Experiment on your own to find best results
Change Log 5.17.2013
1. Couple little Linux patches
2. Fixed Bluetooth issue, where certain people could NOT connect to there device
3. Thats it..........
Change Log 5.14.2013
1. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.296 from codeaurora.org
2. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.298 from codeaurora.org
3. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.301 from codeaurora.org
4. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.306 from codeaurora.org
5. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.308 from codeaurora.org
6. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.309 from codeaurora.org
7. Linux 3.4.45
8. A few patches to get completely sync'd with CM
Change Log 5.9.2013
1. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.295 from codeaurora.org
2. ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6
3. Revert "ASoC: msm: Support independent left-right channel volume cont
4. Revert "arm: mm: Add VM_ARM_EMPTY_MAPPING flag to mark the PMD gaps
5. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.292 from codeaurora.org
6. Couple patches for schedulers main code
7. Raise MDP bandwidth requirements (this should get rid of the screen flicker that some were getting)
8. Compiled with latest Linaro
9. Linux 3.4.44
10. Completely sync'd with CM
Change Log 5.5.2013
1. JB_2.5.04.02.02.040.288 from codeaurora.org
2. Couple of USB patches
3. Couple of display driver updates
4. Totally sync'd with CM
Change Log 5/3/2013
1. Added GPS Scheduler and Governor option in "Extras" screen for TW USERS (used to automatically change sched and gov when GPS is IN USE
2. Patches from CM and google
3. Revert "msm_fb: display: allow backlight update after first update"
4. Linux 3.4.43
5. ARM: fault: assume no context when IRQs are disabled during data abort.
6. lowmemorykiller: make default lowmemorykiller debug message useful
7. Updated FAUX Sound
8. Renamed zip files a little to be shorter and easier to read
Change Log 4/30/2013
1. Added GPS Scheduler and Governor option in "Extras" screen
2. A few patches from CM from last night and today
3. A few patches from codeaurora
Change Log 4.29.2013 MD4 update that includes:
1. Camera
2. Display drivers for UI
3. Memory functions
4. Wireless
5. USB
6. Video drivers for video playback
7. mmc/block/ssd
8. Sound drivers
Change Log 4.27.2013
1. BRAND NEW BOOT SPLASH IMAGE THANKS TO TASK650
2. Linux 3.4.42
3. A few updates from CM so its up to date
4. Fixed issue with KTweaker not setting lower temps on KThermal screen
5. Fixed asswax thanks for implementation DecimalMan
6. Fixed smartassH3
7. Thats about it.........
Change Log 4.19.2013
1. Linux 3.4.40
2. Linux 3.4.41
3. ROW scheduler updates
4. Update to date with CM and code aurora
5. Lots of Linux patches for SMP and some optimizations
6. More but no time........
Change Log 4.11.2013
1. Optimizations for ROW scheduler
2. Optimizations for CFQ scheduler
3. Optimizations for DEADLINE scheduler
4. Some backgound scheduler optimizations and entropy stuff
5. Merge in codeaurora JB_2.5.04.02.02.40.236
6. Fix composition issues when framework rebooted in suspend
7. REVERT regulator fix up that was causing high power drain and instability
8. Merge in codeaurora JB_2.5.04.02.02.40.242
9. 100% synced with CM
Change Log 3.27.2013
1. ICS is NOW removed from build
2. Linux 3.4.37
3. Brand new KTweaker, new look and feel YOU MUST FORCE STOP AND CLEAR DATA FOR KTWEAKER, SEE FULL INSTRUCTIONS BELOW. DO NOT RESTORE ANY OLD BACKUP FILES!!!!!!!!!!!
4. Auto-hotplug from thalamus modded to work with KT747, you can check this box in "General" screen to enable hotplugging for governors that dont do it there own.
5. Fix up freq tables math errors from cobraboy85
6. New steps in lower range, they are now 81, 135, 189, 378 instead of 96, 144, 196, 384
7. Toggle for Trinity colors from Morfic. Its under "Extras", when you change the option, you must turn screen off and on once to take effect
8. Added restore Stock Voltage Table to "Voltage" screen
9. Many other patches and tweaks I cant remember, lol....
ENJOY
WIPE INSTRUCTIONS
1. Go to the normal place to "Clear Data" and click "Force Stop" 1ST(usually on "Settings-> Apps")
2. Click "Clear Data"
3. Boot to recovery and flash
4. When u open KTweaker for the first time it should NOT ask you any questions, if it does, go back to step #1
Change Log 3.14.2013
1. Added sampling_rate_screen_off variable to ktoonservative to control sampling rate while screen is OFF. Im using 90,000 for this new tunable.
2. cpufreq: intellidemand: stop crash when changing sampling_rate
3. Sound Control: Sound control from Faux for all versions
4. Patches from faux on his Sound Control
5. Couple adreno (GPU) updates from CM
6. Added asswax governor: LOL
7. Linux 3.0.69
8. Battery level Mhz control: Added battery_ctrl_disable_chrg option to disable battery control while plugged in and charging
9. Remove some debug that is spamming dmesg
10. Ktoonservative: Add ability to disable hotplugging while connected to bluetooth (ONLY WORKING ON TW, HAVING ISSUES ON AOSP).
Change Log 3.6.2013
1. Touchwiz 4.1 ONLY update
2. Remove power button from boost buttons (all other buttons are still active)
3. Fix issue with setting "read_idle" in row scheduler
4. UKSM memory management (If you want to read up on it, check this out: http://www.phoronix.com/scan.php?pag...tem&px=MTEzMTI)
Change Log 3.5.2013
1. Linux 3.0.67
2. Linux 3.0.68
3. Updates from CM
4. Pulled in some MA6 updates from Sprint official JB 4.1.2
5. Added FIFO scheduler for all versions
6. ktoonservative: Ignore disable_hotpluging while screen is off
7. Fix bug in Battery level Mhz control when only low or only high is set
8. ktoonservative: Add boost_2nd_core_on_button that turns on 2nd core on power button, back button, home button and menu button
9. Hold 2nd core on for 1 second when boost 2nd options are being used
Change Log 2.19.2013
1. Linux 3.0.63
2. Linux 3.0.64
3. Linux 3.0.65
4. frandom added to JB versions
5. Trinity/morfic colors
6. Several Linux fixes/patches/updates
7. Added Screen OFF scheduler profile
8. New version of KTweaker (Version 2.4)
9. Added battery level MAX MHZ setting to ktoonservative
10. Updated ramdisk to 4.2.2 standards for AOSP
11. Added ASIX network support
Change Log 2.8.2013
1. WIFI TETHERING IS BACK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2. acpuclock-8960: Change HFPLL_NOMINAL_VDD to 700 to allow more than 125mV UVage for steps higher than 1080 MHz
Change Log 2.7.2013
1. Linux 3.0.61
2. Linux 3.0.62
3. Updates to ROW scheduler
5. Sync with CM patches
6. Updates to ktoonservative. 3 new tunables.
7. ktoonservative: boost_turn_on_2nd_core: a 1 turns on 2nd core on touch, 0 does not
8. ktoonservative: no_2nd_cpu_screen_off: a 1 enusres 2nd core stays off while screen is off, 0 does not
9. ktoonservative: disable_hotpluging: a 1 keeps 2nd core on FULL time, 0 keeps hotplugging normal.
10. Add ASIX LAN Support
11. Couple of wireless: bcmdhd updates
12. Upgrade to Linaro 4.7-2013.01-1-2013
13. Update to old conservative gov.
Change Log 1.26.2013
1. Linux 3.0.58
2. Linux 3.0.59
3. Linux 3.0.60
4. Updates to ROW scheduler
5. Lots of updates from CM (with CM ROM updates lag should be gone after exiting games
6. Couple updates to ktoonservative to help battery and speed things up
Change Log 1.9
1. Built with newest Linaro compiler so its EVEN FASTER (about 25 billion times faster)
2. Added Row scheduler to all other versions
3. Added Zen scheduler to all other versions
4. CM patches for AOSP guys
5. Thats all I can remember
Change Log 1.8.2013
1. Added Yoyo mode to ktoonservative (mimics the test from 1/5) and is DISABLED by default
2. To enable yoyo mode, set "use_yoyo_cpuload" to a 1, I recommend setting "cpu_down_block_cycles" to a 22 or 44.
3. You can enable yoyo if you feel ktoonservative is lagy since moving to 4.2. It does jump around the Mhz range and hotplugs the 2nd cpu alot more than normal mode but is very responsive!.
Change Log 12.29
1. Fully synced with CM 10.1 code
2. Data is BACK on CM 10.1!!!!!!!!!!!!!!!!!!!!!!!
3. Fix some issues with smartassV2
4. BFQ v5r1
5. Newest KTweaker 2.3 included
6. Video is working
7. Im sick as hell with the flu so thats the end...
Change Log 12.20
1. Linux 3.0.57
2. Improve modem stability across all D2 devices from CM
3. Couple of Linux updates
Change Log 12.11
1. Linux 3.0.52
2. Linux 3.0.53
3. Linux 3.0.54
4. Linux 3.0.55
5. Linux 3.0.56
6. Tweaks to lulzactive
7. Quite down the vibration driver which speeds up typing and capacitive buttons
8. Changes to Bluetooth Mhz setting logic (its nearly perfect now, only issue where it might revert is ending a call)
9. More TCP filter code from madmack
10. Merged in TMO and ATT official TW-JB code
11. Black screen code from the test kernel is in here to reduce black screen wake issue
12. Thats all I can think of and ENJOY!....
Change Log 11.13
1. Linux 3.0.50
2. Linux 3.0.51
3. Ktoonservative tweaks and added tunable "down_threshold_hotplug" for more control.
4. Screen OFF profile for Mhz will be ignored while on the phone now, since it was causing some lag when triggering prox sensor
5. Sync with CM10 display code updates
6. Sync with CM ramdisk changes
7. Tethering is back but kept some LJ7 stuff plus block some TCP multicast crap to save battery
8. Fix issue with Bluetooth Minimum Mhz profile while screen was off (should be working now)
9. Fixed issues with governor applying when not needed during screen ON/OFF
10. OFF TO OAKLAND NOW!!!!!
Change Log 10.31
1. Linux 3.0.49
2. Intellidemand Governor
3. SLP Governor
4. Many fixes for KTweaker
5. Updated wifi driver to LJ7 for AOSP JB kernel
6. Some other stuff I cant remember, got a plane to catch early tomorrow...
Changelog 10.28
1. Linux 3.0.47
2. Linux 3.0.48
3. Fixed screen off profile issue
4. Added Screen OFF Profile governor selection
5. Added Bluetooth Profile Connection Minimum Mhz
6. Modified Swipe2wake to be 3 selections (OFF, On always, On when plugged in). KT-Widget will show S2WP with a check mark when Plugged in option is selected.
7. Something else I cant remember
8. The Touchwiz jellybean version here is the same as the one I released yesterday.
Change Log 10.14 thru 10.22
1. Linux 3.0.45
2. Linux 3.0.46
3. New Wheatley Governor
4. New Sleepy Governor
5. Swipe2Wake (this option DOES hold a wakelock so I would only use it while plugged in, it eats about 3-4% per hour on battery)
6. Added Swipe2Wake checkbox on KT-Widget
7. -O3 and other compiler optimization flags from the super crazy fast editions
8. Made from real panther, so u know its good
9. Super optimized SQL driver (300% faster on database access, you will see bit speed gains in MMS and Settings apps)
10. Some other stuff I can remember
Change Log 10.9
1. Linux 3.0.44
2. Linux 3.0.45
3. Some usb patches
4. UHS SD3.0 patches
5. Compiled with Linaro 4.7 September
6. More error checking in KTweaker and KT-Widget
Change Log 10.3
1. CM10 sync
2. Added KTweaker option to name your backup and restore with a list of ones you created
3. Added KTweaker Widget (Widgets name is KTweakerW in you widget list)
4. Added KTweaker option to disable Toast messages
5. Updated wifi driver, increases speed and may help the people that were having connectivity issues
6. Added KTweaker option to adjust Scheduler Options
Change Log 9.23
1. Synced up with all CM10 commits
2. Added way to disable Touch Booster (its under First Touch Booster to disable both) (Doesnt work for ondemand for AOSP version since CM has there own version of Touch Booster)
3. Added Yes/No question to Backup option
4. Several Linux Commits and reverts to help stability
5. A few patches that seem to have fixed the flash AOSP and my kernel together in the same recovery session. Give it a try
6. Changed Screen off Mhz to match rest of the app without extra Zeros It is recommended to wipe app data for KTweaker before flashing this kernel since a few options got resized and text is different in Sccreen Off
Change log 9.18
1. Added CM10/AOKP CRT patch
2. Linux 3.0.43
3. Lots of patches for speed and battery
4. Updated KTweaker (trying to make it ask the Min/Max question less)
5. Many, many more..........
Change Log 9.13
1. Added vibration interface, its under Extras in KTweaker
2. GPU OC
3. A ton of Linux patches
4. Some more CM patches
5. There is a lot of improvement in speed and stability here.....
Change Log 9/10
1. Added "Fast Charge" (It has been recommend to only use it for DC charging and not for USB but can be used for USB but in VERY rare cases can cause damage to your USB port) 2. Brand new code to try and keep OCing locked and not revert
3. Updates to ondemand and pegasusq gov
4. Lots of CM10 commits
5. Linux patches.....
Change Log 9-5
1. Reverted some memory management stuff to see if I can kill the super lag
2. KTweaker, changed boot option to lots of choices for delaying the set on boot (If you have issues with the update to the app, clear data, I tried my best to update the settings based on old data)
3. CM10 sync for AOSP-JB guys
4. A few other I dont remember
Change Log 8-31
1. CM10 pathces for AOSP kernels
2. Added +-25 and +-5 volts in Voltage Screen in KTweaker (press menu button to use them)
3. Tweaks to ktoonservative governor
4. Memory management fixes
5. MSM patches
6. A whole bunch of stuff .......
Change Log 8-30
1. Reverted compiler and changed opto flags
2. Updated KTweaker, Screen off Profile Mhz setting is working now.
3. Updated KTweaker, boot setting should apply now, added 5 second delay.
4. CM update for the Jellybean kernel
5. Ktoonservative Governor
6. Many, many more.....
Change Log 8-27
1. Jellybean only update
2. Compiled with newer version of Linaro so it is 100,000,000,000,000 times faster
3. Updated KTweaker, added Screen off Profile Mhz setting, backup settings to sdcard, restore setting from sdcard, Governor Adjustments Screen. 4. Lots of audio patches from the CM guys
5. etc...........
Change Log 8.24
1. Boot on stock table 2. KTweaker app included in flash
3. Overclock to 2106mhz
4. Underclock to 96mhz
5. 8,000,000 changes, too long to list
Change Log 8.15
1. Updated to latest patches from CM team
2. Linux 3.0.41
3. Lots of tweaks to the Normal and OC'd mhz ranges
4. Upped bus frequencys on a few steps for better performance
5. Lowered minimum voltage to 700
6. Upped maximum voltage to 1400
7. Added govs: abyssplug, badass, lagfree, scary, superbad
8. Removed GPU OC since it was slowing down the phone
9. So much other underwear..........
Change Log 8.11
1. Linux 3.0.40
2. GPU overclock interface
3. arm/crypto: Add optimized AES and SHA1 routines
4. block/deadline: tweaked for better performance on android
5. sched: task_times() explosion avoidance for tasks with > 2^32 acrued
6. Various msm: iommu patches
7. arm: Don't disable interrupts during WFE fixup
8. etc............
Change Log 8.10
1. Fix camera issue from lockscreen
2. Re-enabled DVFS
3. patch camera to stop reboots
Change Log 8.9
1. All CM10 code merged in including
2. msm:video upgrades
3. gpu: ion
4. usb tweaks
5. Tweaked pegasusq gov from Gokhan
6. and a million more......
Change Log 8.3
1. Major update merging in LG8 code from CM
2. bcmdhd 1.15.15
3. arm: show present cpu instead of online cpu in /proc/cpuinfo
Change Log 8-1
1. Linux 3.0.39
2. sched/nohz cleanup
3. Enable FAIR_GROUP_SCHED
4. Video: msm tweaks (video should be much smoother)
5. USB: gadget: Fix crash in ci13xxx_udc.c
6. Fixes for capacitive buttons lights
7. Many many more......
Change Log 7-28
1. Fixed gyro sensor
2. msm: rotator: Add secure session flag to rotator start data
3. Added kexec support
4. d2att: Move ramconsole to lower memory
5. dhd wakelock helper
6. Fixed charge while phone powered down
7. Compiler opto's
Change Log 7-25
1. Added BFQ v3r4 scheduler
2. Added more wake_lock debug
3. Opto's for wake_lock routine
4. optimize checksum routines
5. net: wireless: bcmdhd: Reduce priority for dhd_dpc and watchdog
6. Battery and speed improvements
7. Countless others..........
Change Log 7-22
1. Made a change to see if Foreign phones will show 192mhz
2. Linux 3.0.38
3. Reduced logging from chatty drivers
4. Lots of iosched treaks
5. 50,000 lines of code merge in from my other kernels...
Change Log 7-21
1. Started from scratch rebasing from Jellybean source for both ICS & JB versions
2. Put voltages back to stock'ish, so people can undervolt on there own (to get back to what my older kernels were, remove 75mhz from all steps except 192mhz and the 4 OC steps.)
3. Added init.d script to get try to get those stuborn phone to set 1512 as default max.
4. JB version now has all my good stuff in it from previous versions FYI: CM10 does not want to cooperate with the max Mhz settings from my scripts, since it is a beta ROM, so you will have to set it manually with "Voltage Control" or run the script I put in "/system/etc/init.d/00post-init"
Change Log for 7/19c
•more tweaks to the the voltage interface
•added more stuff for cpufreq to try and keep the max freq to 1512
Change Log for 7/19b
•Added missing govs/scheds to AOSP version
•Made change for adb remount on Sammy version
•Change volt table to support SetCPU
Change Log for 7/19
•The long awaited Voltage Interface
•Underclock step at 192mhz
•Pegasusq tweeks
•smartass2:tweaking for responsiveness and battery life
•deadline-iosched.c: tweak deadline for flash devices
•arm: Allow CPU-supported unaligned accesses
•mm.h: increase readahead value from 128kb to 1024kb
•compiler optimizations
•sched: clock wrap bug in 2.6.35-stable kills scheduling
•sched/fair: Improve the ->group_imb logic
•mm, oom: fix potential killing of thread that is disabled from oom killing
•fifo: Do not restart open() if it already found a partner
•block: fix infinite loop in __getblk_slow
•cpufreq: Import latest cpufreq_interactive driver from Google
•wakelock: (tungstwenty's implementation) plus lots of other additions
•bcmdhd: Change packet filter settings to block multicast
Change Log for 7/18
•Linux 3.0.37
•MTP IS NOW WORKING (AOKP version)
•Lots of other patches from CM/AOKP
Change Log for 7/10/2012b
1. Set 1512mhz as default (you will 6-10 seconds of it in CPUSpy, this is only at pre-boot before init's set it back to 1512)
2. Couple more tweaks to UV
Change Log for 7/9/2012
•OC is back in and is default (1.9ghz) - Use SetCPU or Voltage Control to set back to 1512mhz as max if you dont want the OC
•Used setting from roman for some UV
•TOUCH_BOOSTER adjustments (this should save some battery on any governor except performance since it is static)
•other cpufreq mods
Change Log for 7/8/2012
•modified initramfs to get rid of battery drainer
•Rebased cpufreq
•Removed OC until I can get it set to stock on boot
Change Log for 7/7/2012b
•ondemand tweaks
•Added 3 steps for OC'ing (still some issues getting to actually reach the steps)
Change Log for 7/7/2012
•Made ondemand and noop defaults
•Some tweaks to ondemand for smoothing
•New Governors (PEGASUSQ, ADAPTIVE, SMARTASS2, LULZACTIVE)
•New Schedulers (CFQ, BFQ, VR)
•ADB remount support
If you like my work, donate with this link: http://forum.xda-developers.com/dona....php?u=4325945
_____________________________
Do NOT flash my kernels if you are allergic to AWESOME!!!!!!!!!!!!!!!
_____________________________
General Screen
governor = ktoonservative
scheduler = row
Voltage Screen
UV'd 25mv across the board (use menu button for hidden menu option to globally add/subtract)
Extras Screen
Screen OFF Profile Mhz = 486
Disable Screen Off Mhz Call = Checked
Screen OFF Profile Sched = noop
General -> Governor Adjustments Screen
boost_cpu = 1134
sampling_rate_screen_off = 90000
ALL THE REST ARE STOCK
__________________________________________________ ________________
ktoonservative Governor
This governor is based on conservative, but added some tunable vars and made it a hotplugging governor unlike conservative. With the settings I included stock it is probably the most responsive gov and is pretty good at saving battery as well. Especially with my screen off option to limit the CPU top Mhz. Hope that answers all ur questions.
If you like my work, donate with this link: http://forum.xda-developers.com/dona....php?u=4325945
_____________________________
Do NOT flash my kernels if you are allergic to AWESOME!!!!!!!!!!!!!!!
_____________________________
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Enjoy guys, it is definetely noticably faster than stock
If you like my work, donate with this link: http://forum.xda-developers.com/dona....php?u=4325945
_____________________________
Do NOT flash my kernels if you are allergic to AWESOME!!!!!!!!!!!!!!!
_____________________________
Wow.... amazing. Can't wait to install ktoonez. Straight from your kernel on my s2 to your kernel on the s3. How you like your s3 so far?
Sent from my SAMSUNG-SGH-I747 using xda premium
Lovin it, be much happier once I get AOKP going on it
If you like my work, donate with this link: http://forum.xda-developers.com/dona....php?u=4325945
_____________________________
Do NOT flash my kernels if you are allergic to AWESOME!!!!!!!!!!!!!!!
_____________________________
From HTML to LEDs or Android to Arduino, Hardware Hacking is a pastime of many people … more
XDA Developers was founded by developers, for developers. It is now a valuable resource for people who want to make the most of their mobile devices, from customizing the look and feel to adding new functionality. Are you a developer?
New: XDA launches forum for app developers. Discuss coding, tools, marketing, and more.
>
[KERNEL][AT&T][AOSP/Touchwiz][JELLYBEAN][6/8/2013] KT747 - MD4 - KTweaker
Print
Email
[KERNEL][AT&T][AOSP/Touchwiz][JELLYBEAN][6/8/2013] KT747 - MD4 - KTweaker
, thanks danesusername
View Profile
View Forum Posts
Follow on Twitter
Follow on Google+
View GitHub profile
View Facebook page
Subscribe
