Unoffical CM10 - Dell Streak 7 Alpha v1.1E

---

This thread is for the development progress of the Dell Streak 7 running Jelly Bean Android 4.1.2 using Cyanogenmod 10 as the basis.
It is now being moved up a version, from Alpha 0.4 to Alpha 1.0.

This reverts us to the ICS-B4 partition layout. The reason being is that Dell decieded to be different and it causes problems with the sdcard fuse daemon. But switching to this layout, it allowed the sdcard daemon to work correctly and give us more space.

Developers:
giveen - CM10 Port / Kernel Updates
geramy - Sound and other fixes.
DJ_Steve - Sound idea that worked.



Thanks:
Cyanogenmod team - for making the port actually pretty easy
geramy - for all your incredible help getting sound going.
snargledorf - basically rebuilding CM9 for the Dell Streak 7 , to which I was able to base my work off of.
DJ_Steve - for teaching me and all the tips and putting up with my annoying questions
My wife - giving me grace and putting up with the hours I put into this
(oops forgot a couple people)
_motley - for clues onto framebuffers and overlays failing, without him it would have never booted
Borkata - for help with wifi and other little hints.
pengus77 - for helping me fix wifi on CM10.1 (and invertly new changes on CM10 had the same problem)

https://github.com/giveen/android_device_dell_streak7


Alpha v1.1E
Working:
Boots!!!
Touchscreen
Hapatic feedback
External SD
Internal Storage (shows full space, can install apps to it, but you cannot store anything on it)
Power button
Brightness
Root
Capacitive buttons
Bluetooth (audio as well, so far the only way audio works)
WIFI
MTP to external SD
Sound

• Headphones - are a bit loud and volume control doesn't always work
• Speakers - is a bit quiet and sometimes takes a moment for it to adjust volumes

Not Working:
camera (what do you think I am...a miracle worker?)
GPS (turns on but doesn't lock on)
Sensors

What else doesn't work...I"m still checking it all out.




Recognized Donators:
azrael
Mohamad R. (let me know your screen name and I'll change this )
Robert Trier
Bradley F.

Fixed a bunch and it looks like surfaceflinger is segfaulting, will look at tomorrow morning

My errors

E/Netd ( 79): Unable to open quota2 logging socket

init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead

init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead

init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead

init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead

F/libc ( 81): Fatal signal 7 (SIGBUS) at 0x4102f1cc (code=2), thread 146 (SurfaceFlinger)

Cannot load library: link_image[1891]: 84 could not load needed library 'libaudio.so' for 'audio.primary.tegra.so' (reloc_library[1306]: 84 cannot locate


E/AudioFlinger( 84): int android::load_audio_interface(char const*, audio_hw_device_t**) couldn't load audio hw module audio.primary (Invalid argument)


I/DEBUG ( 80): pid: 81, tid: 146, name: SurfaceFlinger >>> /system/bin/surfaceflinger <<<

I/DEBUG ( 80): signal 7 (SIGBUS), code 2 (BUS_ADRERR), fault addr 4102f1cc


D/SensorService( 270): nuSensorService starting...

E/SensorService( 270): couldn't load sensors module (No such file or directory)


W/EntropyMixer( 270): Caused by: libcore.io.ErrnoException: open failed: ENOENT (No such file or directory)

Originally Posted by giveen

My errors

E/Netd ( 79): Unable to open quota2 logging socket

init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead

init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead

init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead

init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead

F/libc ( 81): Fatal signal 7 (SIGBUS) at 0x4102f1cc (code=2), thread 146 (SurfaceFlinger)

Cannot load library: link_image[1891]: 84 could not load needed library 'libaudio.so' for 'audio.primary.tegra.so' (reloc_library[1306]: 84 cannot locate


E/AudioFlinger( 84): int android::load_audio_interface(char const*, audio_hw_device_t**) couldn't load audio hw module audio.primary (Invalid argument)


I/DEBUG ( 80): pid: 81, tid: 146, name: SurfaceFlinger >>> /system/bin/surfaceflinger <<<

I/DEBUG ( 80): signal 7 (SIGBUS), code 2 (BUS_ADRERR), fault addr 4102f1cc


D/SensorService( 270): nuSensorService starting...

E/SensorService( 270): couldn't load sensors module (No such file or directory)


W/EntropyMixer( 270): Caused by: libcore.io.ErrnoException: open failed: ENOENT (No such file or directory)

attach your init.rc, init.goldfish.rc and init.streak7.rc files, I guess 2 people looking over this could provide more help than just one

See your PM's

Are you guys "teasing" all us Streak 7 owners with this Jelly Bean Rom thread?

---

ICS just dropped and Jelly Bean...?

What is the difference and is Jelly Bean going to be a easier build if so?
I thought Jelly Bean was just ascetic changes, not a revamp.

Please tell me you are really developing the rom cause I was about to gift it to a friend but now im holding off.... I would hate to indian give it....

Jb has better performance just like every new version of Android. Also a bunch if new features

Do you have an estimated time of when you want to complete this or is it as ling as it takes?

Originally Posted by ashyk36

Do you have an estimated time of when you want to complete this or is it as ling as it takes?

Don't ask for ETA's.. just be patient and wait like everyone else, we don't provide ETA's as we could have errors or other variables that could influence the completion of roms (from server going down to zombie apocalypse)

Who has Jelly Bean on the Dell Streak 7 booting right now....yeah this guy does.