CM10.1 - 5/9/2013 - New CM build is up with the new partition layout. DO NOT
proceed without reading this first. You may want to remove your external sdcard as there have been a few reports in the past that it messed things up. Safety first! When you go to flash it, it will give you a warning about being incompatible and it will erase your data... You will need to flash it again for it to start to flash. It will reboot and go back into flashing.... It will reboot again and come back to normal recovery screen. From this point, the build is finished installing and you can install GAPPs or any extras you may want to use. DO NOT
, i repeat DO NOT
under any circumstance flash the old BLNnTouchwake packages until i update them... You will be completely F'ed
.... Need i say more? - 5/12/2013 - BLN packages updated. Please use links above.
Enjoy the new partition layout and remember to thank araemo for figuring out what was needed to use the new partition setup for our device.
Latest CM sources have been merged and overlay has been added to our device tree to finally fix dock audio. It now works and routes correctly.
CM10.1 - 5/4/2013 - Id highly suggest a full wipe/format when flashing the new build. There have been a bunch of kernel changes and board changes on the device end. Failure to wipe could result in ****ty underwear and a ****ty experience. Optimized the kernel as much as possible with our current setup. Also merged latest CM sources.
CM10.1 - 3/30/2013 - Browser issue from the 3/28 build is fixed.
CM10.1 - 3/28/2013 - Status/notification freezing issue finally resolved! Another source update and changes on the device/kernel end to keep up with changed source.
CM10.1 - 3/24/2013 - Another source update and changes on the device/kernel end to keep up with changed source.
CM10.1 - 3/16/2013 - Another source update and changes on the device/kernel end to keep up with changed source.
CM10.1 - 3/2/2013 - Nothing major, just a 'keep up to date' build. Alot of minor fixes and cleanups on the CM source side.
CM10.1 - 2/15 - Android 4.2.2 has been stuffed into cm10.1! Not going to list the android source changes, look them up on your own. As for the build, I removed the p2p code as it wasnt working as it shouldve been anyways (actually should have done this awhile back). Removed the overlay for notification light settings since we dont have them. used the default audio policy from the cm build instead of the device specific one we were using. Few other things i dont recall at this time. Merged latest CM source code.
CM10.1 - 2/3 - New build is up. Couple minor changes in the device tree, but nothing worth noting. Mostly CM source update.
CM10.1 - 1/14 - New build is up. Sorry for the delay. Couple minor kernel changes and a minor bluetooth change device side. Other then that, this is mainly just a build to keep up to date with CM source code since its been awhile.
CM10.1 - 12/29 - Freed up more RAM!! We are now up to 501 MB of free RAM. Not sure there is anything else left that we can squeeze RAM out of. If you remember correctly, with ICS and early jellybean builds, we had 444 MB of RAM or somewhere around there... So in total, jut under 60 MB of RAM has been freed since the jellybean builds have started. I did some very minor cleanup on the device side (nothing major as our device repo is right where it needs to be). I also cherry-picked a couple options to add the rocket launcher option back into the mix. You can use this by going to settings -> display -> day dream -> rocket launcher. Just a neat little thing that i decided to add. Also added a commit from JT that adds slight transparency to the status bar notification background. Other then that, just alot of CM source merges. Check it out!
CM10.1 - 12/19 - Pretty much a must have as far as im concerned if your running cm10.1, you want to update to this build. I have added the latest linaro tool chain to the kernel and built it with linaro. For those of you that are not aware of linaro, please do some searching before posting about it. This is the first time ive built the kernel with a linaro tool chain, but have heard good things so figured we would give it a shot. Updated the kernel compression files which should improve boot time. I also went and disabled the tvout and mhl files from building into the kernel. I cant prove that it was hurting anything having them included, but it seemed that every kmsg had lines in it referring to tvout issues, so i figured id disable it since it should have been disabled a long time ago since we do not have working MHL and tvout at this point... and probably not any time soon. Reverted a couple changes that i think may have been causing minor issues for us which should prove to make things even more solid. Not much was done on the device side of our repo this update. The important things are the changes i have mentioned to the kernel and also merged the latest CM source code, which is always a good thing since they are still adding code at an impressive rate.
CM10.1 - 12/16 - This update should fix issues with Bluetooth. The only changes in this build are for bluetooth and also merged latest CM source since last night. Im 99% sure that BT is now fixed..
CM10.1 - 12/15 - This is a big update, you definitely want to update to this one. Both wifi and wifi tethering have been fixed. Wifi sleep disconnect issue should be better now thanks to code from pawtip without any of the negative side effects. Wifi tethering has been fixed thanks to entropy forwarding the legacy wifi tether code, seems to be working as it should. The bluetooth button from the settings menu is working again and seems to be fine. Alot of new code has been merged in the CM side of things. They have some new things that they added as well as things ported from the original CM10. There is also a new gapps package available, but i had to modify it as the gapps were outdated and causing issues. I updated the gapps and uploaded the 12-12 package on my goo found at http://www.goo.im/devs/scotthartbti/gapps
CM10.1 - 12/11 - Will update tomorrow. Link is up.
CM10.1 - 4.2.1 - 12/2 - enabled/merged source for samsung stk. Made another change to GPS and it should be all set. Added overlay to our device source files to modify the clock dpi settings so that it fits correctly from the lock screen. Couple of changes to wireless on the kernel side of things to adjust for the way 4.2.1 is setup. Wireless should be working perfectly at this point. Specified a limit of 5 user profiles and CM source has it setup that you can add the user profile switching to the power menu for quick switching. Re-enabled expanded desktop mode. Alot of other CM source code changes have been pushed out and continue to be pushed out. All and all, 4.2.1 is coming together incredibly smooth. Please use the GAPPs package i have on my goo account located at http://goo.im/devs/scotthartbti/gapps
. It is the 11-29 package and does not give me any issues. I modified the package so that the text swipe is now working correctly and the web browswer does not force close. Please make sure you do a full wipe and wipe dalvik and FORMAT /SYSTEM before flashing this new build and the modified 11-29 GAPPs package.
***Note, if you use a different GAPPs package then the one i suggest and have any issues, do not post about it.***
CM10 - 4.2.1 - 11/29 - Performance options are hidden by default with the developer options (cm change, dont blame me). To get them back, just simply tap the build number in the about phone section numerous times until you see a message saying you are a developer. USB is fully functional and even better... so is USB tethering. Wifi seems to be working pretty good and i have not noticed any drops since a change that was made on the kernel side. Live wallpapers are working fine also. Now... on to GPS... I do have it working, but its not 100 percent yet. This is the deal. If you try to use GPS and it does not work within a minute or two, you need to toggle wifi on and off. Dont ask me why, but that is what is causing it. When you do that, reload maps or gps test (whichever you are using) and you should be good. If not, repeat the previous steps. Ill still look into this and im sure it will be better soon, but for now, its atleast functional. Re-enabled zram and it seems to be working fine. Also merged latest CM source code which includes numerous forward ports from the original cm10 to work with 4.2.1. Overall, 4.2.1 is coming together pretty nice.
CM10 - 11/18 - For those of you that were reporting issues from the previous build, this is an update for you. Download and Flash this Kernel
. I reverted some of the minor changes that more then likely caused the trouble. I have no idea why some of you were having horrible problems and why some of you were not, but i guess that pretty much indicates how horribly F'ed our kernel is and that the smallest freaking change causes havoc for some users. Going forward, im not even touching the kernel or looking into changing anything kernel wise unless its a standard cm change for ALL samsung kernels.
Anyways... download from above, reboot into recovery, wipe cache, wipe dalvik cache, flash kernel fix, reboot.
CM10 - 11/4 - First and foremost... Fixed my mistake that took away the 8mp option for camera... That is now back (thanks to everyone that pointed it out). Next... OC kernel has been migrated into main kernel. That means no more separete OC kernel. Just one kernel with 1400 and 1600 mhz steps. Now... With this option added, Please use caution using those levels and use common sense. If the phone reboots or you have any issue at 1600 and think that something is wrong with the build, please change frequency back down to stock 1200 and if it stops, then obviously oc isnt working good for you. DO NOT REPORT IT as a bug in the build! JT added an option into the cm source files that allows us to set long press actions from the lock screen. Its pretty neat... You can specify values such as flashlight control and media controls from the capacitive keys and to activate, just long press whichever button you set. That option can be found in settings - lockscreen. I optimized more of the kernel values (again) and gave us an extra 13 MB of RAM. I updated wifi drivers again. There have been a small number of reports that when the phone goes into deep sleep and then they wake, wifi does not reconnect. Im not sure if the wifi update fixed that or not, but if you happen to be one of the few that experience this issue, just download and use wifi fixer. I tested it with no issues or complaints. Updated kernel compression/decompression files. Added encryptable footer (fixes cryptofs errors in logcat). Enabled expandable desktop option. Few kernel changes/optimizations here and there. Removed CMupdate app since we are not an official device. CM created and included their file manager into the build package. Merged latest CM source code.
CM10 - 10/28 - Just updated the stock CM kernel to have the option of 1400mhz. You can download Kernel From Here.
This is just as stable as original stock kernel, even when using the 1400mhz OC frequency. Now, Since the stock kernel is going to include the stable 1400mhz level, that means i am going to discontinue the separate OC kernel i have been releasing. I made one more change to the OC kernel and put together a final release. Download CM OC Kernel V8.1 the final release from here
CM10 - 10/27 - This is pretty much a maintenance build here. Reverted one or two questionable changes to ensure stability. Added a few changes on the kernel side to make dvfs code more efficient, fixes for wifi (only a couple minor ones.), update touchscreen driver, update kvm code to handle pages more efficiently. Corrected the camera preview/picture sizes (they seemed to be off before). Removed unused/unsupported code on device side. Added overlay config for the home key to unlock device feature to work correctly and the option is found from settings - lock screen - screen security - home unlock. Fixed up the lines needed for goo manager updates, I messed them up before (so OTA probably wont work until I release next build). Other then that, I merged in latest CM source code as always. Like i said... minor things, but a solid update nonetheless. FYI.. I was unable to get interactive boost working. I am still looking into it and hopefully by next build we will have boosting for our interactive governor as well as ondemand.
CM10 - 10/22 - Changes for this build: dock audio is now working thanks to the work of araemo. You can enable dock audio by going to setting - advanced - dock. pulled in wifi drivers from siyah kernel which should update our drivers a bit. Disabled ipv6 as it was causing havoc on our WiFi activity and caused hanging at times. It was also causing the delayed lock times with GPS. With this disabled, GPS is as good as it ever was if not better. This is a temporary work around until we can get ip6 support squared away. For now, sending a code to disable on start up will suffice. Fixed our calibration driver as it wasn't pulling the correct file at start up. CM fixed up our power hal and it now recognizes when we change governors... which means no more annoying log cat errors from power hal and also re enables boost pulse if you choose on demand governor again. Pulled a couple minor fixes for ksm code on the kernel side. Included goo manager and added the necessary lines to build prop to allow ota updates going forward. Please ignore the version I have specified... its just a way for setting up future updates. Found an issue with our audio drivers that would very very rarely cause a crash. Basically audio was not allowing suspend and in turn caused a crash. Pulled in latest cm source code.
CM10 - 10/15 - This build is mainly little bug fixes and missed things from the 4.1.2 source merge, but there are some key things from our device end that make it worth downloading. I optimized our kernel code a bit and freed up about 35 - 40 mb of RAM without sacrificing anything at all. I added a patch from Humberto to automatically enable the zram function after you select the value you want and reboot (this means no more manually having to run the script, reboot and your good to go.). Added option to allow changing ISO modes for camera (thanks to JT for that one). I've added 'lazy' governor by Ezeekel. Lazy governor is basically a modified ondemand governor and it seems to be pretty efficient. I have enabled installation of unknown apps by default (was tired of having to enable it everytime id restore from titanium)... I know there are a few other small things im missing, merged latest CM source.... Which includes a new addition to the battery styles that you can pick from. Please dont forget to update your GAPPs from the link above!
CM10 - 10/10 - Android 4.1.2 is here and ready to go on the infuse! Please search for Android OS changes from 4.1.1 to 4.1.2 as im not going to list every single change they have made. I have fixed up the power HAL this build, should be fully functional now (Thanks araemo). Added zRam, which is enabled/disabled from settings - performance. Slight clean up in device tree. Made a change that should improve GPS lock time. Everyone that i had test it reported improvements.... remember, it may still take a minute or two for the initial lock, but after that it should be good to go, atleast it was for myself and the people who tested. Merged latest CM source code. *** Previous GAPPs will work, no need to go searching for newer GAPPs.****
CM10 - 10/5 - New partition layout to increase /system to 400mb to avoid any possible space issues. We previously had 350mb and we were cutting it very close! Added power HAL for our device and also added pulse boosting to the ondemand governor... Its pretty nice. Few minor fixes here and there. Cleanup, bugs fixed. Merged latest CM source code. - PLEASE READ THIS BEFORE DOWNLOADING AND FLASHING!!!!: I had people test the following install and they left their external SD cards in the phone and had no issues, but if you do have an issue, remove external sdcard and try again. This latest build has been repartitioned so that /system is larger. system was previously 350mb and we were running out of space, so in order to avoid space issues, /system has been increased to 400mb. Now, since the partitions have changed, that means that they are going to wiped out and setup again when you flash the zip. This is going to cause the same behavior as the initial bml to mtd conversion flash. If you are on the previous MTD partitions, When you first flash, it will give you a warning message saying that your data will be erased in converting and you must flash again to and stop and you will see the dead android guy. This is just a warning message and is meant to be seen!!!. You will then need to flash again and this time it will start the conversion and then reboot into recovery and finish the conversion and then reboot into recovery again when it is finished. If you are on BML and converting to MTD for the first time, once you flash the package it will just start to install and reboot 2 times during the install process. When it comes back up the second time, you are finished and can proceed. You can then install GAPPs if needed or just boot up like normal. One last FYI... If you use an OC kernel, you need to use the newest one with the new partitions laid out or your gonna have some issue. Do NOT use old OC kernel on this new build.
CM10 - 9/26 - Fixed Battery drain issue from 9/23 build that was removed. Fixed data indicator issue. Added support for suspend mode in charging, merged latest source - USB Tethering is now working thanks to thebecoming! Reverted a couple changes that i believe was causing issues for a couple people on last build, you guys should be good now. Added smartassv2 and interactive governors. Tweaked Conservative governor (thanks entropy). Cherry picked a commit for promixity sensor settings from phone - settings. Various upgrades to kernel. Merged latest CM source code.
CM10 - 9/14 - Only a couple updates here, but ones that i thought were worthy of posting a new build. The MMS issue that some have reported should be completely fixed and shouldnt be an issue now. Also, we HAVE TORCH!!!! Thanks to araemo for finding the fix, we now have fully functional torch that is included in the package. I have removed the other flashlight app from the package as we do not need it now. Thanks again araemo! Fixed how the search key is referred to so you can set the hardware key options for it now and they will work. Also, as always... merged latest cm source. (coming shortly)
CM10 - 9/12 -- Same as previous few releases... Not much has changed in way of looks and thats pretty much going to be the case going forward as a majority of the cm source code has been merged.. Changes are mostly behind the scenes if you will.. In our device tree and the CM source code and kernel tree. Changed up the dalvik cache storage (seems alot better this way), merged alot of the aries-common changes that were missed (both stability advantageous and a performance tweak/tweaks as well), went through and added all the patches/fixes for usb i could since ICS which seems to have improved the small issue ive noticed which is lag while copying/pasting to or from the sdcard (Still not perfect, but were working with what we got). This build definitely seems to be the best yet as far as smoothness/stability goes, but ill let you guys be the judge... Give it a flash and let me know what you think.
CM10 - 8/31 - Data usage from the settings menu has been fixed and now appears where it should. Was not showing before due to a few kernel configs not being set. Cleaned up the device sensor code alot and should be improved. Merged latest CM code. Made a few kernel changes that should improve overall stability. Added overlay for a few apps such as MMS and Trebuchet to define values on boot. Included Flashlight HD LED which works perfectly for us. Turns on and off as it should (Thanks Rory!). Few other small things here and there. And last but not least... merged latest cm source code.
CM10 - 8/23 - Wifi tethering completely fixed - Thanks to entropy (you were right about it being true!)... GPS should be a hell of a lot better thanks to Dani... auto brightness set as default.. screen timeout 30 seconds ... cleaned up code in our device tree... boot animation is even smoother... ROM manager removed... removed alot of the junk files taking up space (mainly media)... Used the firmware files for wifi from entropy blob (seems to be better then before from what i can tell) plus latest cm source merged... bunch of other **** i cant remember... Everything overall seems much improved... id recommend downloading once i get it up.