Originally Posted by Dudebowski

how about an irc channel? I'll help testing and whatnot, so would be nice for more direct conversation.

#AOKP-DEV-GEN9

There are two channels for Archos and two channels for the g9 on Freenode. #archosg9-xda is the most active. See also #archos and #openpma.

This build should also work on sdcard models:

https://hotfile.com/dl/168399637/6c1....ext4.bz2.html

No other changes.

Originally Posted by nicktastique

Fixes for the HDD can be found in my git repos. I should have a filesystem image ready sometime tomorrow.

There's a local manifest in android_repo_local_manifest with sync and build instructions.

My device tree is forked from trevd's. If the 3g stuff worked with his, it should work with mine. (I have no modem to test with.)

Current changes:

• Fixed Settings -> Stroage crash.
• Fixed android.process.media crashes.
• Fixed MTP.
• Set the HDD spin-down timeout to 2 minutes at boot. Edit /system/etc/init.d/99hdd to change the timeout.
• Remove 'Recovery' and 'Bootloader' options from 'Reboot tablet' menu.
• Remove CM bits from the device tree in ics and ics-aokp branches.

Outstanding issues:

• Power off/Reboot sometimes sits forever in an infinite loop.
• The battery meter incorrectly shows a charging state when connected via USB to a computer.
• Touchscreen performance is still awful.

Untested on sdcard models as I don't own one.

---------- Post added at 04:23 PM ---------- Previous post was at 03:30 PM ----------

Here is a filesystem image which includes the HDD fixes: archos.ext4.bz2

The base image is surdu's beta3, but /system has been appended with my build.

I'd appreciate it if someone using an sdcard model could install it and tell me if anything breaks. Thanks in advance.

Crazy

---

I have a strange issue I hope someone can help me with it for the HDD 250 9g. I had swapped out my hdd for a WD single platter 500gb and every since I flashed these AOKP my touch screen has been unresponsive with out the power cord plugged in. Without the power cord I cant use the touch screen but when I plug it up and reboot it works perfect. Please help me this is really frustrating. I dint have this issue with ICSBLUE V03. Its like if the battery isnt full thats when I have issues.

7-zip gives error...?

---

Originally Posted by nicktastique

This build should also work on sdcard models:

https://hotfile.com/dl/168399637/6c1....ext4.bz2.html
No other changes.

...just downloaded it, but 7-zip (on win7) stops with "1 error in file" at ca 26% ...(downloaded twice, tried several times). Is there another download possibility? Thx.

Originally Posted by donovan1914

I have a strange issue I hope someone can help me with it for the HDD 250 9g. I had swapped out my hdd for a WD single platter 500gb and every since I flashed these AOKP my touch screen has been unresponsive with out the power cord plugged in. Without the power cord I cant use the touch screen but when I plug it up and reboot it works perfect. Please help me this is really frustrating. I dint have this issue with ICSBLUE V03. Its like if the battery isnt full thats when I have issues.

I've hit a touchscreen bug also. The top (in portrait) or left side (in landscape) of the screen sometimes won't register touches. I thought I broke the tablet, but CM9 works just fine.

Do you have this with surdu's build, with my build, or both?

I'll look into it.

---------- Post added at 09:50 AM ---------- Previous post was at 09:41 AM ----------

Originally Posted by ducatisto

...just downloaded it, but 7-zip (on win7) stops with "1 error in file" at ca 26% ...(downloaded twice, tried several times). Is there another download possibility? Thx.

Hmm, the bzip works for me, but here is a link to the uncompressed image:

https://hotfile.com/dl/168704742/fb2...chos.ext4.html

Originally Posted by nicktastique

Hmm, the bzip works for me, but here is a link to the uncompressed image:
https://hotfile.com/dl/168704742/fb2...chos.ext4.html

...thx, got me bzip2, that did the job. Wonders everywhere ...

Originally Posted by benoitb85

The video (using mx player, or gallery) shows vertical or horiontal bars sometimes in fast paced scenes. As if there wa a lack of VSync or something like that. I didn't experience it with the stock firmware.

There are a few graphics issues with all the CM9/AOKP ROMs at the moment, and this is one of them. I have no idea why it happens, but it is on my todo list. It's kind of low priority since it mostly works well enough, but I/someone will get to it before long.

Originally Posted by benoitb85

Also when you scroll with the touchscreen sometimes it is shaky and goes back and forth on 5mm at a high frequency (>5Hz). Is that the same issue ?.

This may sound crazy, but my theory is that this is related to a design flaw in the g9 where the touchscreen sometimes detects touches through the back or front-sides of the tablet from the hand you're holding it with. I think it's rapidly detecting touch events through the back, which cause things to jitter. Have you seen this happen when you're not holding the device, e.g. laying on flat surface?

Maybe Settings -> Developer Options -> Show touches can confirm/deny whether this is the problem.

In general, the touchscreen performs poorly on stock and AOKP, but seems to me to be much better on CM9 - which is weird because they all use the same kernel, and EventHub and InputReader for CM9 and AOKP are basically identical.

Originally Posted by benoitb85

Is there a parameter in AOKP settings of developper settings such as GPU acceleration or dithering that should be enbled/disabled to avoid those issues ?

Try toggling Settings -> Developer options -> Force GPU rendering.

I've had issues with screen tearing in CM9, try changing the CPU governor from Interactive to Ondemand, for me this practically eliminated screen tearing.

Sent from my GT-I9001 using Tapatalk 2

surdu's build

Beta 3 HDMI

---

According to the first post HDMI is working on Beta 3 - but as i've tried it it doesn't - the screen stays black.

Is it me or the Beta3?