"This tutorial is for people who just bought a cell phone and want to customize, but afraid to make any modification other than Workshops.
All I'll be teaching procedures have been tested by me (Xperia Live With Walkman Wt19a) remembering that this tutorial can also be applied to other devices on the same line, but the person is aware of everything you're doing.."
Ok So we go to our interest.
It is recommend to have the Pc and Compani SUS for any drivers.
I will describe in steps. "Before you do anything BATTERY MUST BE 100% LOAD"
1║. You need to have CWM "ClockworkMod" To do a FULL BACKUP which TER is EXTREMELY IMPORTANT. If you can not install the CWM, progress is TOTALLY PUT IN YOUR OWN RISK. (OK JA ADVISED THIS).
3║. After completing the download extract to a folder.
4║.1. Run install-cwm '. Cmd
install-cmw1.cmd - Xperia Arc / Neo install-cmw2.cmd - Xperia Mini / MiniPro / Active / Live With Walkman
2.Enable USB Debugging on device
3.Connect your device using usb data cable
4.Follow on screen instruction
5║. Once that's done you should have already installed the CWM ClockworkMod then we will open it when you boot the phone. (When the phone shine brighter or some flashing LED FINGER TIGHT TO KEEP THE VOLUME DOWN BUTTON AND HOLD briefly) This should open the recovery console CWM.
6║. Now with the volume knob go to Backup / Restore. Hold down the middle button to enter the option. (Choose Backup) just wait a bit and BACKUP YOUR READY NOW IS READY.
9║. Now plug the phone into fastboot MODE. is vol + and connect usb cable. Blue LED must be connected. Once that's done your computer will start looking for drivers and will not find ... Then Extract the ADB drivers into a Folder and indicate to the drivers downloaded. This should work. If you are having trouble installing the drivers ADB. I recommend you download a program called Driver Identifier. To locate the driver.
10║. Now with the drivers already instaldos We Correctly Download the program called Flash Tools.
11║. Open the program Flash Tools. After clicking on the radius and choose MODE Fastboot. Not FlashBoot NOT CONFUSE. Leave the phone connected in mass storage mode. Now in clice Reboot into fastboot mode (via Fastboot) Note If you want to connect in Manual mode Fastboot can be connected normally.
12║. Now comes the most decisive moment of all ... You sure which kernel will apply. For if you apply some kernel Wrong at Risk of Damaging the Machine there only using an Advanced Backup has been done to resurrect.
13║. In my case my Mobile Live With WT19 is a Walkman So I will choose the Kernel Kamarush to show in this tutorial. Link to Kernel http://forum.xda-developers.com/showthread.php?t=1709032
14║. In the Flash Tools Click Select Kernel to Flash. Go up the file you Kernel for Low LWW Live With Walkman. Once you have the absolute certainty that the Kernel is right ok just take two clicks and it already in the kernel will install automatic a process is really fast.
15║. Now when the phone started so get in CWM.
16║. Now you need to do a reset FULL. First MAKE TO DO a FACTORY RESET AFTER A WIPE CACHE PARTITION. GO TO ADVANCED TO CHOOSE AND WIPE Dalvik CACHE.
17║. Then come back and go to install zip from sdcard. Choose choose zip from sdcard.
18║. Now go to the folder that has the ROM. done so just follow the installation procedures is an aroma "Do not clear it does not change anything already WT19 is defined as the first. Do not change anything in the options wipe.
Perfect runs very smooth and no lag. Add active you need a little overclocking can leave with 1600 Max and 1000 Min. From to play hard and not spend so much battery. Optimal Real ICS ROM V5.1. With some Fix
XDA Developers was founded by developers, for developers. It is now a valuable resource for people who want to make the most of their mobile devices, from customizing the look and feel to adding new functionality. Are you a developer?