Change Log 5.17.2013
1. Couple little Linux patches
2. Fixed Bluetooth issue, where certain people could NOT connect to there device
3. Thats it..........
Change Log 5.14.2013
1. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.296 from codeaurora.org
2. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.298 from codeaurora.org
3. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.301 from codeaurora.org
4. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.306 from codeaurora.org
5. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.308 from codeaurora.org
6. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.309 from codeaurora.org
7. Linux 3.4.45
8. A few patches to get completely sync'd with CM
Change Log 5.9.2013
1. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.295 from codeaurora.org
2. ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6
3. Revert "ASoC: msm: Support independent left-right channel volume cont
4. Revert "arm: mm: Add VM_ARM_EMPTY_MAPPING flag to mark the PMD gaps
5. Merged in AU_LINUX_ANDROID_JB_2.5.04.02.02.040.292 from codeaurora.org
6. Couple patches for schedulers main code
7. Raise MDP bandwidth requirements
(this should get rid of the screen flicker that some were getting)
8. Compiled with latest Linaro
9. Linux 3.4.44
10. Completely sync'd with CM
Change Log 5.5.2013
1. JB_2.5.04.02.02.040.288 from codeaurora.org
2. Couple of USB patches
3. Couple of display driver updates
4. Totally sync'd with CM
Change Log 5/3/2013
1.
Added GPS Scheduler and Governor option in "Extras" screen for TW USERS (used to automatically change sched and gov when GPS is IN USE
2. Patches from CM and google
3. Revert "msm_fb: display: allow backlight update after first update"
4. Linux 3.4.43
5. ARM: fault: assume no context when IRQs are disabled during data abort.
6. lowmemorykiller: make default lowmemorykiller debug message useful
7. Updated FAUX Sound
8. Renamed zip files a little to be shorter and easier to read
Change Log 4.27.2013
1.
BRAND NEW BOOT SPLASH IMAGE THANKS TO TASK650
2. Linux 3.4.42
3. A few updates from CM so its up to date
4. Fixed issue with KTweaker not setting lower temps on KThermal screen
5.
Fixed asswax thanks for implementation DecimalMan
6.
Fixed smartassH3
7. Thats about it.........
Change Log 4.24.2013
MD4 update that include:
1. Camera
2. Display drivers for UI
3. Memory functions
4. Wireless
5. USB
6. Video drivers for video playback
7. mmc/block/ssd
8. Sound drivers
Change Log 4.19.2013
1. Linux 3.4.40
2. Linux 3.4.41
3. ROW scheduler updates
4. Update to date with CM and code aurora
5. Lots of Linux patches for SMP and some optimizations
6. More but no time........
Change Log 4.11.2013
1. Optimizations for ROW scheduler
2. Optimizations for CFQ scheduler
3. Optimizations for DEADLINE scheduler
4. Some backgound scheduler optimizations and entropy stuff
5. Merge in codeaurora JB_2.5.04.02.02.40.236
6. Fix composition issues when framework rebooted in suspend
7. REVERT regulator fix up that was causing high power drain and instability
8. Merge in codeaurora JB_2.5.04.02.02.40.242
9. 100% synced with CM
Change Log 3.27.2013
1. ICS is NOW removed from build
2. Linux 3.4.37
3. Brand new KTweaker, new look and feel
YOU MUST FORCE STOP AND CLEAR DATA FOR KTWEAKER, SEE FULL INSTRUCTIONS BELOW. DO NOT RESTORE ANY OLD BACKUP FILES!!!!!!!!!!!
4. Auto-hotplug from thalamus modded to work with KT747, you can check this box in "General" screen to enable hotplugging for governors that dont do it there own.
5. Fix up freq tables math errors from cobraboy85
6. New steps in lower range, they are now 81, 135, 189, 378 instead of 96, 144, 196, 384
7. Toggle for Trinity colors from Morfic. Its under "Extras", when you change the option, you must turn screen off and on once to take effect
8. Added restore Stock Voltage Table to "Voltage" screen
9. Many other patches and tweaks I cant remember, lol....
ENJOY
WIPE INSTRUCTIONS
1. Go to the normal place to "Clear Data" and click "Force Stop" 1ST(usually on "Settings-> Apps")
2. Click "Clear Data"
3. Boot to recovery and flash
4. When u open KTweaker for the first time it should NOT ask you any questions, if it does, go back to step #1
Change Log 3.14.2013
1.
Added sampling_rate_screen_off variable to ktoonservative to control sampling rate while screen is OFF. Im using 90,000 for this new tunable.
2. cpufreq: intellidemand: stop crash when changing sampling_rate
3. Sound Control: Sound control from Faux for all versions
4. Patches from faux on his Sound Control
5. Couple adreno (GPU) updates from CM
6. Added asswax governor: LOL
7. Linux 3.0.69
8. Battery level Mhz control: Added battery_ctrl_disable_chrg option to disable battery control while plugged in and charging
9. Remove some debug that is spamming dmesg
10. Ktoonservative: Add ability to disable hotplugging while connected to bluetooth
(ONLY WORKING ON TW, HAVING ISSUES ON AOSP).
Change Log 3.6.2013
1. Touchwiz 4.1 ONLY update
2. Remove power button from boost buttons (all other buttons are still active)
3. Fix issue with setting "read_idle" in row scheduler
4.
UKSM memory management (If you want to read up on it, check this out: http://www.phoronix.com/scan.php?pag...tem&px=MTEzMTI)
Change Log 3.5.2013
1. Linux 3.0.67
2. Linux 3.0.68
3. Updates from CM
4. Pulled in some MA6 updates from Sprint official JB 4.1.2
5. Added FIFO scheduler for all versions
6. ktoonservative: Ignore disable_hotpluging while screen is off
7. Fix bug in Battery level Mhz control when only low or only high is set
8. ktoonservative: Add boost_2nd_core_on_button that turns on 2nd core on power button, back button, home button and menu button
9. Hold 2nd core on for 1 second when boost 2nd options are being used
Change Log 2.19.2013
1. Linux 3.0.63
2. Linux 3.0.64
3. Linux 3.0.65
4. frandom added to JB versions
5. Trinity/morfic colors
6. Several Linux fixes/patches/updates
7.
Added Screen OFF scheduler profile
8.
New version of KTweaker (Version 2.4)
9.
Added battery level MAX MHZ setting to ktoonservative
10. Updated ramdisk to 4.2.2 standards for AOSP
11. Added ASIX network support
Change Log 2.9.2013 TEST
1. FRANDOM ENABLED TEST
(Thanks to f1vefour, idcrisis and Ryuinferno)
Change Log 2.8.2013
1.
WIFI TETHERING IS BACK!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2. acpuclock-8960: Change HFPLL_NOMINAL_VDD to 700 to allow more than 125mV UVage for steps higher than 1080 MHz
Change Log 2.7.2013
1. Linux 3.0.61
2. Linux 3.0.62
3. Updates to ROW scheduler
5. Sync with CM patches
6. Updates to ktoonservative. 3 new tunables.
7. ktoonservative: boost_turn_on_2nd_core: a 1 turns on 2nd core on touch, 0 does not
8. ktoonservative: no_2nd_cpu_screen_off: a 1 enusres 2nd core stays off while screen is off, 0 does not
9. ktoonservative: disable_hotpluging: a 1 keeps 2nd core on FULL time, 0 keeps hotplugging normal.
10. Add ASIX LAN Support
11. Couple of wireless: bcmdhd updates
12. Upgrade to Linaro 4.7-2013.01-1-2013
13. Update to old conservative gov.
Change Log 1.26.2013
1. Linux 3.0.58
2. Linux 3.0.59
3. Linux 3.0.60
4. Updates to ROW scheduler
5. Lots of updates from CM (with CM ROM updates lag should be gone after exiting games
6. Couple updates to ktoonservative to help battery and speed things up
Change Log 1.9
1. Built with newest Linaro compiler so its EVEN FASTER (about 25 billion times faster)
2. Added Row scheduler to all other versions
3. Added Zen scheduler to all other versions
4. CM patches for AOSP guys
5. Thats all I can remember
*****4.2 Specific*****Change Log 1.9
1. Added Yoyo mode to ktoonservative (mimics the test from 1/5) and is
DISABLED by default
2. To enable yoyo mode, set "use_yoyo_cpuload" to a 1, I recommend setting "cpu_down_block_cycles" to a 22 or 44.
3. You can enable yoyo if you feel ktoonservative is lagy since moving to 4.2. It does jump around the Mhz range and hotplugs the 2nd cpu alot more than normal mode but is very responsive!.
Change Log 12.29
1. Fully synced with CM 10.1 code
2.
Data is BACK on CM 10.1!!!!!!!!!!!!!!!!!!!!!!!
3. Fix some issues with smartassV2
4. BFQ v5r1
5. Newest KTweaker 2.3 included
6. Video is working
7. Im sick as hell with the flu so thats the end...
Change Log 12.20
1. Linux 3.0.57
2. Improve modem stability across all D2 devices from CM
3. Couple of Linux updates
Change Log 12.11
1. Linux 3.0.52
2. Linux 3.0.53
3. Linux 3.0.54
4. Linux 3.0.55
5. Linux 3.0.56
6. Tweaks to lulzactive
7. Quite down the vibration driver which speeds up typing and capacitive buttons
8. Changes to Bluetooth Mhz setting logic (its nearly perfect now, only issue where it might revert is ending a call)
9. More TCP filter code from madmack
10. Merged in TMO and ATT official TW-JB code
11. Black screen code from the test kernel is in here to reduce black screen wake issue
12. Thats all I can think of and ENJOY!....
Change Log 11.13
1. Linux 3.0.50
2. Linux 3.0.51
3. Ktoonservative tweaks and added tunable "down_threshold_hotplug" for more control.
4. Screen OFF profile for Mhz will be ignored while on the phone now, since it was causing some lag when triggering prox sensor
5. Sync with CM10 display code updates
6. Sync with CM ramdisk changes
7.
Tethering is back but kept some LJ7 stuff plus block some TCP multicast crap to save battery
8. Fix issue with Bluetooth Minimum Mhz profile while screen was off (should be working now)
9. Fixed issues with governor applying when not needed during screen ON/OFF
10. OFF TO OAKLAND NOW!!!!!
Change Log 10.31
1. Linux 3.0.49
2. Intellidemand Governor
3. SLP Governor
4. Many fixes for KTweaker
5. Updated wifi driver to LJ7 for AOSP JB kernel
6. Some other stuff I cant remember, got a plane to catch early tomorrow...
Changelog 10.28
1. Linux 3.0.47
2. Linux 3.0.48
3. Fixed screen off profile issue
4. Added Screen OFF Profile governor selection
5. Added Bluetooth Profile Connection Minimum Mhz
6. Modified Swipe2wake to be 3 selections (OFF, On always, On when plugged in). KT-Widget will show S2WP with a check mark when Plugged in option is selected.
7. Something else I cant remember
8. The Touchwiz jellybean version here is the same as the one I released yesterday.
Change Log 10.14 thru 10.22
1. Linux 3.0.45
2. Linux 3.0.46
3.
New Wheatley Governor
4.
New Sleepy Governor
5. Swipe2Wake (this option DOES hold a wakelock so I would only use it while plugged in, it eats about 3-4% per hour on battery)
6. Added Swipe2Wake checkbox on KT-Widget
7. -O3 and other compiler optimization flags from the super crazy fast editions
8. Made from real panther, so u know its good
9. Super optimized SQL driver (300% faster on database access, you will see bit speed gains in MMS and Settings apps)
10. Some other stuff I can remember
Change Log 10.9
1. Linux 3.0.44
2. Linux 3.0.45
3. Some usb patches
4. UHS SD3.0 patches
5.
Compiled with Linaro 4.7 September
6. More error checking in KTweaker and KT-Widget
Change Log 10.3
1. CM10 sync
2. Added KTweaker option to name your backup and restore with a list of ones you created
3.
Added KTweaker Widget (Widgets name is KTweakerW in you widget list)
4. Added KTweaker option to disable Toast messages
5. Updated wifi driver, increases speed and may help the people that were having connectivity issues
6. Added KTweaker option to adjust Scheduler Options
Change Log 9.23
1. Synced up with all CM10 commits
2. Added way to disable Touch Booster (its under First Touch Booster to disable both) (Doesnt work for ondemand for AOSP version since CM has there own version of Touch Booster)
3. Added Yes/No question to Backup option
4. Several Linux Commits and reverts to help stability
5.
A few patches that seem to have fixed the flash AOSP and my kernel together in the same recovery session. Give it a try
6. Changed Screen off Mhz to match rest of the app without extra Zeros
It is recommended to wipe app data for KTweaker before flashing this kernel since a few options got resized and text is different in Sccreen Off
Change log 9.18
1. Added CM10/AOKP CRT patch
2. Linux 3.0.43
3. Lots of patches for speed and battery
4. Updated KTweaker (trying to make it ask the Min/Max question less)
5. Many, many more..........
Change Log 9.13
1. Added vibration interface, its under Extras in KTweaker
2. GPU OC
3. A ton of Linux patches
4. Some more CM patches
5. There is a lot of improvement in speed and stability here.....
Change Log 9/10
1. Added "Fast Charge" (It has been recommend to only use it for DC charging and not for USB but can be used for USB but in VERY rare cases can cause damage to your USB port)
2. Brand new code to try and keep OCing locked and not revert
3. Updates to ondemand and pegasusq gov
4. Lots of CM10 commits
5. Linux patches.....
Change Log 9-5
1. Reverted some memory management stuff to see if I can kill the super lag
2. KTweaker, changed boot option to lots of choices for delaying the set on boot (If you have issues with the update to the app, clear data, I tried my best to update the settings based on old data)
3. CM10 sync for AOSP-JB guys
4. A few other I dont remember
Change Log 8-31
1. CM10 pathces for AOSP kernels
2. Added +-25 and +-5 volts in Voltage Screen in KTweaker (press menu button to use them)
3. Tweaks to ktoonservative governor
4. Memory management fixes
5. MSM patches
6. A whole bunch of stuff .......
Change Log 8-30
1. Reverted compiler and changed opto flags
2. Updated KTweaker, Screen off Profile Mhz setting is working now.
3. Updated KTweaker, boot setting should apply now, added 5 second delay.
4. CM update for the Jellybean kernel
5.
Ktoonservative Governor
6. Many, many more.....
Change Log 8.27
1. Compiled with newer version of Linaro so it is 100,000,000,000,000 times faster
2. Updated KTweaker, added Screen off Profile Mhz setting, backup settings to sdcard, restore setting from sdcard.
3. Lots of audio patches from the CM guys
4. etc...........
Change Log 8.24
1. Boot on stock table
2. KTweaker app included in flash
3. Overclock to 2106mhz
4. Underclock to 96mhz
5. 8,000,000 changes, too long to list
Change Log 8.15
1. Updated to latest patches from CM team
2. Linux 3.0.41
3. Lots of tweaks to the Normal and OC'd mhz ranges
4. Upped bus frequencys on a few steps for better performance
5. Lowered minimum voltage to 700
6. Upped maximum voltage to 1400
7. Added govs: abyssplug, badass, lagfree, scary, superbad
8. Removed GPU OC since it was slowing down the phone
9. So much other underwear..........
Change Log 8.10
1. Fix camera issue from lockscreen
2. Re-enabled DVFS
3. patch camera to stop reboots
Change Log 8.9
1. All CM10 code merged in including
2. msm:video upgrades
3. gpu: ion
4. usb tweaks
5. Tweaked pegasusq gov from Gokhan
6. and a million more......
Change Log 8.3
1. Major update merging in LG8 code from CM
2.
Wifi issue should be fixed for you Sprint guys
3. bcmdhd 1.15.15
4. arm: show present cpu instead of online cpu in /proc/cpuinfo
Change Log 8-1
1. Linux 3.0.39
2. sched/nohz cleanup
3. Enable FAIR_GROUP_SCHED
4. Video: msm tweaks (video should be much smoother)
5. USB: gadget: Fix crash in ci13xxx_udc.c
6. Many many more......
Change Log 7-28
1. Fixed gyro sensor
2. msm: rotator: Add secure session flag to rotator start data
3. Added kexec support
4. d2att: Move ramconsole to lower memory
5. dhd wakelock helper
6. Fixed charge while phone powered down
7. Compiler opto's
Change Log 7-27
1. Added BFQ v3r4 scheduler
2. Added more wake_lock debug
3. Opto's for wake_lock routine
4. optimize checksum routines
5. net: wireless: bcmdhd: Reduce priority for dhd_dpc and watchdog
6. Battery and speed improvements
7. Countless others..........
Change Log 7-22
1. Made a change to see if Foreign phones will show 192mhz
2. Linux 3.0.38
3. Reduced logging from chatty drivers
4. Lots of iosched treaks
5. 50,000 lines of code merge in from my other kernels...
Change Log 7-21
1. Started from scratch rebasing from Jellybean source for both ICS & JB versions
2. Put voltages back to stock'ish, so people can undervolt on there own (to get back to what my older kernels were, remove 75mhz from all steps except 192mhz and the 4 OC steps.)
3. Added init.d script to get try to get those stuborn phone to set 1512 as default max.
4. JB version now has all my good stuff in it from previous versions
FYI: CM10 does not want to cooperate with the max Mhz settings from my scripts, since it is a beta ROM, so you will have to set it manually with "Voltage Control" or run the script I put in "/system/etc/init.d/00post-init"
Introducing XDA:DevCon – A Conference For Developers By Developers
>
[KERNEL][SPRINT][AOSP/TOUCHWIZ-JELLYBEAN][5/17/2013] KT747 - MD4 - KTweaker
Print
Email
[KERNEL][SPRINT][AOSP/TOUCHWIZ-JELLYBEAN][5/17/2013] KT747 - MD4 - KTweaker
View Profile
View Forum Posts
Linear Mode
