2.13.651.1 Firmware Bits

---

Hey there. Today we were fortune enough to see such a beautiful update with Android 4.0.4 and Sense 4.1. Along came some new firmware. Here you'll find three flashable zips, one with the entire firmware package (new hboot, kernel, and recovery), one without hboot and recovery, and one just alike, but without the kernel, hboot, and recovery. I've tested the no kernel, hboot, and recovery version, and it was successful.

This updates your Baseband (Radio) to
v.1.12.11.0809, And your HBoot (Bootloader) to v.1.19.00.

Don't blame me if your phone blows up. I didn't make these, I am simply sharing them. I am here to help if you need it though.

Requirements:
S-Off

How to flash (install):
Download your zip of choice, and rename it to PJ75IMG.zip, and save it to the root of your external sd card. Reboot into bootloader mode, and accept the update. Let it run through, and wait for the successful message. Don't forget to delete the PJ75IMG.zip off of the root of your external sd card after updating, so that if worst case scenario, you can reboot into bootloader or recovery mode. Once you flash the latest firmware, DO NOT ATTEMPT TO REVERRT TO THE PREVIOUS FIRMWARE VERSION. It has been reported to brick devices for good!

Downloads:
These two include the newest kernel, which has been reported to break WiFi on roms based on old versions. (1.13.651.1 and 1.22.651.1) Proceed with caution...
2.13.651.1 Firmware (Includes New Kernel, HBoot, and Recovery.) - REMOVED FOR SAFETY MD5: 562d9d40a03645438fe24918aed3da42

2.13.651.1 Firmware (No HBoot or Recovery) - http://db.tt/mo2LJ9Am MD5: 71EB50966907B194DF23312C2850EB33

This version is the complete firmware update package, excluding the new kernel, hboot, and recovery.
(Recommended)
2.13.651.1 Firmware (No Kernel, Hboot, or Recovery.) - http://db.tt/K4bKYiib MD5: 4D3EE2D35F3A6210ADF8FAC0D2F6C9E5

Q&A:

Q: "I flashed a version with the new kernel included, and all of a sudden my WiFi is borked, F*#% YOU RYDAH! How do i fix it?"

A: Revert to a kernel that is based on your rom version. You have a few options, 1: Restore a recent nandroid. Be sure to only restore the "boot" partition, and you'll be good to go. 2: Re-flash the kernel you were using. If you'd like, you could take the modules folder from the OTA, and push them over, replacing the old modules folder. (SYSTEM/LIB/MODULES/) - That is merely a suggestion, as others have stated, but I cannot confirm this, as I am running 2.13.651.1.

Q: "I put the zip on my external SD card, booted into bootloader mode, and it didn't recognize/find the zip, what the hell man!?"

A: Make sure you don't have a copy on the root of your internal memory card, and be POSITIVE, that it is named correctly. (NOT PJ75IMG.zip.zip)


Sent From My HTC Evo 4G LTE, On The Now Network From Sprint!

This may be a dumb question but why would anyone want to flash the hboot and recovery version or is it useful for developers somehow?

thanks boss!!!!!!!! your quick!!!!!!!

Originally Posted by Evo_Shift

This may be a dumb question but why would anyone want to flash the hboot and recovery version or is it useful for developers somehow?

No, but someone will eventually use it.

Originally Posted by evo401

thanks boss!!!!!!!! your quick!!!!!!!

No problem. Just trying to follow in Freezas steps, since he's not here anymore.


Sent From My HTC Evo 4G LTE, On The Now Network From Sprint!

Originally Posted by Rydah805

Hey there. Today we were fortune enough to see such a beautiful update with Android 4.0.4 and Sense 4.1. Along came some new firmware. Here you'll find two flashable zips, one with the entire firmware package (new hboot, kernel, and recovery) and one just alike, but without the kernel, hboot, and recovery. I've tested the no kernel, hboot, and recovery version, and it was successful.

This updates your Baseband (Radio) to
v.1.12.11.0809, And your HBoot (Bootloader) to v.1.19.00.

How to flash (install):
Downliad your zip of choice, and rename it to PJ75IMG.zip, and save it to the root of your external sd card. Reboot into bootloader mode, and accept the update. Let it run through, and wait for the successful message.

Downloads:
2.13.651.1 Firmware (Includes New Kernel, HBoot, and Recovery.) - http://db.tt/UP4nCkQF

(Recommended)
2.13.651.1 Firmware (No Kernel, Hboot, or Recovery.) - http://db.tt/K4bKYiib

More info coming soon...


Sent From My HTC Evo 4G LTE, On The Now Network From Sprint!

Is it possible to throw up a version with the kernel included as well, but not the HBOOT or RECOVERY for those of S-OFF that want to flash the kernel through bootloader as well?

If it is possible to just take the boot.img (kernel) from the one version you have up and add it to the one w/o the boot.img in it and flash that through bootloader; I can just do that...

Let me know please and THANK YOU MUCH for being so quick about it.

just flashed worked perfect!!

Originally Posted by pinky059

Is it possible to throw up a version with the kernel included as well, but not the HBOOT or RECOVERY for those of S-OFF that want to flash the kernel through bootloader as well?

If it is possible to just take the boot.img (kernel) from the one version you have up and add it to the one w/o the boot.img in it and flash that through bootloader; I can just do that...

Let me know please and THANK YOU MUCH for being so quick about it.

Yea, hold up.


Sent From My HTC Evo 4G LTE, On The Now Network From Sprint!

Can I flash this being on mean Rom 3.4 or would I need to got to a stock rooted rom?

Sent from my EVO using xda app-developers app

Originally Posted by Rydah805

(Recommended)
2.13.651.1 Firmware (No Kernel, Hboot, or Recovery.) - http://db.tt/K4bKYiib

Is this equivalent to installing just the radio?

Originally Posted by forceOnature

Is this equivalent to installing just the radio?

yes this should install the new radio, and PRI..i havent installed it yet so i am not sure what else is included