LuPuS v13
Changelog
Code:
[B]v13[/B]
- Added option to enable Quick Key Reset (enable / disable via LuPuS Menu)
- Tuned Governors
* superbad
* lionheart
* virtuous
* darkside
* conservative
* smartassH3
- Really use google snappy zRam (improves zRam)
- Added zCache
- Removed persistent RAM
- Removed some more kernel debugging
- uninterruptible sleep
- Update SIO & CFQ
- Added Ultra-KSM
- Removed optimized AES & SHA1 routines
- Updated TWRP to 2.4.4
*Fixed Mount USB Storage in TWRP
- Updated CWM to latest Official CWM source
*Removed reboot options
*Re-added power off and reboot system now to main menu
- Improved wifi-loading scripts
- Clean up of lupus menu
- Fixed root issue on some devices
- Reworked kernel logs (can be found in /data/local/tmp)
- Boot.d - If phone is taking a long time to start move suspicious init.d scripts to /system/etc/boot.d
They will be run in background and won't affect boot time.
LuPuS MENU
You can run lupus menu from terminal or scriptmanager or similar, you must run as root or script will exit with a message
in terminal
* information is in lupus menu
1/
CIFS Menu *
2/
zRam Menu *
- Enable
Disable
Set zRam size ( default is 60)
3/
Frandom Menu *
4/
Clean and Remove tweaks
5/
Tweak Menu
Note all tweaks are preset from here and option to set as init.d's
- Clean all temp files
SQLITE optimizations
LMK Optimizations
Network optimizations
Defend against ARP spoofing
Remove android logger
SDcard speed tweak
Flag blocks as non-rotational
6/
Choose Recovery
7/
Performance Menu
Note all options are se by user input from here and option to set as init.d's
- Set CPU frequencies
Set Governor
Set IO-Scheduler
Voltage Control
VM tweaks (explained below)
VM Tweaks
dirty ratio and dirty background ratio 1 & 2
This controls how often the kernel writes data to "disk" (in our case the internal microSD system card, not the removable microSD card). When your apps write data to disk, Linux actually doesn't write the data out to the disk right away, it actually writes the stuff to system memory and the kernel handles when and how the data is actually going to be flushed to the disk. These values represent a percentage, the higher the percentage, the longer it waits to flush, the lower the percentage, the more often flushes will occur. Now remember, we are dealing with solid state storage, not the traditional disk platter and spindle. So we are actually able to delay flushes a little longer with solid state versus a traditional hard drive disk.
dirty_expire_centisecs
How old "dirty" data should be before the kernel considers it old enough to be written to disk. It is expressed in 100ths of a second.
dirty_writeback_centisecs
This is the interval of when the writeback daemons periodically wake up and write "old" data out to disk. It is expressed in 100ths of a second.
min free kbytes
This is used to force the Linux VM to keep a minimum number of kilobytes free. The VM uses this number to compute a pages_min value for each lowmem zone in the system. Each lowmem zone gets a number of reserved free pages based proportionally on its size. Default is 2048kb.
overcommit_memory
This controls overcommit of system memory, possibly allowing processes to allocate (but not use) more memory than is actually available.
0 - Heuristic overcommit handling. Obvious overcommits of address space are refused. Used for a typical system. It ensures a seriously wild allocation fails while allowing overcommit to reduce swap usage. root is allowed to allocate slighly more memory in this mode. This is the default.
1 - Always overcommit. Appropriate for some scientific applications.
2 - Don't overcommit. The total address space commit for the system is not permitted to exceed swap plus a configurable percentage (default is 50) of physical RAM. Depending on the percentage you use, in most situations this means a process will not be killed while attempting to use already-allocated memory but will receive errors on memory allocation as appropriate.
Swappiness
A property for the Linux kernel that changes the balance between swapping out runtime memory, as opposed to dropping pages from the system page cache. Swappiness can be set to values between 0 and 100 inclusive. A low value means the kernel will try to avoid swapping as much as possible where a higher value instead will make the kernel aggressively try to use swap space.
VFS Cache Pressure
File system cache (dentry/inode) is really more important than the block cache above in dirty ratio and dirty background ratio, so we really want the kernel to use up much more of the RAM for file system cache, this will increas the performance of the system without sacrificing performance at the application level. The default value is 100, as a percentage, and what you want to do is lower the value to tell the kernel to favor the file system cache and not drop them aggressively.
If you like my work please consider buying me a beer or something else 
by clicking the DONATE ME button, of course it isn't needed but greatly appreciated and keeps me motivated.
Downloads
If you like my work please consider buying me a beer or something else
by clicking the DONATE ME button, of course it isn't needed but greatly appreciated and keeps me motivated.
#####################################################################################################################
480p
LuPuS_zeus_jBv13-ram.img
md5 = d3588985ea241c4e44cf27be30b74b0f
720p
LuPuS_zeus_jBv13-full.img
md5 = 9d5d17ca438ae745a793a6841b320f48
