[ROM][JB][JZO54K] CyanogenMod 10 by ivendor - Release 2.5 - Kernel 3.0.x

---

Hi everyone, i'm back again.
This ROM is based on my previous CM9 rom and arco's work for Galaxy W device. Arco will not release CM10 for our device, so i'll continue his work and improve CM10 for our phone.
From alpha 7 it's based on CAF kernel jellybean branch (big thanks to arco for his work).The versions below alpha 7 are based on the same ICS kernel 2.6.35 used in CM9.

What's working:
Audio
Receiving and making calls
GPS
Compass
Proximity sensor
Wifi
Bluetooth
USB mass storage
HW accelerated gui
HW accelerated video
Camera
BLN
USB/Wifi tethering
VSync
USB OTG (Experimntal support)

Partially working:
Graphical glitches in Panorama preview

Screenshots




CM10 Install Guide

Note: CM for Galaxy S Plus is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.

Download CM10 and gapps-jb zips and put in /sdcard

• 2013-05-02: CM10 Release 2.5 [1] [2]
  MD5SUM: 3af7e7c8d4f01178b3ea036840a26645
  • Switch 2G to 3G and viceversa, now smooth and stable
  • Adjusted default autobrightness levels (14) to match new driver (CastagnaIT)
  Patch for EMMC data partition broken devices (read FAQ)

• 2013-04-27: CM10 Release 2 [1] [2]
  MD5SUM: fe33c7273c2b75c7816d15b1ac45278a
  • Fixed EDGE Data Connection
  • New Display Drivers (CastgnaIT)
  • New Lux Sensor Drivers (CastgnaIT)
  • Sync with lastest CM Sources
  Patch for EMMC data partition broken devices (read FAQ)

• 2013-04-04: CM10 Release 1 [1] [2]
  MD5SUM: 78fcea8704ecfb4d30a82b35f29f0998
  • Fixed WEP Connections
  • Fixed reboot when playing webm video
  • Fixed line glitch on front camera preview
  • New static boot image with Cid

• 2013-03-25: CM10 beta 4 [1] [2]
  MD5SUM: a5a7d1ddfc43d45f9fcaa9515a59cd5d
  • More stable kernel
  • Switched to BLNv9 (thanks CastagnaIT for his kernel patches)
  • Vibration intensity adjustable from System Device Settings (thanks CastagnaIT for his kernel patches)
  • Enabled Ram Console (when the phone reboots you can get last dmesg reading file /proc/last_kmsg)
  • Sync with lastest CM Sources

• 2013-03-11: CM10 beta 3 [1] [2]
  MD5SUM: 016a54574c34b61b40a65a70e7c415da
  • New Samsung Wifi Driver
  • Fixed bug with activation of Backlight Wakelock and Force Fast Charge at startup
  • Sync with lastes CM Sources

• 2013-02-23: CM10 beta 2 [1] [2]
  MD5SUM: 166602def2c86a241ae69233c9993a5e
  • USB OTG experimental support
  • USB Fast charge experimental support
  • Various changes on kernel from Arco
  • Sync with lastes CM Sources

• 2013-02-11: CM10 beta 1 [1] [2]
  MD5SUM: 83e0a70fa63cf8c9e28db3f032e8081a
  • Kernel adjustments for Camera (credits arco)
  • Face unlock working in portrait mode
  • Fix Screen On/Screen Off glitch (credits CastagnaIt)
  • Enable WebGL in browser (credits arco)
  • Fixed Switch 2G/3G and other RIL adjustments
  • Sync with lastes CM Sources

• 2013-01-30: CM10 alpha 7 [1] [2]
  MD5SUM: ce22078b1e84cd0540680520a168c3a5
  • Switch to CAF kernel 3.0.x branch jellybean
  • VSync Enabled
  • Sync with lastest CM Sources

• 2012-12-26: CM10 alpha 6 [1] [2]
  MD5SUM: e13f727ca7cf9c8c2d1d1069f91df5c5
  • Fix for Data connection not working on SIM PIN Unlock
  • Fix for VOIP calls in speaker mode (should affect skype and other voip applications)
  • Sync to lastest CyanogenMod sources

• 2012-11-25: CM10 alpha 5 [1]
  MD5SUM: 024d0a51ade61758a445e545dfd582dc
  • Integrated OTA Update Center application
  • New RIL changes from arco's ROM
  • Sync with lastest CM Sources

• 2012-11-22: CM10 alpha4 [1] [2]
  MD5SUM: ca34c0948855fd4873c4f601ca106db3
  • 2012-11-25: Support for OTA Update Center
  • No changes only a working build, instead of the crappy alpha3 build

• 2012-11-19: CM10 alpha3 [Update from Alpha 2]
  MD5SUM: c79424dddf8b57879885200c074abecd
  • Fix Hardware accelerated video

• 2012-11-18: CM10 alpha2 [1]
  MD5SUM: 4971085afd76f5e09257550aa903111d
  • Initial release

• CM10 alpha1 - prerelease
  No more available

• gapps UPGRADE REQUIRED
  • gapps version 20121011
    MD5SUM: 4e9e7ec3c22b0b3471bd05d62b8a659d
  • gapps picasa add-on 20121011
    MD5SUM: 58fd9fcefc27c638b8ddd416ef9daef3
    
    Please verify the md5sum to be sure you got the right one.

Before you install CM10: Preparation (First three are optional. If you want to start fresh, these can be skipped)

1. Install AppBak from Market, run it and save a list of all your apps.
2. Install SMS Backup and Restore from Market, run it and backup your SMS history.
3. Install Call Logs Backup and Restore from Market, run it and backup your call log history.
4. Boot into CWM5 recovery. Make a full backup. You will need this backup later if you decide to go back to your previous ROM and data.

WARNING: Many apps will Force Close crash if you restore data from a previous ROM.

Install

1. Use CWM5 or CWM6. 2013-04-08 UPDATE!!! new 6.0.2.8 with safe kernel 2.6 (no EMMC bug) and sideload support!
   For flashing with Odin: recovery-clockwork-6.0.2.8-ariesve-kernel26.tar.md5 | recovery-clockwork-6.0.2.8-ariesve-kernel26.tar.md5 (Needs AriesVE.ops)
   For flashing as zip file: recovery-clockwork-6.0.2.8-ariesve-kernel26.zip | recovery-clockwork-6.0.2.8-ariesve-kernel26.zip
   • Warning: Only use this recovery to flash CM10. Otherwise, you risk bricking your phone![/URL]
2. Wipe data and cache.
3. Flash update*.zip.
4. Flash gapps*.zip. You must flash gapps after every upgrade to CM10 since /system is formatted, wiping your previous add-ons.
5. Reboot phone.
6. After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.
7. Warning: Do not restore backup data of system apps!
   • If you restore a bad backup with cached settings in telephony.db in data/data/com.*.*.telephony it can break MMS.
   • It seems that restoring backups can also break Calendar sync.

Upgrades
Upgrades from previous versions of CM10 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between CM10 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.

From alpha5 on, you can update between CM10 versions with the OTA Update Center application, which is already present in the ROM installed.

Credits
CyanogenMod Team
Arco68 for his huge work for our device
CastagnaIT,Cristopher83 for their kernel patches
smeroni68 for his bug report and testing work

Sources
All my sources are on GitHub

FAQ

• For recovery bootloop problem you should at this post
• BLN feature recap:
  • It is activable/deactivable from BLN Control Application (Free or Pro version)
  • You can launch it from Settings->Device->Advanced
• No System Sounds UI:
  • Download this app
  • Set the system volume to maximum (7). You should hear the sounds again.
• Only the devices with EMMC data partition broken, starting from Release 2 can use specific patch released along with the ROM to boot successfully. The patch must be applied after the main ROM upgrade and needs an external sd with second partition of type ext4 used as replacement for broken data one. Make sure this partition is big enough (At least, 1.5 GB it's suggested). It also means that those devices cannot use OTA Update for installing ROM newer versions because it doesn't install the patch needed.

thanks

thanks and nice work i will try it tomorow

Gesendet von meinem GT-I9001 mit Tapatalk 2

Downloading now... ivendor, you are the man!

Finally its here. Thanks ivendor and thanks arco for your hard work!

Welcome to jelly bean !
ivendor finally you released the ROM...many thanks to arco68 and ivendor for their hard work....

Now our device having 2 CM10...

Rom is awesome !



Sent from my GT-I9001 using Tapatalk 2

After rebooting, it takes one or two minutes for the phone to connect to my carrier and get some signal. When I was using cm9 built by you, the phone had the same behavior (which I thought was normal). however, I changed to arco's cm9 a couple weeks back and with it, after entering the PIN, it would take at most a couple seconds to acquire some signal.
I'm not sure if it's related, but my carrier uses national roaming to provide its services.
also, this happened with at least rc3/4/5 of cm9, the others idk.

thanks in advance. so far the rom is great.

Wasn't the butter experience solved by Doomsday? He said he managed to make 100% butter experience work in his CM10 and his Rom was really smooth!

Sent from my GT-I9001 using Tapatalk 2

Installed, no problem and very very smooth. Thanks.

Sent from my GT-I9001 using xda app-developers app