[GUIDE] Flash/Revive your Galaxy Y through ODIN v3.07 (including ext4 bricks!)
Many people brick their phones by flashing ROM's and stuff (like ext4 converter)....
This is how to revive phones which are soft-bricked.
THIS WORKS WITH EXT4 CONVERTER BRICKS!!
||||||||||||| WINDOWS ONLY!!!!! |||||||||||||
MAYBE HEIMDALL IN FUTURE!
A> On your computer
1.Download and install Samsung Driver Pack for Mobile Phones (x86 and x64)
2.Download and extract this zip file, which contains latest ODIN v3 3.07 and totoro_0623.pit (For Repartitoning, which is done in case of file system change [like ext4 FS])
B> On your Samsung Galaxy Y
1.Power off the phone/Make sure its off!
2.Go into DOWNLOAD Mode.
1.After turning your phone off, press these keys together (A warning screen should show up):
Power Off + Volume Down + Home (Middle Button)
NOTE: Do not press Volume Up, right now on the Download mode's warning screen.
C> On your computer
4.Download any stock ROM package from sir Doky's thread.
5.Extract the zip file, you will get:
PDA_xxxx.tar, MODEM_ or PHONE_xxxxx.tar, CSC_xxxxx.tar
6.Browse in PDA Section and select PDA_xxxx.tar
7.Browse in CSC Section and select CSC_xxxxx.tar
8.Browse in MODEM Section and select PHONE_xxxxx.tar
9.Connect your Galaxy Y through USB.
D> On your Samsung Galaxy Y
1. Hit Volume Up on Warning screen,
E> On your computer
1.Make sure phone is connected through USB, you must see Blue 0:[COMxx] in the first ID:COM and "Added" in the message box.
ADDITIONAL STEPS FOR THOSE WHO've CHANGED THE FILE SYSTEM:
1.Check the Re-Partition checkbox.
2.In Re-Partition section ,click PIT and browse the totoro_0623.pit
3.Wait and Voila! PHONE REVIVED!