Post Reply

[Unlock] Bootloader unlock - Updated November 26th 2012

OP jcase

24th November 2012, 10:54 PM   |  #21  
Dri94's Avatar
Senior Member
Flag Florida
Thanks Meter: 568
 
1,767 posts
Join Date:Joined: Oct 2011
Donate to Me
More
adb doesnt find my phone. are there settings i have to make, not new to android but new to htc devices, and alos my first time with adb doing this.
Attached Thumbnails
Click image for larger version

Name:	Capture.jpg
Views:	897
Size:	45.9 KB
ID:	1508366  
24th November 2012, 10:57 PM   |  #22  
Argumentation's Avatar
Senior Member
Flag Washinton, DC
Thanks Meter: 151
 
382 posts
Join Date:Joined: Feb 2012
Donate to Me
More
Quote:
Originally Posted by Dri94

adb doesnt find my phone. are there settings i have to make, not new to android but new to htc devices, and alos my first time with adb doing this.

Make sure USB Debugging is checked in the Developer Options menu.
24th November 2012, 11:00 PM   |  #23  
forey79's Avatar
Senior Member
Flag viola,ks
Thanks Meter: 22
 
104 posts
Join Date:Joined: Dec 2010
More
just to clarify you push "adb install CIDGen.apk" while the phone is in fastboot usb then reboot the phone and run the CIDGen app then boot back into fastboot usb??
24th November 2012, 11:00 PM   |  #24  
jcase's Avatar
OP Forum Moderator / Senior Recognized Developer - Taco Vendor
Flag Sequim WA
Thanks Meter: 8,055
 
3,855 posts
Join Date:Joined: Feb 2010
Donate to Me
More
Quote:
Originally Posted by jonah1234

WHERE IS THE IMEI!?

in settings, then status
24th November 2012, 11:00 PM   |  #25  
jcase's Avatar
OP Forum Moderator / Senior Recognized Developer - Taco Vendor
Flag Sequim WA
Thanks Meter: 8,055
 
3,855 posts
Join Date:Joined: Feb 2010
Donate to Me
More
Quote:
Originally Posted by forey79

just to clarify you push "adb install CIDGen.apk" while the phone is in fastboot usb then reboot the phone and run the CIDGen app then boot back into fastboot usb??

no, isntall teh app when android is booted
24th November 2012, 11:03 PM   |  #26  
Dri94's Avatar
Senior Member
Flag Florida
Thanks Meter: 568
 
1,767 posts
Join Date:Joined: Oct 2011
Donate to Me
More
Quote:
Originally Posted by Argumentation

Make sure USB Debugging is checked in the Developer Options menu.

it is, but still no work :/ "adb devices" list nothing too
24th November 2012, 11:04 PM   |  #27  
forey79's Avatar
Senior Member
Flag viola,ks
Thanks Meter: 22
 
104 posts
Join Date:Joined: Dec 2010
More
Quote:
Originally Posted by jcase

no, isntall teh app when android is booted

ok run adb while booted in rom.......... thank you for your help kind sir
24th November 2012, 11:04 PM   |  #28  
jonah1234's Avatar
Senior Member
Thanks Meter: 1,090
 
1,761 posts
Join Date:Joined: May 2012
I'm getting this when trying to adb restore backup.ab

Code:
C:\android-sdk-windows-1.6_r1\tools>adb restore backup.ab
Android Debug Bridge version 1.0.22

 -d                            - directs command to the only connected USB devic
e
                                 returns an error if more than one USB device is
 present.
 -e                            - directs command to the only running emulator.
                                 returns an error if more than one emulator is r
unning.
 -s <serial number>            - directs command to the USB device or emulator w
ith
                                 the given serial number
 -p <product name or path>     - simple product name like 'sooner', or
                                 a relative/absolute path to a product
                                 out directory like 'out/target/product/sooner'.

                                 If -p is not specified, the ANDROID_PRODUCT_OUT

                                 environment variable is used, which must
                                 be an absolute path.
 devices                       - list all connected devices

device commands:
  adb push <local> <remote>    - copy file/dir to device
  adb pull <remote> <local>    - copy file/dir from device
  adb sync [ <directory> ]     - copy host->device only if changed
                                 (see 'adb help all')
  adb shell                    - run remote shell interactively
  adb shell <command>          - run remote shell command
  adb emu <command>            - run emulator console command
  adb logcat [ <filter-spec> ] - View device log
  adb forward <local> <remote> - forward socket connections
                                 forward specs are one of:
                                   tcp:<port>
                                   localabstract:<unix domain socket name>
                                   localreserved:<unix domain socket name>
                                   localfilesystem:<unix domain socket name>
                                   dev:<character device name>
                                   jdwp:<process pid> (remote only)
  adb jdwp                     - list PIDs of processes hosting a JDWP transport

  adb install [-l] [-r] <file> - push this package file to the device and instal
l it
                                 ('-l' means forward-lock the app)
                                 ('-r' means reinstall the app, keeping its data
)
  adb uninstall [-k] <package> - remove this app package from the device
                                 ('-k' means keep the data and cache directories
)
  adb bugreport                - return all information from the device
                                 that should be included in a bug report.

  adb help                     - show this help message
  adb version                  - show version num

DATAOPTS:
 (no option)                   - don't touch the data partition
  -w                           - wipe the data partition
  -d                           - flash the data partition

scripting:
  adb wait-for-device          - block until device is online
  adb start-server             - ensure that there is a server running
  adb kill-server              - kill the server if it is running
  adb get-state                - prints: offline | bootloader | device
  adb get-serialno             - prints: <serial-number>
  adb status-window            - continuously print device status for a specifie
d device
  adb remount                  - remounts the /system partition on the device re
ad-write
  adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
  adb root                     - restarts adb with root permissions

networking:
  adb ppp <tty> [parameters]   - Run PPP over USB.
 Note: you should not automatically start a PPP connection.
 <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
 [parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]
  <localdir> can be interpreted in several ways:

  - If <directory> is not specified, both /system and /data partitions will be u
pdated.

  - If it is "system" or "data", only the corresponding partition
    is updated.

C:\android-sdk-windows-1.6_r1\tools>/adb restore backup.ab
'/adb' is not recognized as an internal or external command,
operable program or batch file.

C:\android-sdk-windows-1.6_r1\tools>adb restore backup.ab
Android Debug Bridge version 1.0.22

 -d                            - directs command to the only connected USB devic
e
                                 returns an error if more than one USB device is
 present.
 -e                            - directs command to the only running emulator.
                                 returns an error if more than one emulator is r
unning.
 -s <serial number>            - directs command to the USB device or emulator w
ith
                                 the given serial number
 -p <product name or path>     - simple product name like 'sooner', or
                                 a relative/absolute path to a product
                                 out directory like 'out/target/product/sooner'.

                                 If -p is not specified, the ANDROID_PRODUCT_OUT

                                 environment variable is used, which must
                                 be an absolute path.
 devices                       - list all connected devices

device commands:
  adb push <local> <remote>    - copy file/dir to device
  adb pull <remote> <local>    - copy file/dir from device
  adb sync [ <directory> ]     - copy host->device only if changed
                                 (see 'adb help all')
  adb shell                    - run remote shell interactively
  adb shell <command>          - run remote shell command
  adb emu <command>            - run emulator console command
  adb logcat [ <filter-spec> ] - View device log
  adb forward <local> <remote> - forward socket connections
                                 forward specs are one of:
                                   tcp:<port>
                                   localabstract:<unix domain socket name>
                                   localreserved:<unix domain socket name>
                                   localfilesystem:<unix domain socket name>
                                   dev:<character device name>
                                   jdwp:<process pid> (remote only)
  adb jdwp                     - list PIDs of processes hosting a JDWP transport

  adb install [-l] [-r] <file> - push this package file to the device and instal
l it
                                 ('-l' means forward-lock the app)
                                 ('-r' means reinstall the app, keeping its data
)
  adb uninstall [-k] <package> - remove this app package from the device
                                 ('-k' means keep the data and cache directories
)
  adb bugreport                - return all information from the device
                                 that should be included in a bug report.

  adb help                     - show this help message
  adb version                  - show version num

DATAOPTS:
 (no option)                   - don't touch the data partition
  -w                           - wipe the data partition
  -d                           - flash the data partition

scripting:
  adb wait-for-device          - block until device is online
  adb start-server             - ensure that there is a server running
  adb kill-server              - kill the server if it is running
  adb get-state                - prints: offline | bootloader | device
  adb get-serialno             - prints: <serial-number>
  adb status-window            - continuously print device status for a specifie
d device
  adb remount                  - remounts the /system partition on the device re
ad-write
  adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
  adb root                     - restarts adb with root permissions

networking:
  adb ppp <tty> [parameters]   - Run PPP over USB.
 Note: you should not automatically start a PPP connection.
 <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
 [parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]
  <localdir> can be interpreted in several ways:

  - If <directory> is not specified, both /system and /data partitions will be u
pdated.

  - If it is "system" or "data", only the corresponding partition
    is updated.

C:\android-sdk-windows-1.6_r1\tools>
24th November 2012, 11:08 PM   |  #29  
forey79's Avatar
Senior Member
Flag viola,ks
Thanks Meter: 22
 
104 posts
Join Date:Joined: Dec 2010
More
Quote:
Originally Posted by jcase

no, isntall teh app when android is booted

ok one more off the wall ? can this be done with out the sim card in it ?
24th November 2012, 11:15 PM   |  #30  
jcase's Avatar
OP Forum Moderator / Senior Recognized Developer - Taco Vendor
Flag Sequim WA
Thanks Meter: 8,055
 
3,855 posts
Join Date:Joined: Feb 2010
Donate to Me
More
Instructions say you need a newer (ICS or newer) version of adb update your tools

Quote:
Originally Posted by jonah1234

I'm getting this when trying to adb restore backup.ab

Code:
C:\android-sdk-windows-1.6_r1\tools>adb restore backup.ab
Android Debug Bridge version 1.0.22

 -d                            - directs command to the only connected USB devic
e
                                 returns an error if more than one USB device is
 present.
 -e                            - directs command to the only running emulator.
                                 returns an error if more than one emulator is r
unning.
 -s <serial number>            - directs command to the USB device or emulator w
ith
                                 the given serial number
 -p <product name or path>     - simple product name like 'sooner', or
                                 a relative/absolute path to a product
                                 out directory like 'out/target/product/sooner'.

                                 If -p is not specified, the ANDROID_PRODUCT_OUT

                                 environment variable is used, which must
                                 be an absolute path.
 devices                       - list all connected devices

device commands:
  adb push <local> <remote>    - copy file/dir to device
  adb pull <remote> <local>    - copy file/dir from device
  adb sync [ <directory> ]     - copy host->device only if changed
                                 (see 'adb help all')
  adb shell                    - run remote shell interactively
  adb shell <command>          - run remote shell command
  adb emu <command>            - run emulator console command
  adb logcat [ <filter-spec> ] - View device log
  adb forward <local> <remote> - forward socket connections
                                 forward specs are one of:
                                   tcp:<port>
                                   localabstract:<unix domain socket name>
                                   localreserved:<unix domain socket name>
                                   localfilesystem:<unix domain socket name>
                                   dev:<character device name>
                                   jdwp:<process pid> (remote only)
  adb jdwp                     - list PIDs of processes hosting a JDWP transport

  adb install [-l] [-r] <file> - push this package file to the device and instal
l it
                                 ('-l' means forward-lock the app)
                                 ('-r' means reinstall the app, keeping its data
)
  adb uninstall [-k] <package> - remove this app package from the device
                                 ('-k' means keep the data and cache directories
)
  adb bugreport                - return all information from the device
                                 that should be included in a bug report.

  adb help                     - show this help message
  adb version                  - show version num

DATAOPTS:
 (no option)                   - don't touch the data partition
  -w                           - wipe the data partition
  -d                           - flash the data partition

scripting:
  adb wait-for-device          - block until device is online
  adb start-server             - ensure that there is a server running
  adb kill-server              - kill the server if it is running
  adb get-state                - prints: offline | bootloader | device
  adb get-serialno             - prints: <serial-number>
  adb status-window            - continuously print device status for a specifie
d device
  adb remount                  - remounts the /system partition on the device re
ad-write
  adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
  adb root                     - restarts adb with root permissions

networking:
  adb ppp <tty> [parameters]   - Run PPP over USB.
 Note: you should not automatically start a PPP connection.
 <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
 [parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]
  <localdir> can be interpreted in several ways:

  - If <directory> is not specified, both /system and /data partitions will be u
pdated.

  - If it is "system" or "data", only the corresponding partition
    is updated.

C:\android-sdk-windows-1.6_r1\tools>/adb restore backup.ab
'/adb' is not recognized as an internal or external command,
operable program or batch file.

C:\android-sdk-windows-1.6_r1\tools>adb restore backup.ab
Android Debug Bridge version 1.0.22

 -d                            - directs command to the only connected USB devic
e
                                 returns an error if more than one USB device is
 present.
 -e                            - directs command to the only running emulator.
                                 returns an error if more than one emulator is r
unning.
 -s <serial number>            - directs command to the USB device or emulator w
ith
                                 the given serial number
 -p <product name or path>     - simple product name like 'sooner', or
                                 a relative/absolute path to a product
                                 out directory like 'out/target/product/sooner'.

                                 If -p is not specified, the ANDROID_PRODUCT_OUT

                                 environment variable is used, which must
                                 be an absolute path.
 devices                       - list all connected devices

device commands:
  adb push <local> <remote>    - copy file/dir to device
  adb pull <remote> <local>    - copy file/dir from device
  adb sync [ <directory> ]     - copy host->device only if changed
                                 (see 'adb help all')
  adb shell                    - run remote shell interactively
  adb shell <command>          - run remote shell command
  adb emu <command>            - run emulator console command
  adb logcat [ <filter-spec> ] - View device log
  adb forward <local> <remote> - forward socket connections
                                 forward specs are one of:
                                   tcp:<port>
                                   localabstract:<unix domain socket name>
                                   localreserved:<unix domain socket name>
                                   localfilesystem:<unix domain socket name>
                                   dev:<character device name>
                                   jdwp:<process pid> (remote only)
  adb jdwp                     - list PIDs of processes hosting a JDWP transport

  adb install [-l] [-r] <file> - push this package file to the device and instal
l it
                                 ('-l' means forward-lock the app)
                                 ('-r' means reinstall the app, keeping its data
)
  adb uninstall [-k] <package> - remove this app package from the device
                                 ('-k' means keep the data and cache directories
)
  adb bugreport                - return all information from the device
                                 that should be included in a bug report.

  adb help                     - show this help message
  adb version                  - show version num

DATAOPTS:
 (no option)                   - don't touch the data partition
  -w                           - wipe the data partition
  -d                           - flash the data partition

scripting:
  adb wait-for-device          - block until device is online
  adb start-server             - ensure that there is a server running
  adb kill-server              - kill the server if it is running
  adb get-state                - prints: offline | bootloader | device
  adb get-serialno             - prints: <serial-number>
  adb status-window            - continuously print device status for a specifie
d device
  adb remount                  - remounts the /system partition on the device re
ad-write
  adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
  adb root                     - restarts adb with root permissions

networking:
  adb ppp <tty> [parameters]   - Run PPP over USB.
 Note: you should not automatically start a PPP connection.
 <tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
 [parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ <directory> ]
  <localdir> can be interpreted in several ways:

  - If <directory> is not specified, both /system and /data partitions will be u
pdated.

  - If it is "system" or "data", only the corresponding partition
    is updated.

C:\android-sdk-windows-1.6_r1\tools>


Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Droid DNA Original Android Development by ThreadRank