[ROM][4.2.1] NAND with Various Roms - S8500 [25.12.2012]

---

Thanks To
Rebellos,Tigrouzen,Oleg_k, mijoma, nbates66, anghelyi, Volk204, mikegapinski and many others.
And Thanks to all These Rom's developer


Links
Overall project thread : http://forum.xda-developers.com/show....php?t=1459391
Rebellos's CM10 "Jelly Bean" thread : http://forum.xda-developers.com/show....php?t=1851818

WHAT DOESN’T WORK (BUGS/TODO)
all Modem (GSM/GPRS) functionallity
GPS
Microphone
Magnetometer
Optical sensor
Power and hold key handling has to be polished
Battery Gauge (NOTE: It can destroy your battery calibration due to prolonged usage! You had been warned.)

WHAT DOES (SHOULD) WORK
Sound playback
Screen
Wifi/BT
Accelerometer
Camera
SD Card
Battery now shows 50 %
Overclock now possible to 1200 MHz Max
Available Ram 285~290 MB on NAND
Fixed Moving app to SD
Fixed installable apps problem(Previously Some apps couldn't install)

NAND Kernel for Jelly Bean 4.2.1 : http://d-h.st/1BK

Source is available on Github Repo : https://github.com/Tigrouzen & https://github.com/Rebell


Installation for NAND

Bada 2.0 is required

• Download 2 packages: BOOTFILES, armlinux_boot for S8500 :
  Releases: http://goo.im/devs/Rebellos/wave
• Download zImage (Kernel) from upper.
• Start Bada.
• Copy zImage to the Bada's User partition (the one about 390MB big).
• Copy whole .zip to the SD Card
• Flash BOOTFILES and FOTA using Multiloader. http://dl.dropbox.com/u/14962487/Multiloader.png
  If you have been already using FOTA bootloaders, you don't need to flash BOOTFILES.
• Switch off your phone
• Go to CWM using Call End + Volume Up buttons
• Be patient, first bootup will keep unresponsible on Black Screen for up to 5 minutes.
• CWM Recovery starts, pick:
  - install zip from sdcard
  - choose zip from sdcard
  - "blablabla.zip"
  - Yes - install
• After finished with the same method install Gapps Package (On Tsunami It is not needed)
• Then reboot holding the Power key

Fixing buttons aligment (Use CWM to fix it) : http://d-h.st/6a6

For Remove NAND : You need to Reflash Bada (it is NAND)

Official Thread of CyanogenMod 10.1 : http://forum.xda-developers.com/show....php?t=2039755

Video Review by Me (Hero355) : http://www.youtube.com/watch?v=sRvtjdVbPNg


Downloads

Cyanogen Mod 10.1 Jelly Bean 4.2.1 for S8500 - 22.12.2012 : http://d-h.st/GNv

Update
Cyanogen Mod 10.1 Jelly Bean 4.2.1 for S8500 - 25.12.2012 : http://d-h.st/iei

Gapps Package for CM 10.1 : http://d-h.st/HsN

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Official thread of C-RoM_Mix Rom : http://forum.xda-developers.com/show....php?t=1925195

Video Review soon


Downloads

C-RoM_Mix Rom : http://d-h.st/YI6


SGS3 Touchwiz Style Addons for this Rom only : http://d-h.st/6io

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Official Thread of Tsunami Rom : http://forum.xda-developers.com/show....php?t=2036872


Video Review by MrWolf (on video it is JB 4.1.2 something like it) : http://www.youtube.com/watch?v=iKqDDJJ7QEQ


Downloads

Tsunami Rom : http://d-h.st/A6a

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Official Thread of SlimBean Rom : http://forum.xda-developers.com/show....php?t=2060374

Video Review by me (hero355) : : https://www.youtube.com/watch?v=ZLoWQbbDGQ8


Downloads

SlimBean Rom : http://d-h.st/m1j


Gapps Package for SLim Rom : http://d-h.st/ifO

dream ?

---

Am I dreaming or you guys port best 3 android roms on our waves ?

Great thread Hero355! Hope mods will let you keep it 'cause its a master piece for all users to keep a general view over all the ROMs realeased!

However, its not absolutely right that to remove CM10.1 you have to reflash Bada, 'cause you can use this .zip ( http://forum.xda-developers.com/show...&postcount=393 ) and it will do the work for you
Also, if you can move the CM banner to the top.. it would give to the thread a more "symmetrical" aspect (just designer complex, you know..)

s8530

---

why not for wave2?
i m waiting

Originally Posted by vans37

Приложение вконтакте))))
Ты откуда?_)))

Проверьте профиль "More Info"

Originally Posted by Fahrenheit51

Great thread Hero355! Hope mods will let you keep it 'cause its a master piece for all users to keep a general view over all the ROMs realeased!

However, its not absolutely right that to remove CM10.1 you have to reflash Bada, 'cause you can use this .zip ( http://forum.xda-developers.com/show...&postcount=393 ) and it will do the work for you
Also, if you can move the CM banner to the top.. it would give to the thread a more "symmetrical" aspect (just designer complex, you know..)

Thanks

nope this is NAND version and CM10 remove doesn't work on it

Anyone has good designing of CM would be appreciate

Originally Posted by kktkaran

why not for wave2?
i m waiting

Ask Developers




little updated first post

Originally Posted by hero355

nope this is NAND version and CM10 remove doesn't work on it

Anyone has good designing of CM would be appreciate

Sorry, i didnt catch it was the NAND version of CM :P my mistake.

@Fahrenheit51 I updated CM banner

Wich one to download?)
I dunno ...
In tsunami by Tigrouzen I could overclock my phone,now,in vortex I can't(dunno need it or not )
BUT VERY BIG THANKS TO YOU DEVZ!now i really able to install almost every game(especially EA games which i couldn't install)

Originally Posted by vans37

Wich one to download?)
I dunno ...
In tsunami by Tigrouzen I could overclock my phone,now,in vortex I can't(dunno need it or not )
BUT VERY BIG THANKS TO YOU DEVZ!now i really able to install almost every game(especially EA games which i couldn't install)

Tsunami rom has less free Ram memory
Cm10.1 & SLimBean is better choice

P.S : Use Semophore app to Overclock

Originally Posted by hero355

Tsunami rom has less free Ram memory
Cm10.1 & SLimBean is better choice

P.S : Use Semophore app to Overclock

Спасибо!)))