[ROM][JB 4.2.2][JDQ39E] ThinkingBridge ROM [E975][May 7, 2013][Stable 2]

---

Greets to the people here at XDA,

We "Team BRIDGE" are here, attempting to compile Jelly Bean 4.2.2 Build JDQ39E from Android Open Source Project (AOSP). This thread is created to provide you people with the change logs, downloads, Instructions, bug submissions and development updates. So, kindly take over your ROM discussions to the Discussion thread (Thanks to Christian Nothing) under General Section, no appreciation posts or discussions are accepted here. If you like to appreciate, please press the THANKS button instead. Proceeding now towards the main content of this ROM.

About

ThinkingBridge ROM is an Android aftermarket firmware which is built with the purpose to offer maximum stability, high performance & an appealing User Interface. This ROM is based on The Android Open Source Project (AOSP) and CyanogenMod code. We are here to contribute to the Android Open Source world and provide our users with the Best-Of-Android.

Team BRIDGE:

htchoi5609
Black-Prince
woorim98
black9
DJBhardwaj
Akibingbing


Supported Devices:

GSM Galaxy Nexus (maguro)
Nexus S (crespo)
Nexus 7 (grouper)
Nexus 4 (mako)
Galaxy S2 (i9100)
Galaxy S2 (i9100g)
Galaxy S3 (i9300)
Galaxy Note (N7000)
Galaxy Note-II (N7100)
Optimus G (E975)

Disclaimer

/*
* Your warranty is now void.
*
* I'm not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/

General Info & Introduction

Android Open Source Project: Or in short AOSP. Android is an open-source software stack created for mobile phones and other devices. The Android Open Source Project (AOSP), led by Google, is tasked with the maintenance and further development of Android. Many device manufacturers have brought to market devices running Android, and they are readibly available around the world.
Rooting: Android rooting is the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control (known as "root access") within Android's subsystem. Rooting is often performed with the goal of overcoming limitations that carriers and hardware manufacturers put on some devices, resulting in the ability to alter or replace system applications and settings, run specialized apps that require administrator-level permissions, or perform other operations that are otherwise inaccessible to a normal Android user.


Fully Functional Features:

RIL (Calls, data and texts)
Wifi
Bluetooth
Touch UI
Contacts
Browser
Lockscreen
Settings
Notification drawer and toggles
Gallery
Quick Toggles


Features Offered By ThinkingBridge ROM

ThinkingBridge Welcome App (About the Team, Changelogs & Contacts us)
ThinkingBridge Wallpapers App
CyanogenMod FileManager
DSP Manager
Trebuchet Launcher
ROM Settings
-General UI (Add Custom Boot Animations, Custom Carrier Label, StatusBar Brightness slider, Transparency Settings, UI Mode etc.
-Power Menu (Select what to show up in Power Menu and other Power Menu settings)
-Navigation Bar (Enable/Disable NavBar, Add/Remove buttons, change colors, configure widgets etc.)
-Navigation Ring (Set NavBar Ring targets)
-Pie Controls (Enable/Disable pie, change colors, Trigger Area, Size, Alignment, Gravity etc.)
-Toggles (Add/Change/Remove toggles, change toggle style etc.)
-Battery (Change the battery icon on StatusBar, change colors, battery bar etc.)
-Clock (Change the Clock icon on StatusBar, change colors, AM/PM Style, Alignment, clock actions etc.)
-Signal (Change Signal icon on StatusBar, change colors, hide Signal bar etc.)
-Lockscreen (Change lock options, modify widgets, change colors etc.)
-Custom Shortcuts (Set custom shortcuts to the lockscreen)
-Custom Targets (Add custom targets to the lockscreen)
-Lock Clock Widget (Modify/change/remove the clock on the lockscreen)
-Sound (Enable volume panel, flip phone settings, headphones and bluetooth headset otpions etc.)
Theme Engine Support
Parition Info (Information about /System, /data, /cache, /sdcard and EXT partitions)
CPU Settings (Change Governor, Min/Max CPU freq., scheduler)
Koush's Superuser App
New Custom Toggles (Favourite contact, Clock toggle, Fast Charge, LTE, Pie, NFC, Quick record, Quiet hours, Screenshot, Signal, Sleep, Sound state, USB tether, WiFi tether, Current user)
Custom Camera features
4 Way Reboot (Reboot, Bootloader, Recovery & Hot-Reboot)

Above are the features clearly visible to your eyes but still a full list of Kernel and script optimizations is still not mentioned.

PHP Code:

Change logs
Quote:
Feb 17, 2013 [Beta 1]

    Initial Jellybean 4.2.2 JDQ39 release: AOSP 4.2.2_r1 branch merged
    Support new devices
    Fixed korean camera sound
    Support multiusers on phone
    Added Pie control
    Added Custom hardware keys


Feb 24, 2013 [Beta 2]

    Fixed Camera FC
    Fixed Quiet Hours Custom Tile
    Added Quick Record Tile
    Fixed Updating 2G, WiFi Tether and LTE Tiles
    Make System layour fill the homescreen properly on Expanded Desktop mode
    Smoother lockscreen framework on low RAM devices


Mar 20, 2013 [Beta 3]

    Pie control update
    Removed Sense style recent menu
    Toggle rewrite
    Fixed SystemUI crash
    More detail back to kill toast
    Navbar performance update
    Fixed Expanded Desktop mode
    Fixed Camera settings FCs
    Fixed Tapatalk FCs
    Fixed many bugs
    Added many features

April 5, 2013 [Beta 4]

    Performance Update
    Optimized System
    Redesign memory usage in recent apps
    Recents Lag Fix From PA
    ScreenShot QuickTrash
    Support new devices
    Volume toggle
    Memory size toggle
    Pie control update
    Selectable text in gtalk
    Adjust torch intent for CM torch
    Reduce boot up time
    Rework NavBar UI in ROMControl
    Added variable size pattern
    Added lock screen pattern dot
    Fixed navbar height reset issue
    Fixed audio services
    Fixed CMCircle battery interval
    Fixed screen off CRT animation
    Fixed multiuser layout for phones

April 23, 2013 [stable1]

    Add Share ThinkingBridge ROM into DeviceinfoSettings
    Support Ad-Hoc (IBSS) mode
    Support new devices
    Screenshot rotaion
    Status Bar Network Traffic Indicator
    Improved SystemUI layout
    Optimize Low-end devices
    Hide statusbar clock also for DashClock
    Update screenshot toggle
    Remove lag when launching an app
    Fixed Photosphere/Camera FCs
    Fixed memory leaks
    Fixed after change signal type or text color 
    Fixed many bugs

May 7, 2013 [Stable 2]

    stable2

    - Common: Merged android 4.2.2_r1.2
    - Common: Added FullSwing on ScrollView,Webview
    - Common: Added AOKP Ribbon
    - Common: Added turn off action to WiFi Tether notification
    - Common: Rework LockScreen
    - Common: Fixed SystemUI memory leaks
    - Common: Support Galaxy S4
    - Contacts: Update T9 dialer
    - Contacts: Display location support
    - Contacts: Make company name on title bar more readable 
    - Contacts: force left justification on separator headers in contact list
    - Phone: Added support for proprietary libaudio voice quality filter
    - Phone: Ignore restart ringer once silent requested when incoming call
    - Settings: Added AirplaneMod Enabler into settings
    - Settings: Auto-brightness updates
    - Settings: Fixed many bugs
    - ROMControl: Added LED Control
    - ROMControl: Show back action arrow in main menu
    - Wallpaper: Follow ParanoidAndroid GNU GPLv2 license and add solid color 


Downloads
ROM | GApps | Github


Instructions to Install

Download the latest ROM zip and GApps from the download tabs above.
Connect your Optimus G into USB Storage mode to the PC via USB data cable.
Drag the downloaded two zips to the root of your storage (and not in any folder).
Power off the device, press Volume Up + Home + Power buttons altogether until you see the Recovery screen
You are now in Recovery mode.
If you are flashing this ROM for the first time (coming from another ROM): wipe /data (factory reset) /cache, dalvik-cache and /system
If you are updating this ROM (coming from previously installed version of this ROM): wipe /cache and dalvik-cache
"Install zip from sdcard" > "choose zip from sdcard" > select the ROM zip and press "Yes" to flash.
Follow the above step again to flash the GApps.
When all is done, select "reboot system now".

Want to report a bug? Read this first!
The below stated format shall be strictly followed to report any bug related to this specific ROM. Make sure that you have not overclocked over the provided CPU frequency and also that you are not running any custom kernels. Such bugs will be subjected to ignorance
Bug submission should majorly be done at the Bug Tracker.
Quote:

Bug Description: Describe the bug in English and as in-depth as possible.
How to reproduce the bug: Describe the instructions to reproduce your bug, so that I can confirm that its universal
Logcat: A logcat is considered very necessary during a bug report and will help me solve the bug at a fast rate. So, provide a logcat to your bug if possible.

Credits & Thanksgiving

CyanogenMod
AOKP
ParanoidAndroid

Reserved

---

Welcome.it's really a pleasure to see our optimus g getting more devs here.i just wish there would be more users too.
Will make a backup and will try your project too.

Sent from LG E975 pwd by CM 10.1

At last! ROMs are finally coming through. Thanks a lot!

Ok,i flashed the rom,i like it,especially the customization options.
One small request and suggestion,if i may.i'm using 240dpi and at this value,the answer call button is off centered to right.chasmodo from n7000 section gave me the solution,but it's up to you if you test it or not.

I quote him:

This works for n7000, I fink it'll do the trick for Optimus, too:

1. go to packages/apps/Phone/res/layout/incall_touch_ui.xml and

2. find the line that contains

|android:gravity

3. change it to be

|android:gravity="left|top"

4. get the build going

Thanks.
Sent from LG E975 pwd by CM 10.1

Great rom! Everything seems to be working fine. Why is there no option to edit hardware key functions in lockscreen? I've never seen a custom ROM without that option.

Sent from my LG-E975

Great work on this ROM I really love all the settings we have. thank you very much!!!
Just need to create the apn for LTE on f180k and it's ok ^^

Does it work on F180?

---

Does this ROM work on F180 variants?

Power off the device, press Volume Up + Home + Power buttons altogether until you see the Recovery screen>>>i dont see any HOME button on my device Optimus G E975..???

Originally Posted by LeAnhTuan2505

Does this ROM work on F180 variants?

Yes works like a charm. you need to create a new apn for lte.

Originally Posted by hamba9551

Power off the device, press Volume Up + Home + Power buttons altogether until you see the Recovery screen>>>i dont see any HOME button on my device Optimus G E975..???

If you have unlock the bootloader, for our devices it's volume down+power then you are in bootloader press twice volume down then power to go to the recovery.