[BOOTLOADER] 2nd-Bootloader/Recovery unlock process for KFire 2 [TWRP 188.8.131.52]
Introducing: Kindle Fire 2nd-bootloader + TWRP 184.108.40.206 for the Kindle Fire 2nd GEN
*** USE AT YOUR OWN RISK! WHILE I TRY MY BEST TO PROVIDE WORKING KERNELS/ROMS, I AM NOT RESPONSIBLE IF THIS SOFTWARE OR ANYTHING I'VE WORKED ON SUDDENLY FRIES YOUR DEVICE. ***
*** READ CAREFULLY BEFORE DOING ANYTHING ***
*** Kindle Fire 1st-gen ROMs/KERNELS are *NOT* compatible with the Kindle Fire 2. Please only flash ROMs/KERNELS that are made for the Kindle Fire 2. ***
** IF YOU HAVE QUESTIONS, RE-READ THROUGH THE THREAD FOR ANSWERS. WHEN YOU'RE ABSOLUTELY SURE NO ONE HAS ASKED YOUR QUESTION, GO AHEAD AND RE-READ THE THREAD AGAIN AND USE THE SEARCH FEATURE. THEN POST YOUR QUESTION IF YOU STILL CAN'T FIND THE ANSWER **
** WHEN MOVING FROM AMAZON OS TO CM10.1 IN TWRP: "WIPE" -> "SYSTEM" AND "FACTORY RESET" TO CLEAR SYSTEM/DATA/CACHE. YOUR APPS FROM AMAZON ICS AREN'T COMPATIBLE. IF NOT YOU'LL LOOP ON THE CM10.1 BOOT ANIMATION **
[03/27] NEW support thread for OFFICIAL CM on the Otter2 (Kindle Fire 2):
** YOU SHOULD HAVE A WORKING FASTBOOT CABLE + FASTBOOT DRIVERS/ACCESS ON YOUR PC. **
How do I know if my fastboot works?
Plug the cable into your device and then the computer. Reboot the Kindle. It *SHOULD* show a Fastboot screen. Once at the screen use this command on your computer:
fastboot -i 0x1949 devices
You should see something like this:
Here's 1 website you can purchase a FASTBOOT adapter from (works with your normal USB cable)
** I don't make any commission or fee from the sales of these devices, I just know they have them on stock most of the time and ship in a reasonable time frame unlike the Chinese variants found on ebay.
If you do NOT see this, then make sure you have the SDK installed correctly and you have the right setup for fastboot on your PC before proceeding.
*** BE SURE YOU HAVE A GOOD CHARGE ON THE DEVICE ***
INITIAL SETUP INSTRUCTIONS (1st TIME ONLY) FOR 2ND-BOOTLOADER + TeamWinRecoveryProject INSTALL:
STEP 1. Backup your stock partitions to your own HD for later if you need disaster recovery:
Take those files and put them somewhere safe.
STEP 2: Download the files you will need to install 2nd-bootloader, TWRP and CM10.1:
adb pull /dev/block/mmcblk0boot0
adb pull /dev/block/platform/omap/omap_hsmmc.1/by-name/boot
adb pull /dev/block/platform/omap/omap_hsmmc.1/by-name/recovery
adb pull /dev/block/platform/omap/omap_hsmmc.1/by-name/system # This will take a few minutes
Place the ROM and the gapps .zip on your device in the /sdcard area
STEP 3. Install the stack override in /system:
ADB commands entered while booted up into STOCK *rooted* Amazon Kindle OS -- May need to enable ADB debugging in Settings:
- Stack override file:
- [12/09] otter2-freedom-boot-10.4.6.img (USED ONLY THE FIRST TIME -- .zip files will have their own boot.img's from now on):
- [09/03] TeamWin Recovery 220.127.116.11:
- older 10.2.4 bootloader file and flash to your device via fastboot:
(You SHOULD check the MD5SUM before using fastboot -- downloads CAN be corrupted)
- CM-10.1/CM-10.2 for the Kindle Fire 2 (choose the latest version from):
- Google Apps from: http://goo.im/gapps (choose the version: CM10.1 or CM10.2)
[2013-08-21] edited the location where stack is placed on device due to permissions changes
[ Connect fastboot cable, and reboot the device so that "Fastboot" is showing ]
adb push stack /sdcard/
adb shell su -c "dd if=/sdcard/stack of=/dev/block/platform/omap/omap_hsmmc.1/by-name/system bs=6519488 seek=1"
Flash the OLD bootloader, new otter2-freedom-boot.img and TWRP recovery.[/B]
*DONT RE-FLASH FREEDOM-BOOT.IMG LATER AFTER FLASHING CM10.1 -- IT'S FOR STOCK AMAZON OS ONLY / FIRST INSTALL ONLY*
** If everything was done correctly you will at this point see the bootmenu with a BLUE logo during the reboot. **
TO ENTER RECOVERY:
fastboot -i 0x1949 flash bootloader otter2-u-boot-prod-10.2.4.bin
fastboot -i 0x1949 flash boot otter2-freedom-boot-10.4.6.img
fastboot -i 0x1949 flash recovery otter2-twrp-18.104.22.168-recovery.img
fastboot -i 0x1949 reboot
During the blue logo screen press the power button to cycle through options and select "Recovery" to enter TWRP.
Once in TWRP you can Install" the CM-10.1/CM-10.2 by selecting "Install" and then browsing the device and selecting it, then "Add Zip" and select the Gapps .zip as well.
Use the slider to start the install.
FLASHING BACK TO STOCK:
** FIND THE FILES WE BACKED UP IN STEP #1 OR DOWNLOAD NEW ONES FROM THE RECOVERY THREAD HERE: **
Once you have these files (we'll name them boot.img/recovery.img and system.img for the purpose of these instructions, but they could be different on your system
Plug in your fastboot cable and reboot so that you see the fastboot screen and enter the following commands:
fastboot -i 0x1949 flash boot boot.img
fastboot -i 0x1949 flash recovery recovery.img
fastboot -i 0x1949 flash system system.img # This one will take a few minutes
fastboot -i 0x1949 reboot
- fattire for finding the original bootloader exploit
- TESTERS: powerpoint45 and FMKilo