Project Ara Smartphone Will Run Modified Android L with Hot Swapping

Project Ara is a very exciting topic–both for hardware and … more

Streamline Android Theme Customization with Graphic Porter

I dont have a custom theme on my Android phone, and the reason for this is because … more

Boost the Brightness of Your Sony Xperia Z1’s LED

I think the last time anyone has ever used a physical torch to find their earphones, … more

XDA Xposed Tuesday: Modify the Look of Your Volume Control – XDA TV

How many screenshots have you seen with a volume status bar in the … more
Post Reply

Screen Protectors and Cases Don't "like" Eachother

19th January 2013, 05:59 AM   |  #1  
OP Senior Member
Thanks Meter: 8
 
192 posts
Join Date:Joined: May 2011
I've tried a couple of different screen protectors, and three different cases, and I have the same problem every time.

The edges of the case tend to push at the edges of the screen protector, and start to pull it up. You can "fix" it a few times but eventually dust gets in there and then you just have a few bubbles at the side, which are unsightly.

I need cases and screen protectors that agree with eachother... where do I go?
19th January 2013, 06:46 PM   |  #2  
Senior Member
Thanks Meter: 209
 
1,190 posts
Join Date:Joined: Oct 2008
Donate to Me
More
I had the realook on my last phone, which is more like a "glass" material than rubber/flexible, it might fix your issue since it will be less likely to bend and fold.

http://www.amazon.com/s/ref=bl_sr_el...ok&node=172282
23rd January 2013, 08:30 PM   |  #3  
vpetkar's Avatar
Senior Member
Flag Mississauga, ON
Thanks Meter: 45
 
151 posts
Join Date:Joined: Dec 2012
Donate to Me
More
Re: Screen Protectors and Cases Don't "like" Eachother
OK here's a revolutionary idea: scissors.

Cut the screen protector 3mm and stick it on. Don't complicate things!

Sent from my Optimus G using xda app-developers app
The Following User Says Thank You to vpetkar For This Useful Post: [ View ]
23rd January 2013, 09:38 PM   |  #4  
OP Senior Member
Thanks Meter: 8
 
192 posts
Join Date:Joined: May 2011
Re: Screen Protectors and Cases Don't "like" Eachother
Quote:
Originally Posted by vpetkar

OK here's a revolutionary idea: scissors.

Cut the screen protector 3mm and stick it on. Don't complicate things!

Sent from my Optimus G using xda app-developers app

Has this worked for you or are you just assuming? I find it very unlikely that scissors wouldn't warp the edge slightly, stopping it from going on cleanly.

A razor blade MIGHT do it, but I doubt that too. The problem is (and it applies to scissors too) is that you're cutting three layers including the two that you pull off just prior to application. It's impossible to perfectly cut through all that with household items.

It's easier without those layers, sure, but try cutting it after taking those layers off. You'll get dust or a fingerprint or some other imperfection on the sticky side, leading to a bubble underneath that you'll never get rid of. It is hard enough to avoid errant dust even when applying it 5 seconds after taking the protective layer off. 1-2 bubbles is par for the course.

So no, I wouldn't say this is very revolutionary.

Sent from my LG-E971 using xda app-developers app
24th January 2013, 02:15 PM   |  #5  
gabby131's Avatar
Senior Member
Flag Winnipeg, MB Canada
Thanks Meter: 127
 
918 posts
Join Date:Joined: Sep 2010
More
Hi!

I understand your need for extra protection but I do have a few options for you:

- Otter box (if available, and it should be) always include a screen protector on their cases. Yes it is bulky, but you have so much armor.

- Full protection Zagg shield. This is a screen film that is fully flexible, and robust to the extent that it's almost indestructible! Zagg offers these kind of films on screen, back, and sides (Max protection option). So it's like applying a plastic cover all over the phone.

Hope this gives you a hint.
Last edited by gabby131; 24th January 2013 at 02:19 PM.
24th January 2013, 02:40 PM   |  #6  
Senior Member
Thanks Meter: 209
 
1,190 posts
Join Date:Joined: Oct 2008
Donate to Me
More
IMHO, zagg shield is realy "rubbery", not a pleasant feel at all...
24th January 2013, 02:58 PM   |  #7  
gabby131's Avatar
Senior Member
Flag Winnipeg, MB Canada
Thanks Meter: 127
 
918 posts
Join Date:Joined: Sep 2010
More
Quote:
Originally Posted by t1mman

IMHO, zagg shield is realy "rubbery", not a pleasant feel at all...

Yes, that's the word I was looking for to describe it.
24th January 2013, 06:18 PM   |  #8  
gsrrr's Avatar
Senior Member
Thanks Meter: 197
 
519 posts
Join Date:Joined: Apr 2011
More
Quote:
Originally Posted by t1mman

I had the realook on my last phone, which is more like a "glass" material than rubber/flexible, it might fix your issue since it will be less likely to bend and fold.

http://www.amazon.com/s/ref=bl_sr_el...ok&node=172282

I have the Realook on my E970 and the diztronic case and it pushes up on the corners of the screen protector.
13th February 2013, 08:03 AM   |  #9  
Junior Member
Thanks Meter: 0
 
2 posts
Join Date:Joined: Feb 2013
More
I use the OEM Flip folio case with a Zagg Invisible Shield HD and have had no problems.
14th February 2013, 12:55 AM   |  #10  
Senior Member
Thanks Meter: 39
 
132 posts
Join Date:Joined: Jan 2011
really tight cases (TPU, polycarbonate) tend to cause screen protector to lift on the edges, one way to get around that is to get a silicone or silicone/polycarbonate hybrid (think otterbox) case.

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Optimus G Accessories by ThreadRank