Thread Closed

[ROM][4.2.2][AOKP/CM/PA] Official Vanilla RootBox [04/02][v3.9.1][Per-App-DPI][PIE]

OP ManelScout4Life

23rd February 2013, 08:52 PM   |  #941  
scar45's Avatar
Recognized Themer
Flag 127.0.0.1
Thanks Meter: 1,018
 
963 posts
Join Date:Joined: Aug 2006
Donate to Me
More
Without using BT, I've had 2 hot reboots within 24 hours (flashed 0222 yesterday). Note that I am NOT complaining or whatever, but simply bringing the point forward. I know other devices running RootBox had some hot reboot issues, but since Bajee did not announce any fixes, I'm just going to wait patiently. FWIW, after the hot reboot occurs, if I check a Task Manager, I see that '/system/bin/gsiff_daemon' is spiking the CPU.

Also, further to the point that I am not trying to bitch and whine (I want to help ensure this ROM is 'hot-boot-free'), here's an excerpt from the last_kmsg that occurred when the hot reboot happened:

Code:
<6>[14358.755607] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.773139] c3 lcd panel: s6evr02_check_fb, fb2
<0>[14358.784372] c0 (sec_debug_set_upload_magic) 0
<6>[14358.784607] c0 graphics fb0: lcdfreq_reboot_notify
<6>[14358.784667] c0 REBOOT Notifier for CPUFREQ
<6>[14358.784714] c0 REBOOT Notifier for BUSFREQ
<6>[14358.784911] c0 s5p-ohci s5p-ohci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14358.784978] c0 s5p-ohci s5p-ohci: shutdown -
<6>[14358.785022] c0 s5p-ehci s5p-ehci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14358.785568] c0 s5p-ehci s5p-ehci: shutdown -
<6>[14358.785636] c0 dummy 2-0057: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14358.785670] c0 dummy 2-0057: shutdown -
<6>[14358.786039] c0 ssp 1-0018: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14358.786074] c0 [SSP]: ssp_shutdown
<6>[14358.786105] c0 wake disabled for irq 352
<6>[14358.790093] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.807010] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.824223] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.842105] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.858852] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.875878] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.892955] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.910521] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.927461] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.944670] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.961933] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.979119] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.995946] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.013075] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.030465] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.047969] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.049466] c1 ssp_senosrhub_thread_func: kthread_stop()
<6>[14359.049510] c1 ssp_senosrhub_thread_func: exit
<6>[14359.064839] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.081822] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.099117] c3 lcd panel: s6evr02_check_fb, fb2
<3>[14359.101232] c0 [SSP]: toggle_mcu_reset - ssp_Normal Mode
<6>[14359.101258] c0 ssp 1-0018: shutdown -
<6>[14359.101286] c0 pn65n 12-002b: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101313] c0 pn65n 12-002b: shutdown -
<6>[14359.101333] c0 s5p_ddc 5-003a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101362] c0 s5p_ddc 5-003a: shutdown -
<6>[14359.101383] c0 sii9234_cbus 15-0064: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101412] c0 sii9234_cbus 15-0064: shutdown -
<6>[14359.101433] c0 sii9234_hdmi_rx 15-0049: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101462] c0 sii9234_hdmi_rx 15-0049: shutdown -
<6>[14359.101484] c0 sii9234_tpi 15-003d: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101511] c0 sii9234_tpi 15-003d: shutdown -
<6>[14359.101532] c0 sii9234_mhl_tx 15-0039: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101562] c0 sii9234_mhl_tx 15-0039: shutdown -
<6>[14359.101662] c0 i2c 5-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101688] c0 i2c 5-0009: shutdown -
<6>[14359.101707] c0 i2c i2c-5: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101731] c0 i2c i2c-5: shutdown -
<6>[14359.101753] c0 max77686-rtc max77686-rtc: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.101786] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr: disable WTSR
<6>[14359.116351] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.133381] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.150591] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.168446] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.174468] c0 max77686_rtc_shutdown: WTSR_SMPL reg(0x80)
<6>[14359.174493] c0 max77686_rtc_shutdown: success to disable WTSR
<6>[14359.174520] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_smpl: disable SMPL
<6>[14359.185152] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.202169] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.219367] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.224208] c0 max77686-rtc max77686-rtc: shutdown -
<6>[14359.224260] c0 dummy 7-0006: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224285] c0 dummy 7-0006: shutdown -
<6>[14359.224304] c0 max77686 7-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224330] c0 max77686 7-0009: shutdown -
<6>[14359.224350] c0 i2c i2c-7: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224374] c0 i2c i2c-7: shutdown -
<6>[14359.224391] c0 wm8994 4-001a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224417] c0 wm8994 4-001a: shutdown -
<6>[14359.224435] c0 i2c i2c-4: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224459] c0 i2c i2c-4: shutdown -
<6>[14359.224477] c0 melfas-ts 3-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224503] c0 melfas-ts 3-0048: shutdown -
<6>[14359.224523] c0 i2c i2c-3: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224547] c0 i2c i2c-3: shutdown -
<6>[14359.224565] c0 wacom_g5sp_i2c 2-0056: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224592] c0 wacom_g5sp_i2c 2-0056: shutdown -
<6>[14359.224612] c0 i2c i2c-2: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224636] c0 i2c i2c-2: shutdown -
<6>[14359.224653] c0 i2c i2c-1: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224677] c0 i2c i2c-1: shutdown -
<6>[14359.224695] c0 i2c i2c-0: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224718] c0 i2c i2c-0: shutdown -
<6>[14359.224736] c0 i2c i2c-12: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224760] c0 i2c i2c-12: shutdown -
<6>[14359.224779] c0 ice4 22-006c: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224803] c0 ice4 22-006c: shutdown -
<6>[14359.224823] c0 i2c i2c-22: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224848] c0 i2c i2c-22: shutdown -
<6>[14359.224866] c0 an30259a 21-0030: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224892] c0 an30259a 21-0030: shutdown -
<6>[14359.224911] c0 i2c i2c-21: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224936] c0 i2c i2c-21: shutdown -
<6>[14359.224961] c0 max77693-muic max77693-muic: shutdown +: max77693_muic_shutdown+0x0/0x98
<6>[14359.224992] c0 max77693-muic max77693-muic: func:max77693_muic_shutdown
<6>[14359.225018] c0 max77693-muic max77693-muic: max77693_muic_shutdown: JIGSet: auto detection
<6>[14359.225900] c0 max77693-muic max77693-muic: shutdown -
<6>[14359.225931] c0 max77693-led max77693-led: shutdown +: max77693_led_shutdown+0x0/0x2c
<6>[14359.226913] c0 max77693-led max77693-led: shutdown -
<6>[14359.226959] c0 dummy 17-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.226991] c0 dummy 17-0048: shutdown -
<6>[14359.227015] c0 dummy 17-0025: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227045] c0 dummy 17-0025: shutdown -
<6>[14359.227069] c0 max77693 17-0066: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227100] c0 max77693 17-0066: shutdown -
<6>[14359.227125] c0 i2c i2c-17: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227154] c0 i2c i2c-17: shutdown -
<6>[14359.227177] c0 i2c i2c-15: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227207] c0 i2c i2c-15: shutdown -
<6>[14359.227230] c0 max17047-fuelgauge 14-0036: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227265] c0 max17047-fuelgauge 14-0036: shutdown -
<6>[14359.227294] c0 i2c i2c-14: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227324] c0 i2c i2c-14: shutdown -
<6>[14359.227346] c0 sec_touchkey_driver 8-0020: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227381] c0 sec_touchkey_driver 8-0020: shutdown -
<6>[14359.227409] c0 i2c i2c-8: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227438] c0 i2c i2c-8: shutdown -
<6>[14359.227529] c0 s3c-sdhci s3c-sdhci.3: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.227573] c0 s3c-sdhci s3c-sdhci.3: shutdown -
<6>[14359.227602] c0 s3c-sdhci s3c-sdhci.2: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228261] c0 sdhci_shutdown_host : MMC Card OFF
<6>[14359.228285] c0 s3c-sdhci s3c-sdhci.2: shutdown -
<6>[14359.228334] c0 s3c2410-wdt s3c2410-wdt: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228370] c0 s3c2410-wdt s3c2410-wdt: shutdown -
<6>[14359.228404] c0 mdnie mdnie: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228434] c0 mdnie mdnie: shutdown -
<4>[14359.228527] c0 Disabling non-boot CPUs ...
<5>[14359.236477] c0 CPU1: shutdown
<6>[14359.236641] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.254283] c3 lcd panel: s6evr02_check_fb, fb2
<5>[14359.255124] c0 CPU2: shutdown
<5>[14359.264575] c0 CPU3: shutdown
<0>[14359.269453] c0 Restarting system with command ''.
<0>[14359.269477] c0 pid = 626 name:Thread-154
<0>[14359.269515] c0 sec_reboot (104, )
PMIC rev = PASS2(4)
mmc_initialize: mmc->capacity = 30777344

Samsung S-Boot 4.0-262790 for SGH-I317M_NA_BMC (Oct  3 2012 - 09:55:09)

EXYNOS4412(EVT 2.0) / 2047MB / 15028MB / Rev 10 / I317MVLALJ2

initialize_ddi_data: usable! (4:0xe)
PARAM ENV VERSION: v1.0..
<start_checksum:331>CHECKSUM_HEADER_SECTOR :4096
<start_checksum:333>offset:50, size:6296
<start_checksum:336>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:20
Not Need Movinand Checksum
Movinand Checksum Confirmation Pass
init_fuelgauge: fuelgauge power ok
init_fuelgauge: not POR status
init_fuelgauge: is reset case, skip soc-cal.
get_table_soc: vcell(4043) is caculated to t-soc(79.141)
init_fuelgauge: start: vcell(4043), vfocv(4126), soc(83), table soc(79)
init_fuelgauge: finish: vcell(4043), vfocv(4126), soc(83), table soc(79)
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3b
PMIC_ID      = 0x02 
PMIC_IRQSRC  = 0x00 
PMIC_STATUS1 = 0x12 
PMIC_STATUS2 = 0x00 
PMIC_PWRON   = 0x09 
PMIC_IRQ1    = 0x03 
PMIC_IRQ2    = 0x00 
s5p_check_keypad: 0x0
s5p_check_reboot_mode: INFORM3 = 12345670 ... skip
board_check_cp_mdm9x_type : 0
s5p_check_upload: MAGIC(0x0), RST_STAT(0x20000000)
s5p_check_download: 0
microusb_get_attached_device: STATUS1:0x3f, 2:0x00
check_pm_status: normal reset, do not enter LPM mode.
ddi type = 1, S.LSI
cmu_div:6, div:2, src_clk:880000000, pixel_clk:62614944
41, 16, a2, 
load_kernel: loading boot image from 106496..
- read_bl1
Verify_Binary_Signature: failed.
pit_check_signature (BOOT) invalid.
Set invalid sign flag
if_ddi_data: succeeded. (4:0xe)
ATAG_CORE: 5 54410001 0 0 0
ATAG_MEM: 4 54410002 20000000 40000000
ATAG_MEM: 4 54410002 20000000 60000000
ATAG_MEM: 4 54410002 20000000 80000000
ATAG_MEM: 4 54410002 1ff00000 a0000000
ATAG_SERIAL: 4 54410006 42f76001 f7c79f0f
ATAG_INITRD2: 4 54420005 42000000 4450a
ATAG_REVISION: 3 54410007 a
ATAG_CMDLINE: 6f 54410009 'console=ram loglevel=4 androidboot.baseband=mdm sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=1 consoleblank=0 lpcharge=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=65 cordon=9770d737b3f8fb7668fba130b673814b androidboot.emmc_checksum=3 androidboot.bootloader=I317MVLALJ2 androidboot.serialno=42f76001f7c79f0f snd_soc_core.pmdown_time=1000'
ATAG_NONE: 0 0

Starting kernel at 0x40008000...

SWITCH_SEL(1)
You'll notice that at the beginning, "<6>[14358.784667] c0 REBOOT Notifier for CPUFREQ //// <6>[14358.784714] c0 REBOOT Notifier for BUSFREQ" is shown, as I was OC'ing to 1920mhz, but I've lowered it since. What's also a bit strange is that when set to 1920mhz, SetCPU reports that the device runs at 1900mhz. I know it's a new kernel, so again, just wanted to report my findings.

To end, THANK YOU JOHN AND BAJEE!!! I know I've brought up some issues, but I always do my best to provide whatever info I can rather than just blindly complain. I know this thread is aimed towards Development of RootBox, and I'm hoping that I am able to help provide decent debugging info at the least
The Following 3 Users Say Thank You to scar45 For This Useful Post: [ View ]
23rd February 2013, 08:57 PM   |  #942  
Senior Member
Flag CA
Thanks Meter: 546
 
3,081 posts
Join Date:Joined: Feb 2011
More
^ If you are getting reboots due to OC'n an unstable clock, have you checked to see if you are getting hot reboots while running stock clocks?
Last edited by RMXO; 23rd February 2013 at 09:25 PM.
23rd February 2013, 09:11 PM   |  #943  
OP Account currently disabled
Flag Newark, NJ
Thanks Meter: 5,476
 
2,571 posts
Join Date:Joined: Oct 2006
Donate to Me
Quote:
Originally Posted by scar45

Without using BT, I've had 2 hot reboots within 24 hours (flashed 0222 yesterday). Note that I am NOT complaining or whatever, but simply bringing the point forward. I know other devices running RootBox had some hot reboot issues, but since Bajee did not announce any fixes, I'm just going to wait patiently. FWIW, after the hot reboot occurs, if I check a Task Manager, I see that '/system/bin/gsiff_daemon' is spiking the CPU.

Also, further to the point that I am not trying to bitch and whine (I want to help ensure this ROM is 'hot-boot-free'), here's an excerpt from the last_kmsg that occurred when the hot reboot happened:

Code:
<6>[14358.755607] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.773139] c3 lcd panel: s6evr02_check_fb, fb2
<0>[14358.784372] c0 (sec_debug_set_upload_magic) 0
<6>[14358.784607] c0 graphics fb0: lcdfreq_reboot_notify
<6>[14358.784667] c0 REBOOT Notifier for CPUFREQ
<6>[14358.784714] c0 REBOOT Notifier for BUSFREQ
<6>[14358.784911] c0 s5p-ohci s5p-ohci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14358.784978] c0 s5p-ohci s5p-ohci: shutdown -
<6>[14358.785022] c0 s5p-ehci s5p-ehci: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14358.785568] c0 s5p-ehci s5p-ehci: shutdown -
<6>[14358.785636] c0 dummy 2-0057: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14358.785670] c0 dummy 2-0057: shutdown -
<6>[14358.786039] c0 ssp 1-0018: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14358.786074] c0 [SSP]: ssp_shutdown
<6>[14358.786105] c0 wake disabled for irq 352
<6>[14358.790093] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.807010] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.824223] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.842105] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.858852] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.875878] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.892955] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.910521] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.927461] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.944670] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.961933] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.979119] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14358.995946] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.013075] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.030465] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.047969] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.049466] c1 ssp_senosrhub_thread_func: kthread_stop()
<6>[14359.049510] c1 ssp_senosrhub_thread_func: exit
<6>[14359.064839] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.081822] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.099117] c3 lcd panel: s6evr02_check_fb, fb2
<3>[14359.101232] c0 [SSP]: toggle_mcu_reset - ssp_Normal Mode
<6>[14359.101258] c0 ssp 1-0018: shutdown -
<6>[14359.101286] c0 pn65n 12-002b: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101313] c0 pn65n 12-002b: shutdown -
<6>[14359.101333] c0 s5p_ddc 5-003a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101362] c0 s5p_ddc 5-003a: shutdown -
<6>[14359.101383] c0 sii9234_cbus 15-0064: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101412] c0 sii9234_cbus 15-0064: shutdown -
<6>[14359.101433] c0 sii9234_hdmi_rx 15-0049: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101462] c0 sii9234_hdmi_rx 15-0049: shutdown -
<6>[14359.101484] c0 sii9234_tpi 15-003d: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101511] c0 sii9234_tpi 15-003d: shutdown -
<6>[14359.101532] c0 sii9234_mhl_tx 15-0039: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101562] c0 sii9234_mhl_tx 15-0039: shutdown -
<6>[14359.101662] c0 i2c 5-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101688] c0 i2c 5-0009: shutdown -
<6>[14359.101707] c0 i2c i2c-5: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.101731] c0 i2c i2c-5: shutdown -
<6>[14359.101753] c0 max77686-rtc max77686-rtc: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.101786] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr: disable WTSR
<6>[14359.116351] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.133381] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.150591] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.168446] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.174468] c0 max77686_rtc_shutdown: WTSR_SMPL reg(0x80)
<6>[14359.174493] c0 max77686_rtc_shutdown: success to disable WTSR
<6>[14359.174520] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_smpl: disable SMPL
<6>[14359.185152] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.202169] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.219367] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.224208] c0 max77686-rtc max77686-rtc: shutdown -
<6>[14359.224260] c0 dummy 7-0006: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224285] c0 dummy 7-0006: shutdown -
<6>[14359.224304] c0 max77686 7-0009: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224330] c0 max77686 7-0009: shutdown -
<6>[14359.224350] c0 i2c i2c-7: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224374] c0 i2c i2c-7: shutdown -
<6>[14359.224391] c0 wm8994 4-001a: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224417] c0 wm8994 4-001a: shutdown -
<6>[14359.224435] c0 i2c i2c-4: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224459] c0 i2c i2c-4: shutdown -
<6>[14359.224477] c0 melfas-ts 3-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224503] c0 melfas-ts 3-0048: shutdown -
<6>[14359.224523] c0 i2c i2c-3: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224547] c0 i2c i2c-3: shutdown -
<6>[14359.224565] c0 wacom_g5sp_i2c 2-0056: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224592] c0 wacom_g5sp_i2c 2-0056: shutdown -
<6>[14359.224612] c0 i2c i2c-2: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224636] c0 i2c i2c-2: shutdown -
<6>[14359.224653] c0 i2c i2c-1: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224677] c0 i2c i2c-1: shutdown -
<6>[14359.224695] c0 i2c i2c-0: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224718] c0 i2c i2c-0: shutdown -
<6>[14359.224736] c0 i2c i2c-12: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224760] c0 i2c i2c-12: shutdown -
<6>[14359.224779] c0 ice4 22-006c: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224803] c0 ice4 22-006c: shutdown -
<6>[14359.224823] c0 i2c i2c-22: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224848] c0 i2c i2c-22: shutdown -
<6>[14359.224866] c0 an30259a 21-0030: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224892] c0 an30259a 21-0030: shutdown -
<6>[14359.224911] c0 i2c i2c-21: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.224936] c0 i2c i2c-21: shutdown -
<6>[14359.224961] c0 max77693-muic max77693-muic: shutdown +: max77693_muic_shutdown+0x0/0x98
<6>[14359.224992] c0 max77693-muic max77693-muic: func:max77693_muic_shutdown
<6>[14359.225018] c0 max77693-muic max77693-muic: max77693_muic_shutdown: JIGSet: auto detection
<6>[14359.225900] c0 max77693-muic max77693-muic: shutdown -
<6>[14359.225931] c0 max77693-led max77693-led: shutdown +: max77693_led_shutdown+0x0/0x2c
<6>[14359.226913] c0 max77693-led max77693-led: shutdown -
<6>[14359.226959] c0 dummy 17-0048: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.226991] c0 dummy 17-0048: shutdown -
<6>[14359.227015] c0 dummy 17-0025: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227045] c0 dummy 17-0025: shutdown -
<6>[14359.227069] c0 max77693 17-0066: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227100] c0 max77693 17-0066: shutdown -
<6>[14359.227125] c0 i2c i2c-17: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227154] c0 i2c i2c-17: shutdown -
<6>[14359.227177] c0 i2c i2c-15: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227207] c0 i2c i2c-15: shutdown -
<6>[14359.227230] c0 max17047-fuelgauge 14-0036: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227265] c0 max17047-fuelgauge 14-0036: shutdown -
<6>[14359.227294] c0 i2c i2c-14: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227324] c0 i2c i2c-14: shutdown -
<6>[14359.227346] c0 sec_touchkey_driver 8-0020: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227381] c0 sec_touchkey_driver 8-0020: shutdown -
<6>[14359.227409] c0 i2c i2c-8: shutdown +: i2c_device_shutdown+0x0/0x4c
<6>[14359.227438] c0 i2c i2c-8: shutdown -
<6>[14359.227529] c0 s3c-sdhci s3c-sdhci.3: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.227573] c0 s3c-sdhci s3c-sdhci.3: shutdown -
<6>[14359.227602] c0 s3c-sdhci s3c-sdhci.2: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228261] c0 sdhci_shutdown_host : MMC Card OFF
<6>[14359.228285] c0 s3c-sdhci s3c-sdhci.2: shutdown -
<6>[14359.228334] c0 s3c2410-wdt s3c2410-wdt: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228370] c0 s3c2410-wdt s3c2410-wdt: shutdown -
<6>[14359.228404] c0 mdnie mdnie: shutdown +: platform_drv_shutdown+0x0/0x20
<6>[14359.228434] c0 mdnie mdnie: shutdown -
<4>[14359.228527] c0 Disabling non-boot CPUs ...
<5>[14359.236477] c0 CPU1: shutdown
<6>[14359.236641] c3 lcd panel: s6evr02_check_fb, fb2
<6>[14359.254283] c3 lcd panel: s6evr02_check_fb, fb2
<5>[14359.255124] c0 CPU2: shutdown
<5>[14359.264575] c0 CPU3: shutdown
<0>[14359.269453] c0 Restarting system with command ''.
<0>[14359.269477] c0 pid = 626 name:Thread-154
<0>[14359.269515] c0 sec_reboot (104, )
PMIC rev = PASS2(4)
mmc_initialize: mmc->capacity = 30777344

Samsung S-Boot 4.0-262790 for SGH-I317M_NA_BMC (Oct  3 2012 - 09:55:09)

EXYNOS4412(EVT 2.0) / 2047MB / 15028MB / Rev 10 / I317MVLALJ2

initialize_ddi_data: usable! (4:0xe)
PARAM ENV VERSION: v1.0..
<start_checksum:331>CHECKSUM_HEADER_SECTOR :4096
<start_checksum:333>offset:50, size:6296
<start_checksum:336>CHECKSUM_HEADER_INFO : NeedChecksum:0 PartNo:20
Not Need Movinand Checksum
Movinand Checksum Confirmation Pass
init_fuelgauge: fuelgauge power ok
init_fuelgauge: not POR status
init_fuelgauge: is reset case, skip soc-cal.
get_table_soc: vcell(4043) is caculated to t-soc(79.141)
init_fuelgauge: start: vcell(4043), vfocv(4126), soc(83), table soc(79)
init_fuelgauge: finish: vcell(4043), vfocv(4126), soc(83), table soc(79)
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL1:0x00
init_microusb_ic: MUIC: CONTROL2:0x3b
init_microusb_ic: MUIC: CONTROL2:0x3b
PMIC_ID      = 0x02 
PMIC_IRQSRC  = 0x00 
PMIC_STATUS1 = 0x12 
PMIC_STATUS2 = 0x00 
PMIC_PWRON   = 0x09 
PMIC_IRQ1    = 0x03 
PMIC_IRQ2    = 0x00 
s5p_check_keypad: 0x0
s5p_check_reboot_mode: INFORM3 = 12345670 ... skip
board_check_cp_mdm9x_type : 0
s5p_check_upload: MAGIC(0x0), RST_STAT(0x20000000)
s5p_check_download: 0
microusb_get_attached_device: STATUS1:0x3f, 2:0x00
check_pm_status: normal reset, do not enter LPM mode.
ddi type = 1, S.LSI
cmu_div:6, div:2, src_clk:880000000, pixel_clk:62614944
41, 16, a2, 
load_kernel: loading boot image from 106496..
- read_bl1
Verify_Binary_Signature: failed.
pit_check_signature (BOOT) invalid.
Set invalid sign flag
if_ddi_data: succeeded. (4:0xe)
ATAG_CORE: 5 54410001 0 0 0
ATAG_MEM: 4 54410002 20000000 40000000
ATAG_MEM: 4 54410002 20000000 60000000
ATAG_MEM: 4 54410002 20000000 80000000
ATAG_MEM: 4 54410002 1ff00000 a0000000
ATAG_SERIAL: 4 54410006 42f76001 f7c79f0f
ATAG_INITRD2: 4 54420005 42000000 4450a
ATAG_REVISION: 3 54410007 a
ATAG_CMDLINE: 6f 54410009 'console=ram loglevel=4 androidboot.baseband=mdm sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x200000@0x46000000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=1 consoleblank=0 lpcharge=0 lpj=3981312 vmalloc=176m oops=panic pmic_info=65 cordon=9770d737b3f8fb7668fba130b673814b androidboot.emmc_checksum=3 androidboot.bootloader=I317MVLALJ2 androidboot.serialno=42f76001f7c79f0f snd_soc_core.pmdown_time=1000'
ATAG_NONE: 0 0

Starting kernel at 0x40008000...

SWITCH_SEL(1)
You'll notice that at the beginning, "<6>[14358.784667] c0 REBOOT Notifier for CPUFREQ //// <6>[14358.784714] c0 REBOOT Notifier for BUSFREQ" is shown, as I was OC'ing to 1920mhz, but I've lowered it since. What's also a bit strange is that when set to 1920mhz, SetCPU reports that the device runs at 1900mhz. I know it's a new kernel, so again, just wanted to report my findings.

To end, THANK YOU JOHN AND BAJEE!!! I know I've brought up some issues, but I always do my best to provide whatever info I can rather than just blindly complain. I know this thread is aimed towards Development of RootBox, and I'm hoping that I am able to help provide decent debugging info at the least

This is exactly what posts in here should look like. Much appreciated!
The Following 4 Users Say Thank You to ManelScout4Life For This Useful Post: [ View ]
24th February 2013, 12:49 AM   |  #944  
scar45's Avatar
Recognized Themer
Flag 127.0.0.1
Thanks Meter: 1,018
 
963 posts
Join Date:Joined: Aug 2006
Donate to Me
More
Quote:
Originally Posted by RMXO

^ If you are getting reboots due to OC'n an unstable clock, have you checked to see if you are getting hot reboots while running stock clocks?

I did say that while I was OC'ed, I was going to lower the clock, when I should have just said I was going back to stock speed. I've done so, however lowering back to 1600mhz in SetCPU would not change the 'live' clock rate until I rebooted (few hours ago). Just now, I experienced another hot reboot while I was tinkering around in Tasker (i.e. they still appear to be random, as I have not been able to reproduce it). I had also already performed a full-wipe for the 0222 nightly.

The reboot above happened at 1600mhz, with the default scheduler (row)/governor (pegasusq). I then checked the 'last_kmsg' which had an updated(/current) timestamp, however it showed the same exact trace, so no need to post it again. Again, I know it's a new kernel, so just trying to report on that, but I don't quite feel that the hot restart issues are related to the kernel/clock rates (users reported hot restarts with the Bullet kernel a few versions back).
24th February 2013, 06:13 AM   |  #945  
ArtificialMusik's Avatar
Senior Member
Flag Queen Creek, AZ
Thanks Meter: 75
 
354 posts
Join Date:Joined: Jul 2011
Donate to Me
More
Re: [ROM][4.2.2][AOKP/CM] Official Vanilla RootBox [02/22][v3.7.1][Per-App-DPI][PIE]
I want to help figure out what my issue is with this ROM. There is a countless number of times where I simply lose service on my phone and it just floats right back eventually. Its very frustrating and I had the problem a little bit on CleanROM but not much. I'm thinking I might need to get a warranty replacement as its a factory defect. But I want to be sure. How can I log this to share with you what issue I might be having?

Sent from my GT-N7105 using Tapatalk 2
24th February 2013, 06:58 AM   |  #946  
OP Account currently disabled
Flag Newark, NJ
Thanks Meter: 5,476
 
2,571 posts
Join Date:Joined: Oct 2006
Donate to Me
Quote:
Originally Posted by ArtificialMusik

I want to help figure out what my issue is with this ROM. There is a countless number of times where I simply lose service on my phone and it just floats right back eventually. Its very frustrating and I had the problem a little bit on CleanROM but not much. I'm thinking I might need to get a warranty replacement as its a factory defect. But I want to be sure. How can I log this to share with you what issue I might be having?

Sent from my GT-N7105 using Tapatalk 2

If it's happening on stock based ROMs too then it's sounding like a hardware issue.
24th February 2013, 07:50 AM   |  #947  
Senior Member
Thanks Meter: 26
 
171 posts
Join Date:Joined: Jul 2009
Re: [ROM][4.2.2][AOKP/CM] Official Vanilla RootBox [02/22][v3.7.1][Per-App-DPI][PIE]
I had a few hot reboots on the stock TW before I flashed to cm and later rootbox. I still see them occasionally on rootbox, but just brush it off as a minor convenience (thankfully I haven't had a reboot while on an important call).

Even so, I wouldn't jump to the conclusion that hot reboots are a hardware issue... From the logs I have seen (e.g. above), something in software (although possibly triggered by hardware component's firmware) still looks responsible.
24th February 2013, 07:51 AM   |  #948  
bajee11's Avatar
Recognized Contributor / Recognized Developer
Flag Montreal
Thanks Meter: 14,957
 
4,404 posts
Join Date:Joined: Mar 2012
Donate to Me
More

* See Through Lockscreen

* Expanded Desktop - No more StatusBar in Lockscreen


The Following 11 Users Say Thank You to bajee11 For This Useful Post: [ View ]
24th February 2013, 02:36 PM   |  #949  
wuelfman's Avatar
Senior Member
Thanks Meter: 27
 
104 posts
Join Date:Joined: Feb 2012
soo nice
been waiting for the status bar to be out of the lock screen
24th February 2013, 03:21 PM   |  #950  
scar45's Avatar
Recognized Themer
Flag 127.0.0.1
Thanks Meter: 1,018
 
963 posts
Join Date:Joined: Aug 2006
Donate to Me
More
Quote:
Originally Posted by wuelfman

soo nice
been waiting for the status bar to be out of the lock screen

+1, as this is the only other PA feature that I had missed. Thx Bajee!

Thread Closed Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in AT&T Galaxy Note II Android Development by ThreadRank