[Q] HELP...about to toss my note out the F***ING window

---

I have an N8000, it came with China software 4.0.4.

I have been trying and trying and trying to flash the Nordic Rom. 4.1.2

No matter what i do, odin fails to flash

i have tried:

Clear data/cache multiple times
installed kies
installed drivers
odin 1.85, odin 1,87, odin 3.07

after numerous fails, i tried rooting with chainfires auto-root

auto root took just fine, so i know odin/my pc can talk to the tab

i have tried debugging on/debugging off

i have since unrooted using SU built in function, and still to no avail

odin window shows the following (odin 3.07)

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCMA2_N8000OXXCMA1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/003> Added!!


if i dont get this thing off the **** chinese software im going to lose my mind

i am due to fly tomorrow and need to have this setup...can anyone help?

[QUOTE=ninjamunky;38243278]I have an N8000, it came with China software 4.0.4.


Usual question on same old posts .
Is it a genuine Samsung Note 10.1 or a fake/ clone .

ID:0/004> Can't open the serial(COM) port.
reads as possible bad connection wrong cable Kies running not using a motherboard port all the usual fail connect answers

jje

Originally Posted by ninjamunky

I have an N8000, it came with China software 4.0.4.

I have been trying and trying and trying to flash the Nordic Rom. 4.1.2

No matter what i do, odin fails to flash

i have tried:

Clear data/cache multiple times
installed kies
installed drivers
odin 1.85, odin 1,87, odin 3.07

after numerous fails, i tried rooting with chainfires auto-root

auto root took just fine, so i know odin/my pc can talk to the tab

i have tried debugging on/debugging off

i have since unrooted using SU built in function, and still to no avail

odin window shows the following (odin 3.07)

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCMA2_N8000OXXCMA1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/003> Added!!


if i dont get this thing off the **** chinese software im going to lose my mind

i am due to fly tomorrow and need to have this setup...can anyone help?

Calm down.............

1 - Are you saying it is from China or had the China 4.0.4 ROM installed?

2 - Why do you want Nordic Rom. 4.1.2 ?

3 - Can you change the language in the "Chinese software" Because there is a Chinese 4.1.2 firmware that you maybe able to install and change it to english.

.

Originally Posted by kkretch

Calm down.............

1 - Are you saying it is from China or had the China 4.0.4 ROM installed?

2 - Why do you want Nordic Rom. 4.1.2 ?

3 - Can you change the language in the "Chinese software" Because there is a Chinese 4.1.2 firmware that you maybe able to install and change it to english.

.

Update:

first, yes its the real deal and not a clone

N8000 model, was loaded with china rom 4.0.4

since last post, i was able to use kies to update to chinese jellybean

i am still not able to update to a different country rom(i am currently pulling UK rom from sammobile)

latest error code:

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCMA2_N8000OXXCMA1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)




I dont want the chinese rom as i have no interest in QQ, its horribly written services, or government spyware.

i am about to head back to the states and would like access to my google services(which are not installed in the chinese rom)

i buy alot of electronics over here for use at home as some things just aren't available back home(unlocked devices)

i have used this same pc to flash on my P7500, GS2, and even was able to use odin to root earlier(which i haev undone)

i killed kies and all its services

still cant flash a different countries firmware, or at least the one i have, so i am downloading a different one.

the device has been able to update via kies, register, etc

i know the usb is a direct solder to my motherboard, not a daughter board, i have tried 2 ports

its the cable that was in the box(all accessories appear to be genuine), i have also tried my P7500 cable, and my spare charging cable...nothing is working


would i have better luck with mobile odin?

any help...im measuring my departure time in hours at this point

Originally Posted by ninjamunky

Update:

first, yes its the real deal and not a clone

N8000 model, was loaded with china rom 4.0.4

since last post, i was able to use kies to update to chinese jellybean

i am still not able to update to a different country rom(i am currently pulling UK rom from sammobile)

latest error code:

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8000XXCMA2_N8000OXXCMA1_N8000XXCLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)




I dont want the chinese rom as i have no interest in QQ, its horribly written services, or government spyware.

i am about to head back to the states and would like access to my google services(which are not installed in the chinese rom)

i buy alot of electronics over here for use at home as some things just aren't available back home(unlocked devices)

i have used this same pc to flash on my P7500, GS2, and even was able to use odin to root earlier(which i haev undone)

i killed kies and all its services

still cant flash a different countries firmware, or at least the one i have, so i am downloading a different one.

the device has been able to update via kies, register, etc

i know the usb is a direct solder to my motherboard, not a daughter board, i have tried 2 ports

its the cable that was in the box(all accessories appear to be genuine), i have also tried my P7500 cable, and my spare charging cable...nothing is working


would i have better luck with mobile odin?

any help...im measuring my departure time in hours at this point

btw:

Current Firmware
4.1.2
Baseband N8000ZCCMB1
Build JZO54K.N8000ZCCMB1

trying to flash
Sammobile N8000XXCMA2_N8000OXXCMA1_N8000XXCLL1_HOME.tar.md5

downloading
Sammobile N8000XXCMA2_N8000OXXCMA1_BTU.zip

[QUOTE=ninjamunky;38251429]Update:


I would try mobile odin

jje

thanks, ill give it a go, i appreciate someone responding to my call :P

if anyone thinks of any other advice also happy to hear it

not as familiar with mobile odin, same firmware files or will i download a new one through mobile odin?

Re: [Q] HELP...about to toss my note out the F***ING window

---

Give me ur address and I can wait outside that window.



Sent from my GT-N8010 using Tapatalk 2

Originally Posted by aalupatti

Give me ur address and I can wait outside that window.



Sent from my GT-N8010 using Tapatalk 2

well played...id probably do the same if i weren;t so frustrated at the moment lol

well between these helpful forum members...and of course the "geek god" chainfire...there will not be any flying tablets in suzhou tonight


thanks all