Welcome to XDA

Search to go directly to your device's forum

Register an account

Unlock full posting privileges

Ask a question

No registration required
Post Reply

MMS and 3G boost flashed problem

OP nigpeen

24th February 2013, 02:05 AM   |  #1  
OP Junior Member
Thanks Meter: 0
 
9 posts
Join Date:Joined: Feb 2013
Hi i recently flashed my sprint gs3 to boost on my own and am having some difficulties with the getting the 3g to work and the mss to send. I tried a guide for mms but it wouldnt let me change the first setting described and im not able to link it as im a new member. As for the 3g i bought my donor info off of ebay and I cant figure out how to get the ha and aaa keys from the files i received. They were 5 text files with numbers in titled 465 466 1192 and 1194 also another file i used. Any help at all would be much apprreciated
24th February 2013, 02:13 AM   |  #2  
CNexus's Avatar
Recognized Contributor
Flag /home/cnexus/android
Thanks Meter: 13,734
 
9,057 posts
Join Date:Joined: May 2012
Donate to Me
More
Re: MMS and 3G boost flashed problem
Quote:
Originally Posted by nigpeen

Hi i recently flashed my sprint gs3 to boost on my own and am having some difficulties with the getting the 3g to work and the mss to send. I tried a guide for mms but it wouldnt let me change the first setting described and im not able to link it as im a new member. As for the 3g i bought my donor info off of ebay and I cant figure out how to get the ha and aaa keys from the files i received. They were 5 text files with numbers in titled 465 466 1192 and 1194 also another file i used. Any help at all would be much apprreciated

Add the link to the guide you used (put spaces between the different sections)
Like this: www DOT boost guide site DOT com / guide DOT html
24th February 2013, 02:48 AM   |  #3  
OP Junior Member
Thanks Meter: 0
 
9 posts
Join Date:Joined: Feb 2013
Quote:
Originally Posted by CNexus

Add the link to the guide you used (put spaces between the different sections)
Like this: www DOT boost guide site DOT com / guide DOT html


I got the phone ready and set up an account and then over the air activated and updated the prls and such then rooted it to try this guide for the mms but the first setting it says to change would not change on my phone it just reverted back to the way it was.
http :/ /forums .androidcentral.com/sprint-galaxy-s-iii/203833 -how-get-mms-pictures- samsung-galaxy-s3-flash-boost-mobile.html

As for the 3G It displays the 3G logo but in the settings it says 1xRTT:6 under mobile network type. To get the 3g to work i need to figure out how to get the ha and aaa keys from the donor info i purchased. And again any info would be very much appreciated
24th February 2013, 08:12 AM   |  #4  
J_apa_n's Avatar
Senior Member
Flag SOUTH CENTRAL
Thanks Meter: 23
 
161 posts
Join Date:Joined: Jul 2010
More
first, which doner are you using?

the HA key is "secret" without the quotes

1192 is where you'll find the AAA key, it should be the 10 digits after the 0's

all you need is your user name & that should fix your 3g.


for MMS

replace the apn-config.xml file in
root/system/etc

reboot into recovery & fix permissions


remember to do this EVERYTIME you flash a new rom

reboot system

then ##DATA#

edit

enter your msl

other

then lte apn
& select the new apn file

also, dont forget to fix the mmsc url
24th February 2013, 09:40 AM   |  #5  
OP Junior Member
Thanks Meter: 0
 
9 posts
Join Date:Joined: Feb 2013
Quote:
Originally Posted by J_apa_n

first, which doner are you using?

the HA key is "secret" without the quotes

1192 is where you'll find the AAA key, it should be the 10 digits after the 0's

all you need is your user name & that should fix your 3g.


for MMS

replace the apn- config . xml file in
root/system/etc

reboot into recovery & fix permissions


remember to do this EVERYTIME you flash a new rom

reboot system

then ##DATA#

edit

enter your msl

other

then lte apn
& select the new apn file

also, dont forget to fix the mmsc url



The donor info ii have is either from an incognito or a rant they didnt specify. The guide im using says to do this "3G working using DFS 4.0.0.4 or 4.0.0.5



14. Click on the ports button and connect to the proper port

put in your SPC code and click on the send spc button

15. Go to the Programming tab.

16 Click on the Data sub tab.

17. Click on Read button.

18. Under PAP:
UID: samsung01 @ sprintpcs dot com
Pwd: samsung

19. Under HDR AN:
NAI: MEID @ hcm.sprintpcs dot com
Pwd: (checked) enter your 32 digit HEX AAA password

20. Under HDR AN Long:
UID: MEID @ hcm.sprintpcs dot com
Pwd: (checked) enter your 32 digit HEX AAA password

21. Put a check mark on "Authentication require password encryption"

22. Click on the Write button

23. Goto the Mobile IP sub tab.

24. Click on Read button.

25. Right click on the first Profile radio button (that's Profile 0), and enable it.

26 Click on the Write button

27. On the Selected Profile settings section:
NAI: use the sprint NAI you saved to your text file
Home address: 0.0.0.0
Prim HA address: 68.28.15.12
Sec HA address: 68.28.31.12
AAA Shared Secret: enter your 32 digit sprint HEX AAA password you saved in your text file (put check mark on "Enter value in HEX")
HA Shared Secret: the word secret (remove check mark on "Enter value in HEX"

28. Click on Write current profile settings.

this next boost section may not be necessary however this is how I did mine and it worked well so you decide if you want to put in the boost stuff

left Click on the second profile button
On the Selected Profile settings section:
NAI: use the Boost NAI you saved to your text file
Home address: 0.0.0.0
Prim HA address: 255.255.255.255
Sec HA address: 68.28.89.76
AAA Shared Secret: enter your 12 digit sboost HEX AAA password you saved in your text file (put check mark on "Enter value in HEX")
HA Shared Secret: the word secret (remove check mark on "Enter value in HEX"

29. Click on Write current profile settings.



30. Reboot the phone. Then run the Update Profile and Update PRL on your Galaxy S3.

31. go to phone dialer ##3282# then edit and put in your 6 digit SPC/MSL code go to others amd mmsc URL change it to h t t p mm. myboos tmobile . com"

My nv files 456 466 1152 and 1154 are in this format

1192 (0x04A8)
XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX and there are 8 lines like that

As for the mms i dont have a boost .xml file to use and couldnt find one in any forum
24th February 2013, 01:34 PM   |  #6  
KennyG123's Avatar
RC-RT Committee / Senior Moderator / Spider-Mod
Flag Right behind you!
Thanks Meter: 27,259
 
28,951 posts
Join Date:Joined: Nov 2010
Donate to Me
More
Re: MMS and 3G boost flashed problem
Questions go in Q&A
Thread moved

Friendly Neighborhood Moderator
23rd August 2013, 07:19 PM   |  #7  
Junior Member
Thanks Meter: 0
 
1 posts
Join Date:Joined: Aug 2013
Quote:
Originally Posted by J_apa_n

first, which doner are you using?

the HA key is "secret" without the quotes

1192 is where you'll find the AAA key, it should be the 10 digits after the 0's

all you need is your user name & that should fix your 3g.


for MMS

replace the apn-config.xml file in
root/system/etc

reboot into recovery & fix permissions


remember to do this EVERYTIME you flash a new rom

reboot system

then ##DATA#

edit

enter your msl

other

then lte apn
& select the new apn file

also, dont forget to fix the mmsc url

Hi. I'm having a problem getting my Spring GS3's 3g and MMS to work.

I used a guide to change the MEID to that of an old Boost HTC Design.

I flashed CM10 on the phone, but was having some signal issues.

After flashing to Wicked Sensations I couldn't connect to the network until I used ##72786#. Now voice and texts work, but I can only get 1x data and I can't edit the APNs.

I use Google Gesture search to get into APN settings, but all the options in the Edit Access Point screen are grayed out and it won't let me edit anything.

This is my first flashing job and I have been searching for days trying to solve this issue. Any help will be greatly appreciated.

I think what you said about the user name might help me, but I don't know where to go to change that or what to change it to.

I'm currently on Wicked Sensations if that helps at all.

Thanks!

Edit: Here's the link to the guide I used: http: dashdash z4cellforums dot webs dot com/apps/forums/topics/show/8667356
Last edited by postauma; 24th August 2013 at 04:05 AM.
15th September 2013, 04:00 AM   |  #8  
shadricksimms's Avatar
Senior Member
Thanks Meter: 16
 
290 posts
Join Date:Joined: Oct 2011
U get mms to work yet if not I'll help u pm me

Sent from my SPH-L900 using Tapatalk 2

Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes