Originally Posted by marko_serb

Does anybody know how to access the hardware serial port (on Blue Angel)? I can use IR (COM1) and Bluetooth (COM4) to send/recieve data, but the bottom pins don't give any voltage. I've tried other ports (to COM9) but the device hangs unless it's COM2.

Here's the test app, select port on the left and then click 'Open Port'. When the port is open, the device is showing what is read at the port. You can click 'Salji' to start/stop sending dummy data via port or "Lista Portova" to list the available ports.
http://www.megaupload.com/?d=T36RIZKE

You have to deactivate IR to get Serial Port working, as thay use the same port!
(Settings/Connections/Beam/deactivate Receive all incoming beams )

I've tried that, when "Receive all incoming beams" is enabled - COM1 is invisible to the program and reports error, when disabled - the IR becomes COM1

Originally Posted by marko_serb

I've tried that, when "Receive all incoming beams" is enabled - COM1 is invisible to the program and reports error, when disabled - the IR becomes COM1

Try the attached file by haicom.
Serial and USB crandle have different pin-out!
http://forum.xda-developers.com/wiki...tle=Connectors
Serial should be Com2 and is usable when Com1/IR is disabled.

Thanks! I'll give it a try as soon as I find a way to disable IR (and find some time to play with it)