Dear all
finally it's done and you can enjoy the latest upgrade and here's the instructions.
How to upgarde your Qtek 1010 ?
i have uploaded the Software ROM upgrade at the following site with the help of our friend Antonin Hruska LumpiStefan who provide me free space and thanks to Markh for mirrored the updates with some UK 02 specific instructions .
Download the upgarde files from the mirrored site since the prevous link was not working
here
1. Backup your data via ActiveSync or onto a Storage Card. if you don't have ActiveSync you can dowload it
here
2. Upgrade the CE build before upgrading the Radio build by running this file first RUU 3.16.52.exe
3. Attach your Qtek 1010 directly to the computer with either a USB cable or Serial cable
4. Ensure the ActiveSync connection is running and is connected to the device and make sure it's connected to the power.
5. After the hard reset the CE update is complete.
6. Reconfigure CE and restore your data.
7. Attach Your Qtek 1010 to the computer again and disconnect the power supply and make sure it's charged Minimum 70 % & it's highly recommended to set off the Security PIN or disable it through start/settings/personal/phone as advice by Mr. Waleed in another threat on this forum
8. Run this file RSU 3.23.01.exe
9. After the soft reset the radio update is complete.
if your device didn't start the upgrade for any reason do hard rest and follow the instructions carefully
good luck and enjoy your little toy
if you need to contact me for any reason this is my E-Mail address
anonymous@uae.us
Regards.
Othman

http://www.pocketpc4arab.com[/url]