Introducing XDA:DevCon – A Conference For Developers By Developers
XDA Developers Android and Mobile Development Forum
Forgot your password?
 
Post Reply+
Tip us?
 
datasafe
Old
#1  
Member - OP
Thanks Meter 0
Posts: 75
Join Date: May 2003
Default Can I install the latest MS Pocket PC on my XDA1??

Hi all

I have an XDA running Pocket PC 2002.

Is it possible for me to upgrade this or remove what's installed and install the latest Pocket PC op system?

I'm not sure which is the latest, I think PPC 2003?

What will I need to do this and is the procedure available?

Regards

JC
John Cooper
 
Rudegar
Old
#2  
Rudegar's Avatar
Retired Moderator
Thanks Meter 15
Posts: 12,500
Join Date: Jul 2003
Location: DK
http://wiki.xda-developers.com/wiki/XDAtools

Quote:
The 4.01.00 ENG version is here ftp://tmobile:rom@130.39.48.102:21 ..
but be careful as it contains the upgrade for RSU and I 'm not sure
it supports 900/1800 or not since it's TMO upgrade.
If your device has no Radio problems (GSM),
my advice would be to down load the file, use Winzip or WinRAR to
extract the NK.nbf file which the ROM upgrade, put it on SD card and flash your XDA using the bootloader.
PS: if you are sure that your network is 1800 MHz then do NOT use R6.24 for RSU upgrade.
Good luck

Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:

SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
http://kitchen.romanweb.com/kitchen/index.php
hhhmm ok i may be a jerk but i'm a jedi jerk like my father was before me
BTW "I can't use a skeleton arm with that"
 
Post Reply+
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Go to top of page...