LumpiStefan >>>>> PLEASE HELP

---

I purchased a Siemens SX56 and it will not power t has black lines all across the screan. I can get it 2 boot Wallaby Bootloader and run all test, i can get it 2 try 2 boot from sd card ( I do not 1/2 any back up info on it )
DO u think its the battery.

Where can i get a bootable sd card?

any help will be appreciated.

thank U

Adrian Henrnadez

You need to go to lumpistefans kitchen, build a rom and choose sd card flashing from the menu at base of screen, once you download and unzip the file, you will need xdatools, choose the unzipped file as source and choose your sd card as destination from the drop down, this will be the drive letter assigned to your card through a card reader writer, once the sd card is created as a bootable device just put it in the phone, push reset while holding power and then push the centre of the 4 way rocker when asked if you wish to proceed.

Thank u Sr

---

Tomorrow will go 2 rat shack and get me a card reader and try.

will it fix the screen problem all balck lines.

thanks

adrian
:?

Do the black lines show in bootloader?

Lines

---

No the bootloader runs thru ok i can even do test 2 all the sd card screen , ect ect

thanks fast respond

adrian
:shock:

I GOT IT!!!!!!!!!!!!!!!!!!!!!!!!:)

---

I got it 2 work thank u sir.

The only thng that the phone is asking me 4 the sim unlock code any sugestions of what 2 do.

thank U

Re: I GOT IT!!!!!!!!!!!!!!!!!!!!!!!!:)

---

Originally Posted by Adrianx99

I got it 2 work thank u sir.

The only thng that the phone is asking me 4 the sim unlock code any sugestions of what 2 do.

thank U

You have to unlock your phone.
What version of rom have you installed?
You can try the xdaunlock tool for unlocking.
Check this:
http://wiki.xda-developers.com/wiki/UnlockWiz

HTH

Stefan

I 1/2 unlocked it

---

I 1/2 no success with phone signal has no signal. I believe it is now unlock what do i need 2 do 2 get signal on my phone.

thank U guys

the web page rules


adrian

Re: I 1/2 unlocked it

---

Originally Posted by Adrianx99

I 1/2 no success with phone signal has no signal. I believe it is now unlock what do i need 2 do 2 get signal on my phone.

thank U guys

the web page rules


adrian

Check the label on the back of your device if it's writen PW10A1 then go to bootlader and change the Gsm frequency to 900 or 1800 Mhz depending on your gsm provider or if it was PW10B1 change it to 1900 MHZ.. good luck now