Imate PDA2K With Hands Free Profile

---

Is there a Rom available that has the Hands Free Profile Working?. The latest one from Imate has the other party hearing me but I cannot hear them! I just want that feature & a Stable rom that I do not have to do a soft reset 3 or 4 times a day. I would settle for a soft reset 2 times a day.I need help bad! I have been waiting since I got this in October.Thanks for any help.
Jerry :cry:

Re: Imate PDA2K With Hands Free Profile

---

I have rom 1.22.00 WWE i use this with a parrot BT car kit, and it works perfectly!

Originally Posted by jerryjans

Is there a Rom available that has the Hands Free Profile Working?. The latest one from Imate has the other party hearing me but I cannot hear them! I just want that feature & a Stable rom that I do not have to do a soft reset 3 or 4 times a day. I would settle for a soft reset 2 times a day.I need help bad! I have been waiting since I got this in October.Thanks for any help.
Jerry :cry:

My rom is 1.22.00 WWE
Extended ROM is 1.22.557

I use it with my HCB300 sonyericsson car kit and it works without any problem.

Wh

---

Hugot : what is your Bluetooth stack Version? Is your Sony car kit Hands free or Headset? Can you please post the following Rom Date, Radio Version, Protocal Version. Where did you get the rom upgrade from & what device are you using?

Guest what are the sme things on your device that I asked Hugot? If you are using the latest rom version from Imate then you are using the headset version of the Parrot CK3100. Parrot CK3100 works both Hands Free & Headset. What is your version of the Parrot CK3100? To find that out go to settings, Advanced settings on the Parrot & click on About . This will tell you what version Parrot you have.

Hey Jerry,
i'm using ther Parrot CK3300 with no problems apart for dialling from the parrot unit.
The rom on the Imate PDA2K is 1.22.00 WWE.
The Rom on the Parrot is the lastet Rom Version 4.10.
I get evething showing on the parrot display Network Signal caller id it work great>
I only which that it could dial from the parrot unit.
I've spoken to Parrot they are looing in to the problem up to now I have not find a solution.
Regards
Gigino

To dial from the Parrot you must have this as your phone #"15554445678"
I had to change all my telephone numbers to this format to work. If you have 1 (555)-444-5678 this will not work from the Parrot . Use the top & it will work, I guarantee it 100%. This was on there forum several months ago before they changed there format on the forum. Remember no dashes or ( ) in the telephone number & country code in format 1 for the USA. Go for it.

Hi jerrycans

i previouly posted as guest

The parrot 3100 version is 4.05
i am 99% sure that is is connected as Handsfree, as i it stays connected all the time, where as on the XDA2 it only connect upon incomming call and the screen says 'Headset'

Whereas on the pda2k as i say connected constantly, says 'network ok' on the screen, i can dial out via the parrot, but contacts are not available!

as for the imate it is the latest rom from club imate

ROM ver: 1.22.00 WWE
ROM date: 10/22/04
Radio Ver: 1.06.00
Protocol ver: 1337.38
ExtROM: 1.22.162 WWE

using broadcom BT-PPC/PE version 1.0.0 Build 3500

Originally Posted by jerryjans

Guest what are the sme things on your device that I asked Hugot? If you are using the latest rom version from Imate then you are using the headset version of the Parrot CK3100. Parrot CK3100 works both Hands Free & Headset. What is your version of the Parrot CK3100? To find that out go to settings, Advanced settings on the Parrot & click on About . This will tell you what version Parrot you have.

HI Searly: To dial by the parrot use this setup: 15554445678 for the phone number. after you Parrot is paired disconnect the Parrotin sttings. Go to contacts, Highlight as many as you can, right click on the highlighted contacts & pick send by Bluetooth. .it will search for the Parrot ,& fibd it ,click ok & send, do this until all your contacts are sent.. Reconnect the Parrot & you can dial from the Parrot. Parrot just came out with a new ypgrade I will have to flash mine to the latest revision. I wrote to Widcomm & they know that this is a known issue.

Hi

i have just upgraded to the latest parrot firmware, little difference, i think most of the changes relate to other handsets

i did figure out the problem with contacts, i was using 'beam' this does not work!

i use pocket informant, and selecting the contacts, then goto extra 'send via bluetooth' this automatically kills the handsfree conection sends the contacts the reconnects

caller ID all works well, but the phone numbers have to be entered without spaces etc

all in all i am quite please, certainly glad i upgraded from the imate ppc!

Originally Posted by jerryjans

HI Searly: To dial by the parrot use this setup: 15554445678 for the phone number. after you Parrot is paired disconnect the Parrotin sttings. Go to contacts, Highlight as many as you can, right click on the highlighted contacts & pick send by Bluetooth. .it will search for the Parrot ,& fibd it ,click ok & send, do this until all your contacts are sent.. Reconnect the Parrot & you can dial from the Parrot. Parrot just came out with a new ypgrade I will have to flash mine to the latest revision. I wrote to Widcomm & they know that this is a known issue.