Post Reply

KT-SGS4 [Kernel] Builds [Discussion] ◆ALL VARIANTS◆ [AOSP/TW/GE] ★KTWEAKER SHOP★

OP LuigiBull23

5th August 2013, 06:32 PM   |  #1  
LuigiBull23's Avatar
OP Recognized Contributor
Flag Holyoke
Thanks Meter: 5,430
 
5,627 posts
Join Date:Joined: Jan 2013
Donate to Me
More
ALL CREDITS GO TO THE ONE AND ONLY KTOONSEZ FOR THIS AWESOME KERNEL AND GIVING ME THE OPPORTUNITY TO PROVIDE THESE BUILDS.




Welcome!

Some of you may know me from the S3 forums but to clarify, I had offered a number of kernel builds for users to easily obtain all within a single thread. I am proud to say it has gained a significant amount of feedback. So I come to YOU today with the same purpose in mind. I am in no way affiliated with Ktoonsez or his work. I’m just a simple member of the XDA community who happens to be a huge supporter of this kernel and its creator. This is just my way of giving back. I am aware of some of the issues that may occur on updated builds for some users as well as the difficulties faced when fine tuning the kernel and this is my response to that:


This is by no means intended to replace any of the original KT-SGS4 kernel threads. The purpose of this thread is simply to work in conjunction with them by providing a variety of builds for users to experiment with and see which versions function properly on each of their respective phone models. I'm also bringing to you my Ktweaker Shop filled with tons of pre-configured settings compiled by myself and others in attempt to further assist S4 users with improving their overall experiences on this device or to simply use as a baseline to work upon tweaking further. So I’ve gathered just about all of the current and previous kernel builds I had hidden within my pc as well as all the various Ktweaker settings and am sharing them with the public. I hope this makes a difference for all you guys. ENJOY!!




POST #2: Reserved for T-MOBILE users

POST #3: Reserved for AT&T users

POST #4: Reserved for SPRINT users

POST #5: Reserved for VERIZON users

POST #6: Reserved for INTERNATIONAL users

POST #7: Reserved for the KTWEAKER SHOP

POST #8: Reserved for SCRIPTS & TEST PROFILES




No need for flashing previous builds to receive OTA's as all posts will be updated regularly upon future releases. So please be sure to refer back here for all builds from this point moving forward!



Please make absolutely sure you are downloading from the post intended for your phone. Nor I or Ktoonsez will be held liable for anything that may occur to your device. So please...


***FLASH AT YOUR OWN RISK***



Quote:

"Smart stay and smart scroll on pre-MF4 TouchWiz ROMs require the 2013-06-10 TW build."



Quote:

Always do the following AFTER installing the kernel:
1. Clear cache
2. Clear dalvik
3. Fix Permissions




If you are manually UPDATING the kernel, follow my recommended procedure for best possible results:

1) Backup current Ktweaker settings
2) Navigate to Settengs > Apps > Ktweaker
3) Clear cache and data then force stop
4) {Optional} Open any root browser, mount as r/w, then navigate to /system/app/ and delete Ktweaker apk
5) {Optional} Clear all Superuser logs
6) Reboot Recovery
7) Flash kernel
8) Wipe cache/dalvik
9) Fix permissions
10) Reboot
11) Restore Ktweaker settings
12) Profit?



Quote:

If you get this message after booting up the kernel:
"The device has detected an application attempting ..."
Go to the "/system/app/" folder and delete the files that begin with "knox"












NOTE: If at any point Ktoonsez no longer wants this thread open it will be closed without question.




Please visit original kernel thread for change logs, extras, etc...
If you like and support his work, donate with this link:
http://forum.xda-developers.com/dona....php?u=4325945
Last edited by LuigiBull23; 27th December 2013 at 12:02 AM.
The Following 82 Users Say Thank You to LuigiBull23 For This Useful Post: [ View ]
5th August 2013, 06:33 PM   |  #2  
LuigiBull23's Avatar
OP Recognized Contributor
Flag Holyoke
Thanks Meter: 5,430
 
5,627 posts
Join Date:Joined: Jan 2013
Donate to Me
More
**********T-MOBILE**********



Quote:

KT-SGS4 Jellybean kernel features
•Must have a Touchwiz Rooted ROM
•Must have CWM or other custom recovery installed

•Linux kernel 3.4.86
•Samsung open source
•Optimized kernel configuration
•Updated USB driver
•unsecure root adb
•Voltage interface
•CPU Overclocking
•CPU Underclocking
•Boots on stock table (USE KTweaker app to enable OC steps all the way to 2322 Mhz. BE AWARE THAT I WAS VERY CONSERVATIVE ON THE LOW SIDE OF THE OC STEPS, SO THEY WILL NEED SOME TWEAKING!)
•KTweaker app for kernel control
•KTweaker Widget

•Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE, ROW, FIFO, FIOPS)
•GOVERNORS (ktoonservativeq, intellidemand, msm-dcvs, wheatley, userspace, smartassh3, slp, powersave, pegasuq, nightmare, interactive, dancedance, conservative, badass, asswax, adaptive, abyssplug, performance, ondemand
•Thanks to Talustus we now have exFAT for Touchwiz and AOSP


Downloads

AOSP KitKat 4.4 VERSIONS:
https://copy.com/k9ryAE0dwLHs

Google Edition KitKat 4.4 VERSIONS:
https://copy.com/hsciC7dkz66V

Touchwiz KitKat 4.4 VERSIONS:
https://copy.com/9Gtgf0GUJkS4IU8


AOSP JELLYBEAN 4.3 VERSIONS:
https://copy.com/4ZzqCaMCwfDx

Touchwiz JELLYBEAN 4.3 VERSIONS:
https://copy.com/kEWuwwaGj8j2

Google Edition JELLYBEAN 4.3 VERSIONS:
https://copy.com/EGHYzNqxuLGd


Touchwiz JELLYBEAN 4.2.2 VERSIONS:
https://copy.com/P0SYiTNnxfIj

AOSP JELLYBEAN 4.2.2 VERSIONS:
https://copy.com/doRqwyyJgbNz








Original kernel thread: http://forum.xda-developers.com/show....php?t=2289140
Last edited by LuigiBull23; 19th April 2014 at 10:26 PM.
The Following 30 Users Say Thank You to LuigiBull23 For This Useful Post: [ View ]
5th August 2013, 06:33 PM   |  #3  
LuigiBull23's Avatar
OP Recognized Contributor
Flag Holyoke
Thanks Meter: 5,430
 
5,627 posts
Join Date:Joined: Jan 2013
Donate to Me
More
**********AT&T**********



Quote:

KT-SGS4 Jellybean kernel features
•Must have a Touchwiz Rooted ROM
•Must have CWM or other custom recovery installed

•Linux kernel 3.4.86
•Samsung open source
•Optimized kernel configuration
•Updated USB driver
•unsecure root adb
•Voltage interface
•CPU Overclocking
•CPU Underclocking
•Boots on stock table (USE KTweaker app to enable OC steps all the way to 2322 Mhz. BE AWARE THAT I WAS VERY CONSERVATIVE ON THE LOW SIDE OF THE OC STEPS, SO THEY WILL NEED SOME TWEAKING!)
•KTweaker app for kernel control
•KTweaker Widget

•Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE, ROW, FIFO, FIOPS)
•GOVERNORS (ktoonservativeq, intellidemand, msm-dcvs, wheatley, userspace, smartassh3, slp, powersave, pegasuq, nightmare, interactive, dancedance, conservative, badass, asswax, adaptive, abyssplug, performance, ondemand
•Thanks to Talustus we now have exFAT for Touchwiz and AOSP


Canadian users, DO NOT FLASH the kernel from this post. You MUST flash the TMO version from post #2


Downloads

AOSP KitKat 4.4 VERSIONS:
https://copy.com/bTEPKJuknXn3

Google Edition KitKat 4.4 VERSIONS:
https://copy.com/X0ZwwQVRHPKd

Touchwiz KitKat 4.4 VERSIONS:
https://copy.com/6a8eptTrL6gD3hT


AOSP JELLYBEAN 4.3 VERSIONS:
https://copy.com/lSb0xRxqmICV

Touchwiz JELLYBEAN 4.3 VERSIONS:
https://copy.com/deGgFdixXTXW

Google Edition JELLYBEAN 4.3 VERSIONS:
https://copy.com/BIusi3ksxYws


Touchwiz JELLYBEAN 4.2.2 VERSIONS:
https://copy.com/hfKGlCGgCSB1

AOSP JELLYBEAN 4.2.2 VERSIONS:
https://copy.com/O02Gej8ozbOw










Original kernel thread: http://forum.xda-developers.com/show....php?t=2292341
Last edited by LuigiBull23; 19th April 2014 at 10:26 PM.
The Following 11 Users Say Thank You to LuigiBull23 For This Useful Post: [ View ]
5th August 2013, 06:34 PM   |  #4  
LuigiBull23's Avatar
OP Recognized Contributor
Flag Holyoke
Thanks Meter: 5,430
 
5,627 posts
Join Date:Joined: Jan 2013
Donate to Me
More
**********SPRINT**********


Quote:

KT-SGS4 Jellybean kernel features
•Must have a Touchwiz Rooted ROM
•Must have CWM or other custom recovery installed

•Linux kernel 3.4.86
•Samsung open source
•Optimized kernel configuration
•Updated USB driver
•unsecure root adb
•Voltage interface
•CPU Overclocking
•CPU Underclocking
•Boots on stock table (USE KTweaker app to enable OC steps all the way to 2322 Mhz. BE AWARE THAT I WAS VERY CONSERVATIVE ON THE LOW SIDE OF THE OC STEPS, SO THEY WILL NEED SOME TWEAKING!)
•KTweaker app for kernel control
•KTweaker Widget

•Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE, ROW, FIFO, FIOPS)
•GOVERNORS (ktoonservativeq, intellidemand, msm-dcvs, wheatley, userspace, smartassh3, slp, powersave, pegasuq, nightmare, interactive, dancedance, conservative, badass, asswax, adaptive, abyssplug, performance, ondemand
•Thanks to Talustus we now have exFAT for Touchwiz and AOSP


Downloads

AOSP KitKat 4.4 VERSIONS:
https://copy.com/aNXcVH2QVfB9

Touchwiz KitKat 4.4 VERSIONS:
https://copy.com/fj30ECCfQzVf


AOSP JELLYBEAN 4.3 VERSIONS:
https://copy.com/lpekDcQZijcg

Touchwiz JELLYBEAN 4.3 VERSIONS:
https://copy.com/ujl1pB38cP7W

Google Edition JELLYBEAN 4.3 VERSIONS:
https://copy.com/oinxlW3Uq9Ai


Touchwiz JELLYBEAN 4.2.2 VERSIONS:
https://copy.com/WLvmsMj4YCdr

AOSP JELLYBEAN 4.2.2 VERSIONS:
https://copy.com/jsvgAUpq39ti










Original kernel thread: http://forum.xda-developers.com/show....php?t=2288309
Last edited by LuigiBull23; 19th April 2014 at 10:27 PM.
The Following 12 Users Say Thank You to LuigiBull23 For This Useful Post: [ View ]
5th August 2013, 06:34 PM   |  #5  
LuigiBull23's Avatar
OP Recognized Contributor
Flag Holyoke
Thanks Meter: 5,430
 
5,627 posts
Join Date:Joined: Jan 2013
Donate to Me
More
**********VERIZON**********



Quote:

KT-SGS4 Jellybean kernel features
•Must have a Touchwiz Rooted ROM for TW version
•Must have a AOSP Rooted ROM for the AOSP version
•Must have CWM or other custom recovery installed

•Linux kernel 3.4.86
•Samsung open source
•Optimized kernel configuration
•Updated USB driver
•unsecure root adb
•Voltage interface
•CPU Overclocking
•CPU Underclocking
•Boots on stock table (USE KTweaker app to enable OC steps all the way to 2322 Mhz. BE AWARE THAT I WAS VERY CONSERVATIVE ON THE LOW SIDE OF THE OC STEPS, SO THEY WILL NEED SOME TWEAKING!)
•KTweaker app for kernel control
•KTweaker Widget

•Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE, ROW, FIFO, FIOPS)
•GOVERNORS (ktoonservativeq, intellidemand, msm-dcvs, wheatley, userspace, smartassh3, slp, powersave, pegasuq, nightmare, interactive, dancedance, conservative, badass, asswax, adaptive, abyssplug, performance, ondemand
•Thanks to Talustus we now have exFAT for Touchwiz and AOSP


Downloads

AOSP KitKat 4.4 VERSIONS:
https://copy.com/87bRx3sudelf

Google Edition KitKat 4.4 VERSIONS:
https://copy.com/hgsxlxegZ3WD

Touchwiz KitKat 4.4 VERSIONS:
https://copy.com/6JDHcwscMNuzQyq


AOSP JELLYBEAN 4.3 VERSIONS:
https://copy.com/XxBonTWMjCwf

Touchwiz JELLYBEAN 4.3 VERSIONS:
https://copy.com/Z7WeSmat4YTN

Google Edition JELLYBEAN 4.3 VERSIONS:
https://copy.com/3PkFEpycgAqU


Touchwiz JELLYBEAN 4.2.2 VERSIONS:
https://copy.com/rTDTNhruhpsR

AOSP JELLYBEAN 4.2.2 VERSIONS:
https://copy.com/HtHyI4MhQyPc










Original kernel thread: http://forum.xda-developers.com/show....php?t=2294083
Last edited by LuigiBull23; 21st June 2014 at 10:32 PM.
The Following 16 Users Say Thank You to LuigiBull23 For This Useful Post: [ View ]
5th August 2013, 06:35 PM   |  #6  
LuigiBull23's Avatar
OP Recognized Contributor
Flag Holyoke
Thanks Meter: 5,430
 
5,627 posts
Join Date:Joined: Jan 2013
Donate to Me
More
**********INTERNATIONAL**********



Quote:

KT-SGS4 Jellybean kernel features
•Must have a Touchwiz Rooted ROM
•Linux kernel 3.4.86
•Samsung open source
•Optimized kernel configuration
•unsecure root adb
•Voltage interface
•CPU Overclocking
•CPU Underclocking
•Boots on stock table (USE KTweaker app to enable OC steps all the way to 2322 Mhz. BE AWARE THAT I WAS VERY CONSERVATIVE ON THE LOW SIDE OF THE OC STEPS, SO THEY WILL NEED SOME TWEAKING!)
•KTweaker app for kernel control
•KTweaker Widget

•Schedulers (CFQ, BFQ, VR, SIO, NOOP, DEADLINE, ROW, FIFO, FIOPS)
•GOVERNORS (ktoonservativeq, intellidemand, msm-dcvs, wheatley, userspace, smartassh3, slp, powersave, pegasuq, nightmare, interactive, dancedance, conservative, badass, asswax, adaptive, abyssplug, performance, ondemand
•Thanks to Talustus we now have exFAT for Touchwiz and AOSP


Downloads

AOSP KitKat 4.4 VERSIONS:
https://copy.com/jcvkN6ELhSyw

Google Edition KitKat 4.4 VERSIONS:
https://copy.com/ajiB89TGosd0

Touchwiz KitKat 4.4 VERSIONS:
https://copy.com/UQPuEEUNYc04


AOSP JELLYBEAN 4.3 VERSIONS:
https://copy.com/sw8XSJUsZk09

Touchwiz JELLYBEAN 4.3 VERSIONS:
https://copy.com/rDjb2DBt6C2A

Google Edition JELLYBEAN 4.3 VERSIONS:
https://copy.com/Wk9iHznO3haQ


Touchwiz JELLYBEAN 4.2.2 VERSIONS:
https://copy.com/yUl248Xo2RcU

AOSP JELLYBEAN 4.2.2 VERSIONS:
https://copy.com/ZyuctnlWseGE










Original kernel thread: http://forum.xda-developers.com/show....php?t=2297379
Last edited by LuigiBull23; 19th April 2014 at 10:28 PM.
The Following 18 Users Say Thank You to LuigiBull23 For This Useful Post: [ View ]
5th August 2013, 06:35 PM   |  #7  
LuigiBull23's Avatar
OP Recognized Contributor
Flag Holyoke
Thanks Meter: 5,430
 
5,627 posts
Join Date:Joined: Jan 2013
Donate to Me
More


Welcome to the Ktweaker Shop!

Here you will find all of the pre-configured settings provided by myself and some of our fellow users. As a proud member of Team Kernelizers, I am offering a variety of profiles specifically for S4 users with their personal needs in mind as it's pretty clear no one favors the same governor, scheduler, etc.. Any suggestions are always welcome. All future settings will be added here for sharing and discussing our settings as well as gaining approval on a profile to be added into the built-in Shop in Ktweaker. Keep in mind that results will always vary per device regardless on the settings being used.

All profiles have been grouped into 3 sub-categories; "Conservative", "Balanced", and "Performance", which are used to classify each profile based on their overall performance and what they are expected to deliver to your device. The 4th sub-group is where you can find some of our best "Projects" in which offers 2 or more profiles for each. Make your selections based on your usage and apply what works best for you and your phone. We're here to help eachother out and with more options comes better experiences for everyone running this kernel. Big thanks to ALL who have contributed!


So shop around.. pick and choose.. load and go!!



Installation

Download links will include the specified profile(s) as well as an "Adjustments" and an "About" file. The "Adjustments" file is just for easy view of all the changes made to a profile compared to stock settings.

1. Download the file(s) to your phone.
2. Copy ONLY the XML(s) (DO NOT copy the "Adjustments" or "About" file) to /sdcard/KTweaker/Profiles folder using a file Manager of your choice.
3. Open Ktweaker app and click on "Profiles & Scripts" then click "Restore Prefs from sdcard".
4. The file you just copied should be listed there. Select the one you want to apply.
5. After applying, make sure the "Set options on boot" setting on the main menu of KTweaker has a little green text bellow confirming that the settings will be applied upon reboot.
6. Profit!




Conservative



Asking Alexandria

This is a battery driven profile in which focuses on saving as much juice as possible while also maintaining stability and providing an extremely snappy feel to your phone. It is quite possibly one of the smoothest and snappiest battery saving profiles available.

Why Asking Alexandria?
It's named after yet another one of my top favorite metalcore bands and I chose this because Alexander The Great basically ruled the world at one point and "Alexandria" is the female equivalent to that name, which has become known to mean the "one who comes to save warriors".
"Asking" was an addition to the title name as an indication in the sense that we are all asking Alexandria what she can really do to our phone.


https://copy.com/kqIXuJ1N8LLh



Bless The Child v3 (updated: 10~25~13)

Based on Ktoonservateq and aimed towards battery. This is specifically for all the battery hungry users out there wanting to conserve as much power as possible. So don't expect the BEST but rather decent performance out of this one.

https://copy.com/K1bNhNx6nFYd



Dead By April v2.2 (updated: 11~15~13)

This profile attempts to bring some of the best battery life possible to your device. It is similar to Bless The Child but takes things a step further . It now focuses more on snappiness but still maintains it's well known battery conservation. It manages to maintain a smooth ui for your average daily use.

https://copy.com/J8lnimxbvwpF



Infamous 1.0 by @PiggySmalls502

Quote:

Infamous is a work of pure and utter boredom, and a desire to use the SLP governor. Profile uses very low CPU frequencies, yet still runs very smooth, while still seeing great battery life.

https://copy.com/qqCrRDZiZBNh



Moonlight v3 by @Tunasty (updated: 2~12~14)

Quote:

This profile is based on Ktoonservateq and Mamba's Daylight profile. This profile is aimed towards battery and be able to use your phone without any lags. Performance has not been sacrificed either. Max Mhz is 1890 which works out pretty awesome. KT's AWESOMEEE kernel and Moonlight profile will make you fall in love with your phone

https://copy.com/yoLhPpe1QY0Q



Smooth Criminal by @ORT14

Quote:

Why Smooth Criminal you ask? Simple, this profile will keep your phone running as Smooth as ever, so smooth that it is Criminal to still get this type of battery life. Last test my phone went over two days with six plus hours of screen time without a charge (see below) while still running super smooth. This profile will change your life (well maybe not). Give it a try and let me know what you think.

https://copy.com/yQyI4ejR7uPE



Super Battery Saver 3.0 by @MavereXx (updated: 10~7~13)

Quote:

This profile is not about performance, even though its surprisingly smooth. Gentle Undervolting.. your s4 now has only a 1.1ghz processor. .. but remember: This is when battery life is all you care about!

https://copy.com/GKQ0OqDVociy



What Lies Beneath

This is an extreme battery performance setup in which essentially transforms your quad-core device into a dual core device.

Why "What Lies Beneath"?
You'll find that during light to moderate operations the cpu remains at lower frequencies for an extended period of time and will only jump to max when needed. Although it's clocked at a max of 1.3ghz it maintains a surprisingly smooth and snappy feel to your device at such low frequencies. This is where battery life is also expected to come in to play as well.


https://copy.com/m0EnRGUpkEMp



Balanced



3hands by @sew3521

Quote:

This profile is a combination of my 3 favorite profiles; Ktoonsified v2, Project Icarus-Kamikaze, and Balanced Bull: Reloaded. Each of these 3 different profiles has great aspects however I thought I could combine them to make one super efficient profile and this is what I came up with. There is an extreme amount of undervolting going on here however my S4 runs extrmely stable (Sprint S4 purchased on release day) and thanks to the Balanced Bull and Ktoonsified portions of this the interface is very snappy.

https://copy.com/wEHQOssGuSVw



Balanced Bull: Reloaded v2 (updated: 4~17~14)

These settings are very special to me as they were my very first, dating back to the Galaxy S3, and has gained an incredible amount of feedback. It has become notable for it's fairly smooth interface and amazing battery life. If this stacks up to your standards then I encourage you to use it!

https://copy.com/4XbEpD6HRYx6Qzw



Day Of Reckoning

Very similar to Nightmare To Remember but is aimed slightly more towards battery without deteriorating much of the performance. It is based off the Pegasusq governor.

https://copy.com/NkNqyUKjaudY



ECLIPSE v2 (updated: 10~25~13)

This is a performance oriented option where great battery life is also expected to intervene. This not only will bring an incredibly stable, smooth, and snappy feel to your device but will also benefit towards longer lasting battery so you can love and enjoy your phone the way you were meant to.

https://copy.com/BDIln0KrVplK



Hydra

Eclipse and Kamikaze clash with one another in this hybrid profile (BIG thanks to @mamba720027 for the amazing work done on Kamikaze!). This is perfect for those who favor one or both of these profiles. With the merging of some of the essential performance and battery elements of each profile as well as a few minor adjustments, this one also stands as it's own profile and it flies!.

https://copy.com/GuQZmkARaHKI



Ktoonsified v6 (updated: 4~17~14)

This profile was put together by none other than the BOSS himself, @ktoonsez! This is a performance oriented option in which also offers a great deal of battery life. Haven't tried these settings yet? then what are you waiting for!! Load em up and be prepared for one of the smoothest and snappiest experiences ever!

https://copy.com/yJJgpIi40Ddp



Lateralus v2 by @CamFlawless (updated: 1~15~14)

Quote:

This profile was designed in an attempt to strike a balance between battery and performance with a focus on conservative CPU scaling to maximize battery life while maintaining a smooth, fluid, and stable UI. I tested it with the Hydra script, but your personal favorite will work all the same.

https://copy.com/H6bXpcr0bEJr



Misanthrope by @CamFlawless

Quote:

The misanthrope profile seeks to optimize the balance between battery life and a smooth, lag-free UI by following the sampling logic laid out by LuigiBull23. By allowing frequent sampling and increased polling, the profile will result in the CPU being at the optimal frequency more often and quickly. Additionally, the hotplugging parameters should allow the secondary cores to come online when needed and quickly turned off following the boost. Misanthrope is named as such, because this profile hates lag and battery drain.

https://copy.com/LljHyKj384rk



Nightmare To Remember

This will likely become your beautiful, never ending nightmare.. It offers a unique balance between battery and performance but unlike Balanced Bull, it is slightly more performance oriented due to the more aggressive scale up to max CPU. However, only 2 cores will be used for the majority of the time so you can still enjoy a nice buttery smooth interface with just enough juice to last you through the day.

https://copy.com/VMFboPCy2CwU



Ragnarok v2 by @mamba720027

Quote:

This profile is tweak with 2 things in mind. Normal usage and gameing.
when doing normal tasks the governor would scale the frequency less aggressive and use minimum cores but would also climb to higher frequencys as required to complete a task depending on what apps you are useing.

Gameing or other high intensity tasks will have all cores active and cpu will utalize max cpu frequency.This will provide smooth gameplay for games such as Asphalt 8 and of course other similar games that requires a powerfull processor to justify its awesomeness. So if you want a low profile setup for regular usage to conserve battery and high profile setup for gameing and other high performance demanding tasks and dont want to swap between two profiles then this profile configuration should work nicely in such a scenario.

https://copy.com/rM3YflojYz9k



SRV v3.1 by @s3icc0 (updated: 2~14~14)

Quote:

This profile focuses on excelent battery life with no restraints to performance but still keeping pretty conservative settings to allow all users to be able to use this profile (and script) without any problems. The Core 0 is driven by heavily tuned ktoonservativeq governor, ROW scheduler is used to maximize the read performance. The frequency used is 189Mhz - 1890MHz for CPU and max 450 for GPU, the voltages are -35mV for CPU and -50mV for GPU. There is no Screen Off profile. Vibrator strength is set to 50. Read Ahead is set to 1024. LED fade mode is set to slow blinking once a time.

https://copy.com/77TRXloQfKRm



Smooth Operator v5 by @mamba720027 (updated: 4~17~13)

Quote:

This profile utalize all 4 cores on demand and serves as being a balance between battery and performance. Its as smooth as possible and utalize the full cpu power while operateing sensibly in governor scaleing.

https://copy.com/vmLLvFKhwwqV



*Stardust v2* by @mamba720027 (updated: 12~7~13)

Quote:

This Profile I put together is based on the "AbyssplugV2" governor.
Everything is tweaked and the profile can run by itself or either use the "smooth operator V2" Script or Luigi's "Hydra" Script.
Both are found in Post#8 of the OP. The choice is yours.

https://copy.com/EalqZpGb4Gnh



Super Bull 2.1 by @MavereXx (updated: 9~24~13)

Quote:

A derivative of Balanced Bull but aiming towards more extreme polarity of performance and battery life. Stable Undervolting for i337, i337m, m919, and i9505 CPU and GPUs. Overclocks up to 1998mhz going all the way down to 81mhz without causing severe lag or stuttering or slow wake ups. Tries to find the right balance between ultimate performance and battery life.

https://copy.com/Opsu7y1FLJx9



Undisputed 3 (updated: 12~11~13)

This is a universal performance setup in which combines the essential elements of other profiles by providing equal battery life, speed, performance, and stability to bring the ultimate experience to your device.

https://copy.com/UFreCzB1Wcpt



Performance



Crimson Dragon v2.1 by @mamba720027 (updated: 1~8~14)

Quote:

This is a profile that i put together from a lost in the thread Dual Core profile "Lazy Dragon". What was suppose to be a V2 Update of it turned into a 4 Core profile and something totally new, Crimson Dragon. This profile is a variable of Performace and keeping things balance. Its very smooth on TW and produce great results on AOSP as well threw testing and feedback. Please enjoy this new addition

https://copy.com/QjuMNNyyucBD



Feed The Machine

The exact opposite of Bless the Child. This is a performance oriented option for all hardcore users. If battery isn't a priority for you then this is a great option.

https://copy.com/oKLPQmmgzc1C



Ghost Rider by @galaxys3man30

Quote:

this setup can benchmark on 1890,1944 and 1998 and its been really good on battery even thou its a performance setup think im going to call it ghost rider cuz its a sleeper yea it shows good battery life but behind that is the raw performance that is on demand when needed.

https://copy.com/pKAMrciYgUFo



KTGaming

Quote:

This profile was put together by none other than the BOSS himself, @ktoonsez! This is a super performance oriented option which allows me to play any game with ZERO LAG!!!!!!!

https://copy.com/iJzItwZxSYlp



Lightning Blade v2.2 by @mamba720027

Quote:

This profile is aimed at performance and efficiently uses the 4 cores somewhat better than my first performance base profile.Â
Although it's aimed at performance it could conserve on battery as well because of the way cores are handled. If you play lots of games that require speed and processor power then this profile provides both.

https://copy.com/zs89qlw4CQr2



Notorious by @PiggySmalls502

This is a derivative of Feed The Machine. Hotplugging was turned back on and I/O scheduler was switched to ZEN along with a few other minor changes to the profile. It's aimed towards slightly better battery life but doesn't deviate too much from the performance aspect of things found in the original profile.

https://copy.com/Ip1PJtY7LCdI



Overactive Imagination by @CamFlawless

Quote:

The profile aims to be as smoooooth as possible and draws inspiration from @LuigiBull23's Rebirthing profile.

https://copy.com/YyyJat03RZMtH7o



Projects



Comatose

This project was inspired by the album of the same name by my #1 favorite rock band of all time, Skillet. It consists of 3 profiles of which are also named after 3 of my favorite tracks from this album (included in the "Extras" folder) and all focus on one key element; VARIETY.

As the name suggests, "Comatose" is geared towards battery conservation. It focuses on keeping CPU low for a prolonged period but utilizes 3 of the 4 cores on touch and the 4th on demand for fluidity. Sample rates have been decreased heavily as to increase polling and allow the other cores to quickly spike towards higher frequencies for a given task then immediately drop back down as if the component had been knocked unconscious.

The second profile is "Rebirthing". This profile will counteract the affects of Comatose by heavily boosting performance as a means to bring life and energy back into this profile that remains unconscious. Rebirthing is intended for those seeking a performance-based version of Comatose but who knows... For such a power hungry profile you may just be surprised by the great battery life it also delivers.

Some of you may not favor the heavy battery conservation that "Comatose" offers or the overall power consumption of "Rebirthing" and much prefer a mashup of elements delivered between the 2 and that is the purpose of "Whispers In the Dark". This profile is directed towards finding the right balance between these 2 profiles while still acting as a it's own profile. It utilizes most of the performance aspects from "Rebirthing". The only major differences from that are touch_boost_cpu_all_cores has been disabled and touch_boost_cpu is set at 1134Mhz instead of 1458Mhz.

Like "Comatose" it uses super_conservative_screen_on as well as a high up_threshold for that extra boost in battery performance. The profile also idles at the same minimum cpu and gpu frequencies as "Comatose" but ALL profiles run at stock 1890Mhz.

All profiles maintain the same concept of rapid cpu polling. So yes, cpu will be working consistently but my theory here is that more polling will allow the kernel to rapidly check CPU usage, thus allowing CPU to change more frequently according to the load, which in turn will prevent persistent pegging of even higher frequencies and instead consume various amounts of power in various scenarios depending on your usage and consume even less when a specific task has completed and immediately drops the load.

This also applies to screen off states but that goes back to what was explained in this post regarding high vs low sampling rates and how they can greatly increase idle times depending on your screen off max.


https://copy.com/VMuyGiGJbxIc



Lucretia by @CamFlawless

Quote:

The name draws inspiration from a Megadeath song with the same title. Great tune.


Balanced
This profile is based on my V1 of Lucretia and seeks to strike a balance in terms of performance and battery life. Offering exceptional performance and a fluid experience, Lucretia Balanced is a great profile for all your needs.

Performance
This profile is based on my V2 of Lucretia and is intended for those seeking high performance from their devices for the likes of gaming and such. Lag should be non-existent and your experience should be smooooooth.

https://copy.com/sjCgexEGB1jo



Project Daylight v2 by @mamba720027 (updated: 12~23~13)

Quote:

Day Light is focused mainly on battery conservation. I felt that its useless if its not smooth and lags alot so I add performance into the mix createing a profile that offers both while its first and foremost goal "battery performance" is still preserved and not diminish. This profile is yet unique and on a different level from my early release of "Icarus"

The contents are 3 profiles unique in their own way, "Daylight", "Daybreak" and "Experimental" along with a "Extra" folder containing wallpapers I created on our S4 for fun while testing . Kind of gives me some inspiration and sense of feel of what my objective is.

Daybreak is a crossbread profile of my Icarus Performance profile and Daylight. Its simply utilizing the performance power behind Icarus Performance profile while useing Daylight profile governor settings as its core to boost battery performance

The experimental profile is heavily undervolted/Underclocked with tweaked scheduler and governor. I taught if some of you could run it stable then it may produce great or mix results

https://copy.com/2vBCFVZP68gV



Project Icarus by @mamba720027

Quote:

So some may wonder why the name "Icarus",why not Hyper Performance or Deadly Good Battery.
Well the reason and to begin explination,short history.
Icarus is a greek mythology who is seen today as a mythical pioneer that tried to conquer the skies.
I like that mythology cause it kinda corresponds to my own saying "fly high or fall hard" which means to aim high or fail trying. So their you have it folks and thus the profile name "Icarus".

And onto explination of each profiles.

The first is "Performance" which is catered for straight out performance with also good battery performance.
This one is for when u dont give a rats flying balls about battery really and just want everything super fast and smooth. But you maybe surprise of battery performance. I recommend everyone try this profile first. My current favorite

The second is "Conservative" this is for those seeking performance but also better battery performance than the first.
This one is the middle man or lady as u may want to refer to it. It gives the best of both worlds,performance and battery. So if the first leave you stranded then fear not, this is the one to turn too

The third is "Kamikaze" which means "god wind". It either knocks the daylight out of your Galaxy S4 due to its high undervolteing and mean intent on Battery Performance but still snappy.
This one the undervolting is of my personal voltage table that runs stable for me with other tweaks. If it runs successfully for anyone else then battery performance may be great.
This one is for those that likes the thrill of trying something new and unsure if it will work

https://copy.com/87kzjPQShn3Z



Sleeping Dragon by @mamba720027 (updated: 12~23~13)

Quote:

Sleeping Dragon V2.1 Single Core
This is a single core profile aimed at consumeing the least battery for a time when you will be away from home or at work and away from the charger. It was a profile i played with at first as i did not expect it to mount as much with apps and system UI needing a right amount of performance from a CPU to meet todays tasks in performance. In the end i was able to tame the dragon and make it work as best as possible to achieve its goal

Sleeping Dragon V1.2 Quad-Core
This is the counter part of Sleeping Dragon Single Core but with many tweaked parameters to make it a fully functional 4 Core base profile in hopes to achieve close or same battery performace as its single core entity. Unfortunately i still am not sure if it measures up but what i know from previous test with settings @Stock it hold its own in battery department. I am pleased with the results although i would wish to see some light usage results from users. I am pleased to present users with this 4 Core or Quadcore profile

https://copy.com/vkDfMNiu2Sbs










If you'd like to contribute to the Ktweaker Shop all you need to do is post a profile/script you want to share and include a brief description of it's purpose. It will then be tested thoroughly by the community and based on feedback will be submitted here in the Shop for approval and sent out to the dev for confirmation on adding to the Shop in Ktweaker!








Useful Links



Information about our scripts/profiles can be found HERE

Interested in learning how to fine tune the kernel but not sure of where to start?
Please refer to this Ktweaker User Guide (thanks to @Perseus71) and you'll be tweaking in no time!


What in the world are CPU block cycles? Please check HERE

HERE is a great app by @elesbb that will allow the end user to set individual governor options for Ktoonservativeq when turning on the screen, charging, keyboard typing, or playing media.

Link to downloadable zip for all available ktweaker Profiles (Thanks to @CamFlawless)
https://www.copy.com/s/EhjYpSmACIyz
Last edited by LuigiBull23; 4th August 2014 at 09:35 PM.
The Following 52 Users Say Thank You to LuigiBull23 For This Useful Post: [ View ]
6th August 2013, 04:29 AM   |  #8  
mamba720027's Avatar
Senior Member
Thanks Meter: 1,570
 
1,281 posts
Join Date:Joined: Sep 2010
Profile scripts
Post #8 is dedicated to Scripts that will be used with some profiles. I also added a section for current test profiles and old test/experimental profiles.

[[Quick information]]
These scripts will either control CPU Cores 2,3,4 or all 3 and are only intended to work with the Ktoonservativeq governor. They may bring performance improvements or battery improvements based on the script governor parameters and how well they function for each user's daily activities.



[[#Ktweaker Script Guide#]]

First I want to thank KT aka Ktoonsez for provideing us with his kernel and all the wonderfull features and options at our disposal to tweak and make all these profiles and script possible. Also for implementing the Ktweaker Shop into his Ktweaker app so that it would be more convenient and easy for users to utilize these custom profiles and script as to maximize users experience.

I also want to thank Luigi for letting me join his band of misfits and being part of the Shop community. This opportunity have help me to use my potential to provide profiles and scripts that users have come to enjoy and help further in the thread.

Also thanks to everyone else that is actively supporting in the thread, some that are working behind the scene to help provide improvements and better experience for everyone. Big thanks.


::#Beginning of Guide#::
Quote:

This is a quick step by step guide put together to help clear up any questions or help out those new to the Profile and Scripts section found in Ktweaker.

:#Before continuing take note#:
Swapping profiles and scripts you need to apply them in the following order first:
*Script first
*Profile Second
This order is to ensure Superuser Permission is given to both the script and profile.

Also note that you could choose to run a profile without the script. Running it with the script is optional. But for best results it's advised to first try the profile with the script it was intended to use with.
#
So now you're ready to try a script with your own profile or one from the shop but undecided as which to choose or how to go about loading the script.
#
Step#1
[[Chooseing a Script]]
To choose a script navigate to "Profiles and Script/Ktweaker Shop Scripts".
Here you will find a list of Scripts. Each script is named after its designated profile that it is intended to be used with. Choose one to view "ABOUT" which gives a brief description and additional information of the script and how it can be used with addition profiles. Some may or may not give this option to be used with other profiles as it may produce undesirable results but you are free to experiment.

Choose to download the script you want to use and in the "Profiles and Scripts" section choose "LOAD SCRIPT ON BOOT". This will allow the script to run on every boot of the device once their is a script loaded.

On the go you could also choose to load another script then apply another profile in this order as to let Ktweaker give both the script and profile SU permission to run.

Step#2
[[Chooseing a profile]]
Decide on how you want to use your device for the specific day,occasion or you may just want to set it and forget it based on being a performance user, conservative or needing a Balance of both to suit your demanding needs. You could also just be curious and want to try them all to see what works for you.

So open the Ktweaker app. Navigate to the "profiles and scripts" section.
Choose "ktweaker Shop Profiles" to bring up a list of profiles avaliable to you.
Here you can choose to view "ABOUT" which gives a brief profile description as to help you decide if the profile fits what you're looking for. You can also choose to view "ADJUSTMENTS" to see the tweaked parameters of the profiles or choose the option to "DOWNLOAD" the profile which will be saved in the ktweaker folder on your internal storage.

Now that you have chosen a profile,downloaded it and want to apply it. In the profiles and script section choose "RESTORE PROFILE FROM SDCARD" and you're done.



[[ Script Download Section]]

Dead by April V2.2 Script
Quote:

This script utilizes the Conservative governor for CPU1. It was decided to apply this to the 2nd core and leave the others at default interactive in order to better serve battery life while still maintaining the only true performance aspects of the profile within the other cores. However, as CPU1 serves more priority over any other remaining cores, this governor was tweaked with slight performance enhancements as to allow for a faster ramp up to max CPU for that core during middle to heavy operation levels but will scale back down almost instantly and thus maintaining it's goal of keeping things low as often as possible, conserving battery. It's highly recommended to use with a balanced or straight performance profile very similar to Dead By April if applying this to any other profile.
Created by: LuigiBull23



Dead by April V3 Script
Quote:

Core 1 - Conservative
Core 2 - asswax
Core 3 - interactive
A more detailed description about this script will be updated when the script is official.
Created by: LuigiBull23



Balanced Bull Reloaded Script
Quote:

This script applies the Asswax governor to cpu1, Intellidemand to cpu2, and Adaptive to cpu3. Much like the profile it's twealed to focus on a direct balance between performance and battery. With the utilization of these 3 governors, CPU will spend less time at higher frequencies making scaling less aggressive during light to moderate activity but use the on demand performance of Intellidemand during performance critical situations, such as in game.
It can be used with other profiles much like this one in which uses moderate thresholds as well as a touch boost of 1134 or greater. As always redults will vary.
Created by: LuigiBull23



Smooth Operator V3 Scripts
Quote:

This Smooth Operator script uses the Abyssplugv2 governor for Core1 ,badass for Core 2 and Adaptive for Core3. Each governor is set as to not scale too quickly nor too aggresively. The smooth operator profile on the other hand was tweaked with parameters to allow these cores to run when it is truely needed and to deliver performance with the right amount of cores online and save on battery.
So on another profile this script could deliver performance or save on battery depending on how the profile is tweaked. It's Characteristics will vary. It would be interesting to see how it performs with a performance base profile



Smooth Operator Infinity
Quote:

Core 1 - Intellidemand
Core 2 - Intellidemand
Core 3 - Intellidemand
This script was tweak to work as a univeral and future here forth along side the 3 profiles smooth operator V5, Lite and Ultra.Thus the name "Infinity" at the end. The older scripts are also welcome to be used with these as users favor or see fit.
Created by: Mamba720027



Hydra script
Quote:

This script uses the Dancedance governor for CPU1, Wheatley for CPU2, and Badass for CPU3. This script focused mostly towards battery conservation with some performance elements. With the high ramp rates of Dancedance and Badass's limited frequency logic, the script will bias the CPU at low frequencies and will scale up conservatively or immediately shift to an optimal frequency, depending on the task at hand if or when a larger and more persistant load is placed on the CPU. Wheatley will act more as the "On demand" partner here for that extra call in performance such as in games but for the most part the last 2 cores will remain off due to the adjustments within the profile.
This can also be used alongside other profiles but is recommended to apply to those similar to Hydra in which serves as a balance between battery and performance or one that merely performance oriented.
Created by: Luigibull23



Stardust Script
Quote:

This Stardust script uses the badass governor for Core 1 and 2 while Core 3 uses the intellidemand governor.
This script was put together specifically for the Stardust profile as it is a profile based on the AbabyssplugV2 that utilizes the Autohotplugging feature in Ktweaker. This method of hotplugging was too aggresive to acquire the desired results needed to conserve on battery so I put together this stardust script as my other option to limit the scaleing up frequency for Core 1,2 and 3. Each respective governor limits the scaleing of their assigned core to a specific frequency which can be seen useing a software to monitor core activity. This way the script helps saves on battery as the same way the theory of underclocking applies.
So if you're gonna use this script on another profile I recommend it being on a performance or balanced profile as a already aggressively tweaked powersaveing profile may deem its outcome very laggy or sluggish.



Undisputed 3 Script
Quote:

This script utilizes the badass governor for CPU1, Intellidemand, and Asswax for CPU3. Much like the Balanced Bull Reloaded script this is a balance between battery and performance. The only mere difference is that this script ALONE is slightly more battery conservative compared to BBR but results will obviously vary, especially depending on the profile this is used with.
It can be used alongside other profiles such as Balanced Bull Reloaded as the these 2 are very similar.
Created by: LuigiBull23



Crimson Dragon V2 Script
Quote:

This Crimson Dragon script utilizes the wheatley governor for Core 1, intellidemand for Core 2 and Dancedance governor for Core 3.
The script is focus to use these 3 cores as to help conserve on battery threw the wheatley and dancedance governor while provideing ondemand performance useing Intellidemand.This script should work best with the Crimson Dragon profile but could also be used on similar profiles that's focus on delivering a balance between battery and performance.



Sleeping Dragon Quad- Core Script
Quote:

This Sleeping Dragon quad-core script uses the intellidemand as core 1, Adaptive as Core 2 and Asswax as Core 3. Asswaxing is probably not for everyone but whatever works right. It works wonderful for Core3 here. Anyways these 3 governor helps mainly to Balance battery and performance here as with Sleeping Dragon profile it is tweaked in a way to keep things smooth/performance enough without scaleing the cpu too high frequently and extend the battery usage per cycle.
So this script you could try it with other profiles as well that have a touch boost value higher than 810mhz implemented to simulate a similar output that Sleeping Dragon profile and script combine produces or evin better with this script



Day Break V2 Script
Quote:

This Daybreak script uses the Adaptive governor for Core 1,dancedance for Core 2 and intellidemand for Core 3. Each of these governor is tweaked to scale each core more of on-demand as to provide fluidity and performance to the Daybreak profile because of its high conservative property. Thus this script makes it possible to add performance into a profile that may not scale aggressively to highest frequencys often as to maintain battery conservativeness.
This script could also be used with similar profiles that fits similar description as Daybreak or shows similar properties threw monitoring of the profile to learn it's characteristics



Day Light V2 Script
Quote:

This Daylight Script uses the dancedance governor for both core 2 and 3 as core 4 is locked offline in the daylight profile. The script delivers a fast rampup of speed boost and quickly sends the cores back offline to help the profile remain true to its severe battery saveing properties.
This script could also be used with other profiles that have the cpu underclocked to help maintain battery conservative fairness.



Lateralus Script
Quote:

This profile uses
- CPU1 = Badass
- CPU2 = Conservative
- CPU3 = Adaptive
The governors for each cores tend to keep things on the conservative side. Its a script with potential to tweak upon and use as a base.
The combination of this script along with any profile should provide a good user experience in terms of battery.
Created by : CamFlawless



SRV V2 Script
Quote:

The script is trying to keep the philosophy of the SRV profile therefore for Core 1 wheatley governor is used and intellidemand is used for Cores 2 and 3. Works best with SRV profile or any profile with ktoonservativeq or wheatley governor for Core 0.


3hands Script
Quote:

- CPU1 = intellidemand
- CPU2 = abyssplugv2
- CPU3 = dancedance



●Ragnarok Script ●
Quote:

- CPU1 = Asswax
- CPU2 = Wheatley
- CPU3 = abyssplugv2
This script is tweak to work along side the Ragnarok profile to help balance out performance and battery conservativety.



[[Experimental Profiles]]
This section all old or new test and experimental profiles will be deposited and accessed by anyone to try or test and provide feedback by PM to the respective profile creators.

New Test and Experimental

Old Test and Experimental


This section covers preset scripts geared to help save battery and deliver performance on almost any available profile with or without an available script. These scripts also give users the ability to mix and match profiles with a wider variety of scripts of their own choosing which in-turn delivers the result they desire.
It is very important to read the description of each scripts before trying one as they contain important information to help have a successful experience.

Profiles not mention in the recommended list of each scripts are still ok to be used with any of the scripts providing you read the description before proceeding . Scripts marked with a ES (Energy Saveing) symbol means dureing my test run doing medium/heavy usage i was able to achieve screen usage times of 5 hours and higher. This does not guarantee same results for users but a guideline to follow and try.


General Battery Saveing Scripts Presets


*Conservative Preset 1
Quote:

The following governors are assigned to each core
Core 1 - Badass
Core 2 - Adaptive
Core 3 - Conservative
This script should work on just about any profile but should not be pared along with a profile useing any of the governors assigned to core 1-3.

Some recommend profiles tested on to use with are
-3hands
-Asking Alexandria
-Daybreak
-Lateralus
-Sleeping Dragon Quadcore
- ¤Skyline Profile¤ llllll
- ¤Skyline Profile¤ llllllll
- Ktoonsefied
- Ktoonsefied Mod
- Rebirthing
- Whispers in the Dark

*Conservative Preset 2
Quote:

Each cores consist of the following governors
Core 1 - Asswax
Core 2 - Badass
Core 3 - Abyssplug V2
This script should work on just about any profile but should not be pared along with a profile useing any of the governors assigned to core 1-3.

Recommended Profiles tested on to use with are
- Daybreak
- Ktoonsefied
- Ktoonsefied Mod
- ¤ Skyline Profile¤
- Whispers in the Dark ES
- Lateralus



*Conservative Preset 3
Quote:

Core 1 - SmartassH3
Core 2 - Dancedance
Core 3 - Adaptive
::Note::
This script keeps the cores scaleing frequency very low to save on battery. It is not recommended to be use if you play games that require a lot of cpu power.This script should work on just about any profile but should not be pared along with a profile useing any of the governors assigned to core 1-3.

Recommended profiles tested on to use with are
- ¤Skyline Profile¤ l
- ¤Skyline Profile¤ ll ES
- ¤ Skyline Profile¤ lll
- ¤Skyline Profile¤ lllll
- ¤Skyline Profile¤ llllll
- Whispers in the Dark
- Bat Pig ES
- Crimson Dragon V3
- Icarus Conservative V2
- Misanthrope
- Balanced Bull Reloaded
- Dead by April V2.2
- Ghost Rider 1.0
- Hydra
- KT Gameing
- Ktoonsified V5
- Lucretia Balanced
- Lucretia Performance
- Notorious
- Project Daylight Experimental
- Project Icarus Conservative
- Project Icarus Kamikaze
- Project Icarus Performance
- Rebirthing
- Smooth Criminal
- Undisputed 3
- Sleeping Dragon Quad - Core



Conservative Preset 3 V2

Quote:

The following Cores are assigned:
Core 1 - Asswax
Core 2 - Dancedance
Core 3 - Adaptive

This updated version of the script brings asswax governor to be uses as core 1 while the other cores uses same governors as V1 but with updated tweaked parameters to help manage core activity more efficiently to extend your battery usage per cycle. This script was tested extensively on the profile Smooth Operator Lite V2 as a substitute to help extend battery performance. It will also work along side any other profiles based on the ktoonservativeq governor.



*Conservative Preset 4
Quote:

Core 1 - Wheatley
Core 2 - Wheatley
Core 3 - Wheatley
This script was tweaked to provide a balance between battery and performance. This script should work on just about any profile but should not be pared along with a profile useing the Wheatley governor.

Some profiles tested on and recommend to be tried with are
- ¤Skyline Profile¤ lllll ES
- ¤Skyline Profile¤ llll
- ¤Skyline Profile¤ lll
- ¤Skyline Profile¤ llllll
- Whispers in the Dark
- Crimson Dragon V3



*Conservative Preset 5
Quote:

Core 1 - Adaptive
Core 2 - Adaptive
Core 3 - Adaptive
This script was tweaked to keep a balance in performance and battery using the Adaptive governor for the 3 cores.
This script should work on just about any profile but should not be pared along with a profile useing the Adaptive governor.

Some recommended profiles it was tested on are
- ¤Skyline Profile¤ llllll
- ¤Skyline Profile¤ lllll ES
- ¤Skyline Profile¤ llll
- Sleeping Dragon Quad-core
- Crimson Dragon V3 ES



*Conservative Preset 6
Quote:

Core 1 - Asswax
Core 2 - Asswax
Core 3 - Asswax
This script is tweak to be used with a balanced or performance based profile such as the "Rebirthing" profile where the CPU polls very quicky and cpu ramps up frequently. It is aimed at keeping the rest of cores activity to a minimum and use lower clock frequencies as often as possible to help reduce battery drain and provide a better experience.This script should work on just about any profile but should not be pared along with a profile useing the Asswax governor.

Profiles tested on are
- Rebirthing ES
- whispers In the Dark
- Crimson Dragon V3




General Performance Scripts Presets

*Performance Preset 1
Quote:

All 3 cores are controlled by the wheatley governor. This script should work on just about any profile but should not be pared along with a profile useing the Wheatley governor.

Recommend profiles tested on to use with are
- Sleeping Dragon Quad-Core
- ¤Skyline Profile¤ ll
- ¤Skyline Profile¤ llllll
- Icarus Performance V2



*Performance Preset 2
Quote:

Core 1 - SmartassH3
Core 2 - Dancedance
Core 3 - Adaptive
This profile was tweaked to maximize overall performance.
This script should work on just about any profile but should not be pared along with a profile useing any of the governors assigned to core 1-3.

Recommended profiles tested on to use with are
- ¤Skyline Profile¤ l
- ¤Skyline Profile¤ ll ES
- ¤Skyline Profile¤ llllll
- Icarus Performance V2



*Performance Preset 3
Quote:

Core 1 - Dancedance
Core 2 - intellidemand
Core 3 - Abyssplugv2
This script was tweak to have cores 1&2 scale very quickly delivering performance on demand while the last core 3 works in a slight conservative manner and not too very aggressive although it will still deliver excellent performance considering the nature of governor assigned.This script should work on just about any profile but should not be pared along with a profile useing any of the governors assigned to core 1-3.

Some recommended profiles tested on to use with are
- Icarus Performance V2



*Performance Preset 4
Quote:

Core 1 - Asswax
Core 2 - Adaptive
Core 3 - Abyssplugv2

This was tested on unknown profiles with incomplete data entry. It should work on just about any profile but should not be pared along with a profile useing any of the governors assigned to core 1-3.



*Performance Preset 5
Quote:

Core 1 - Abyssplugv2
Core 2 - Abyssplugv2
Core 3 - Abyssplugv2

This was tested on unknown profiles with incomplete data entry. It should work on just about any profile but should not be pared along with a profile useing the Abyssplugv2 governor.



Performance Preset 6
Quote:

Core 1 - Interactive
Core 2 - Interactive
Core 3 - Interactive

This script is tweaked to deliver a more fluid performance oriented interactive governor experience. Do not use this script if useing interactive as the primary governor at Core0. Will work nicely with any other governors such as ktoonservativeq and the rest found in ktweaker.


~~Screen Brightness Adjustments To Save Power~~

=[[Lux Autobrightness]]=

I use the app Lux Autobrightness to set the screen brightness of my device. I find it helps to miminize power consumption used by the screen and taught of shareing my profile.

To use this profile just download it from the provided link below. Be sure to backup your current LUX profile settings. Useing a file manager,navigate to the "Lux" folder on your internal storage and rename your current profile to "lux_profiles.bak". Then move the downloaded profile to your "Lux Folder" and restore it from within the Lux app.

You may want to set your method of backlight adjustment to "ON WAKE" as i have or leave it to your own desire preference as their are 4 to choose from which can be found by running the Lux App settings wizard or by going into settings/brightness and chooseing one of the 4 prefered method of backlight adjustment.

Lux Autobrightness Profile 1 Download
Quote:

This lux profile is more of a balanced brightness to make the screen not too dark or bright under various light conditions.



Lux Autobrightness Profile 2 Download
Quote:

This profile is adjusted with lower brightness values and takes more of a gradual step to make the screen brighter compare to the above profile 1

.


Lux Autobrightness Profile 3 Download
Quote:

This Profiles uses higher screen brightness percentage as its min and upward lux thresholds to deliver a more alive and vivid screen viewing experience in just about any surrounding with little to maximum ambient lighting source. This profile is not as conservative as profile 1 or 2 but will deliver exceptional experience.



TIP
To help lower the screen power consumption along with the lux profile,leave the "Screen Power Saveing" mode feature turned on in your Rom power saveing mode section.
Last edited by mamba720027; 7th July 2014 at 03:30 PM.
The Following 28 Users Say Thank You to mamba720027 For This Useful Post: [ View ]
9th August 2013, 04:31 PM   |  #9  
shenry1307's Avatar
Senior Member
Wherever Evil Lurks!
Thanks Meter: 87
 
274 posts
Join Date:Joined: Aug 2010
More
Thumbs up Nice!
Great work, Luigi my friend!!! Not driving an S4 yet, but I like to keep up with emerging trends and new technology...
Besides, I'll support you anytime!
The Following User Says Thank You to shenry1307 For This Useful Post: [ View ]
9th August 2013, 04:51 PM   |  #10  
LuigiBull23's Avatar
OP Recognized Contributor
Flag Holyoke
Thanks Meter: 5,430
 
5,627 posts
Join Date:Joined: Jan 2013
Donate to Me
More
Quote:
Originally Posted by shenry1307

Great work, Luigi my friend!!! Not driving an S4 yet, but I like to keep up with emerging trends and new technology...
Besides, I'll support you anytime!

Thanks buddy!! Hopefully when and if you get the S4 this thread will come of use to you

The Following User Says Thank You to LuigiBull23 For This Useful Post: [ View ]
Post Reply Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in T-Mobile Samsung Galaxy S 4 General by ThreadRank