[ROM][SPH-L900/T0LTESPR][JB][4.3] CyanogenMod 10.2 official nightlies

Search This thread

doubleu

Senior Member
Jun 8, 2006
153
33
Does anyone know if we'll see RCs for 10.2 like we did for 10.1.3? This last build (1210) has issues; the same 'can't connect to camera' issue that CM11 does. And obviously very minor, but the "circle with percentage" battery graphic, the percentage isn't aligned correctly. I spent the morning doing a fresh install with CM10.2-1210 to see if a fresh install helped with these minor nagging issues, but no go. Anyone know how to get older 10.2 builds? I'd like to go back and try a late-November build again...
 

t4d73

Senior Member
Sep 28, 2011
2,486
567
Does anyone know if we'll see RCs for 10.2 like we did for 10.1.3? This last build (1210) has issues; the same 'can't connect to camera' issue that CM11 does. And obviously very minor, but the "circle with percentage" battery graphic, the percentage isn't aligned correctly. I spent the morning doing a fresh install with CM10.2-1210 to see if a fresh install helped with these minor nagging issues, but no go. Anyone know how to get older 10.2 builds? I'd like to go back and try a late-November build again...

Someone correct me if I'm wrong but I think the builds for 4.3 are over.

Sent from my SPH-L900 using xda app-developers app

---------- Post added at 06:25 PM ---------- Previous post was at 06:23 PM ----------

Yeah if you just look back 1 page you'll see it's over man.

Sent from my SPH-L900 using xda app-developers app
 

doubleu

Senior Member
Jun 8, 2006
153
33
Someone correct me if I'm wrong but I think the builds for 4.3 are over.

Sent from my SPH-L900 using xda app-developers app

Ok, that's what I was fearful of, thanks for the info. I'm just not ready for CM11 just yet until the minor bells-and-whistles get added, like small AM/PM on the status bar, etc.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 36
    CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (JB), which is designed to increase performance and reliability over stock Android for your device.
    Code:
    #include 
    /*
     * Your warranty is now void.
     *
     * I am not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at me for messing up your device, I will laugh at you.
     *
     * Submitting bug reports on nightly builds is the leading 
     * cause of male impotence.
     */

    CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

    All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.

    INSTRUCTIONS
    First time installing CyanogenMod 10.2 to your Galaxy Note 2 L900, or coming from another ROM:
    - Read known issues ans FAQs
    - Flash the latest official ClockworkMod-Recovery
    - Copy GApps and CM10.2 ZIPs to your SDCard
    - Boot into Recovery
    - Flash CM10.2 zip from SDCard
    - Flash GApps zip from SDCard
    - DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
    - Reboot
    - Don't restore system data using Titanium Backup!
    - Restoring Apps + Data might cause problems and is not recommended, avoid it if possible!

    Upgrading from earlier version of CyanogenMod 10.2:
    - Copy CM10.2 ZIP to your SDCard
    - Boot into Recovery
    - Flash CM10.2 zip from SDCard
    - Reboot

    Upgrading from CyanogenMod 10:
    - Read known issues ans FAQs
    - Copy GApps and CM10.2 ZIPs to your SDCard
    - Boot into Recovery
    - Flash CM10.2 zip from SDCard
    - Flash GApps zip from SDCard
    - Reboot
    - Wipe data of clock app
    - Reset everything under Settings -> Date & Time otherwise editing alarms might cause FCs

    DOWNLOADS
    CM10.2 official nightly builds:
    http://www.get.cm/?device=l900

    Google Apps:
    http://goo.im/gapps

    CHANGELOG
    http://changelog.bbqdroid.org/#l900/cm10.2/next

    BUG LIST
    -GPS: To get a lock using the new opensource gps use the workaround provided by Kejar: http://xdaforums.com/showpost.php?p=39761558&postcount=702
    -BT Voice Search
    -5ghz wifi - seems to only work with low channels
    -Minor graphical issues (occasional black screen)

    Common t0lte issues: http://teamhacksung.org/wiki/index.p...y:Known_issues
    Frequently asked Questions: http://teamhacksung.org/wiki/index.p...0.1:t0lte:FAQs
    Wiki: http://teamhacksung.org/wiki/index.php/Main_Page

    TEAMHACKSUNG SUPPORT CHAT
    Webchat: http://webchat.freenode.net/?channel...cksung-support

    Server: chat.freenode.net
    Channel: #teamhacksung-support

    Don't expect any support if you:
    - are not running stock cm-kernel
    - have installed any mods
    - have modified system files


    DEAR KANGERS
    If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
    This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
    Open-Source doesn't meant Out-of-Respect!!!
    25
    CM11 is being pushed to GitHub!

    Sent from my Nexus 7 using Tapatalk 4

    I created the cm-11.0 branches for the cdma note 2's. I'll start building in the morning and see how broken we are :p

    Sent from my SCH-I605 using xda app-developers app
    11
    Hey Scott,

    I was experimenting on creating my own build from source for 4.4 so I could help/contribute if needed.

    When I ran breakfast l900 for cm11, I was able to use the branch for android_device_samsung_l900, but then it stopped with this message:


    build/core/product_config.mk:238: *** _nic.PRODUCTS.[[device/samsung/l900/cm.mk]]: "vendor/samsung/smdk4412-common/common-vendor.mk" does not exist. Stop.

    ** Don't have a product spec for: 'cm_l900'
    ** Do you have the right repo manifest?

    Am I missing something or am I jumping the gun on making the new build?

    Thanks

    missing the samsung vendor repo, its on github but under theMuppets.

    Anyways here's a cm11 build: http://www.androidfilehost.com/?fid=23212708291675622
    usual disclaimer, flash in CWM 6043 or higher (a must or risk losing 3g/4g). Asserts might be screwy so let me know if it errors trying to install, might just need to remove the top 3 assert lines from the updater script
    I'll start an official thread next week when I work a few more things out. MAKE A BACKUP FIRST!!
    10
    seems it was an incorrect build.prop setting that changed from 4.2 to 4.3 that affected the graphics. should be much better in next nightly thanks to arcee

    Sent from my SCH-I605 using xda app-developers app
    8
    there have been alot of ril changes lately out of my control but in the end we will get it working.

    Sent from my SCH-I605 using xda app-developers app