[COLLECTION][GUIDE] HTC M7 RUU, OTA, and Stock Nandroid Downloads

Search This thread
By:
Advanced…
S

sani_khan

New member
Jun 6, 2016
2
0
badly need help for my htc one m7(imei and baseband has gone)

i am using a htc one m7 mobile. my mobile lost its imei and base band service a week ago . i tried in many ways. but i couldnt repair it. i unlocked it and installed twrp for recovery. than tried to install superSU.zip and reboot , then my mobile hangs after showing htc. what shoud i do and which RUU should i select ???

here is full specification of my phone

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.51
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH356W903949
(bootloader) imei: 354436056232679
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4298mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.083s

C:\sdk-tools\sdk-tools>
 
A

alray

Inactive Recognized Contributor
May 22, 2012
8,932
3,593
sani_khan said:
i am using a htc one m7 mobile. my mobile lost its imei and base band service a week ago . i tried in many ways. but i couldnt repair it. i unlocked it and installed twrp for recovery. than tried to install superSU.zip and reboot , then my mobile hangs after showing htc. what shoud i do and which RUU should i select ???

here is full specification of my phone

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.51
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH356W903949
(bootloader) imei: 354436056232679
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4298mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.083s

C:\sdk-tools\sdk-tools>
Click to expand...
Click to collapse
You probably flashed an outdated version of supersu hence why the Bootloop. Flash the 7.19.401.51 ruu from the ruu collection thread.
(not this one, see the sticky threads)

Sent from my HTC One using XDA Labs
 
D

diezel87

Member
May 31, 2016
10
0
Hello, can someone help to upgrade my HTC M7 AT&T to lollipop, thx. ( I dont live in usa)
What RUU I need to use?


Information:

Android 4.1.2

***RELOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT- 1. 44. 0000
RADIO-4A. 14. 3250. 13
OpenDSP-v26. 120. 0202
eMMC-boot
May 3 2013, 19: 16: 59: – 1

Fastboot getvar all:

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4008mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.047s
 
A

alray

Inactive Recognized Contributor
May 22, 2012
8,932
3,593
diezel87 said:
Hello, can someone help to upgrade my HTC M7 AT&T to lollipop, thx. ( I dont live in usa)
What RUU I need to use?


Information:

Android 4.1.2

***RELOCKED***
M7_UL PVT SHIP S-ON RH
HBOOT- 1. 44. 0000
RADIO-4A. 14. 3250. 13
OpenDSP-v26. 120. 0202
eMMC-boot
May 3 2013, 19: 16: 59: – 1

Fastboot getvar all:

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.26.502.12
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4008mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.047s
Click to expand...
Click to collapse

Already explained you what you should do last week in this post
If its unclear, don't hesitate to ask more questions. :good:
 
D

diezel87

Member
May 31, 2016
10
0
alray said:
Already explained you what you should do last week in this post
If its unclear, don't hesitate to ask more questions. :good:
Click to expand...
Click to collapse

If its not connected to the at&t network then you should consider to make it S-OFF (pretty easy to do on hboot 1.44 and also free) and convert it to a debranded version (change the CID, update the firmware and flash a 7.xx.xxx.x ruu) like the developer edition (7.17.1540.51) or WWE edition (7.19.401.51)
Click to expand...
Click to collapse


I thought I could use a RUU without convert my phone to a debranded version. Anyway my phone its not connected to the at&t network, I know how to make it S-OFF but I dont know how convert it to a debranded version, Can you help me with that?

Thanks a lot and sorry for the inconvenience.
 
A

alray

Inactive Recognized Contributor
May 22, 2012
8,932
3,593
diezel87 said:
I thought I could use a RUU without convert my phone to a debranded version.
Click to expand...
Click to collapse
Like I've said in the other thread:
First your firmware is really old and because of that you can't directly flash a 7.xx.xxx.xx RUU.
Click to expand...
Click to collapse
Anyway my phone its not connected to the at&t network, I know how to make it S-OFF but I dont know how convert it to a debranded version, Can you help me with that?

Thanks a lot and sorry for the inconvenience.[/QUOTE]

Sure I'll help you.
  1. Go ahead and make S-OFF
  2. Download this firmware and this RUU and save both files in your abd/fastboot folder
  3. Change your CID from CWS__001 to 11111111 (8 times "1"):
    Boot your phone in bootloader mode then open a cmd window from your adb/fastboot folder and type:
    Code: 
    fastboot oem writecid 11111111
fastboot reboot-bootloader
  4. Then you'll have to update your firmware so your phone can accept the latest RUU:
    With your phone still in bootloader mode:
    Code: 
    fastboot oem rebootRUU
    your phone will reboot in RUU mode, a black screen with silver HTC logo. Once in RUU mode, flash the firmware:
    Code: 
    fastboot flash zip Firmware_6.07.1540.2.zip
fastboot flash zip Firmware_6.07.1540.2.zip
fastboot reboot-bootloader
    Note that you'll have to do the "fastboot flash zip" command twice.
  5. With the phone in bootloader mode, launch the RUU program and follow instructions. Once flashed, your phone will reboot to the OS and you'll be on the latest version.
 
D

diezel87

Member
May 31, 2016
10
0
alray said:
Like I've said in the other thread:

Anyway my phone its not connected to the at&t network, I know how to make it S-OFF but I dont know how convert it to a debranded version, Can you help me with that?

Thanks a lot and sorry for the inconvenience.
Click to expand...
Click to collapse

Sure I'll help you.
  1. Go ahead and make S-OFF
  2. Download this firmware and this RUU and save both files in your abd/fastboot folder
  3. Change your CID from CWS__001 to 11111111 (8 times "1"):
    Boot your phone in bootloader mode then open a cmd window from your adb/fastboot folder and type:
    Code: 
    fastboot oem writecid 11111111
fastboot reboot-bootloader
  4. Then you'll have to update your firmware so your phone can accept the latest RUU:
    With your phone still in bootloader mode:
    Code: 
    fastboot oem rebootRUU
    your phone will reboot in RUU mode, a black screen with silver HTC logo. Once in RUU mode, flash the firmware:
    Code: 
    fastboot flash zip Firmware_6.07.1540.2.zip
fastboot flash zip Firmware_6.07.1540.2.zip
fastboot reboot-bootloader
    Note that you'll have to do the "fastboot flash zip" command twice.
  5. With the phone in bootloader mode, launch the RUU program and follow instructions. Once flashed, your phone will reboot to the OS and you'll be on the latest version.
[/QUOTE]

Thanks a lot man, but I have another question :)
I'm stuck making my phone S-OFF, I thought I could use Revone to make it but seems is not available anymore, What other tool can use to make it S-OFF ?

Thanks a lot again!!!!
 
T

tecknice

Member
Feb 2, 2015
18
0
RUU 1.28.401.7 corrupted inside (MD5 is good)

CORRUPTED OR NOT?

RUU M7 UL JB 50 HTC Europe 1.28.401.7 Radio 4A.13.3231.27 10.31.1131.05 Release 310878 Signed
is CORRUPTED inside. Maybe is it encrypted nowadays...

I downloaded it twice from Guru website and checked the MD5 (2fd46305b6080830e2ca27a080999b93). Everything is good.

Then launching the RUU and waiting to find files on /temp directory (because I need to copy rom.zip).

When I try to unzip "rom.zip" from /temp folder, few files stays corrupted such as "android-info.txt". From The average 900MB, only 20MB are unzip... Winzip message says "the archive is corrupted"

Can someone try the RUU ? Or can someone tell me how to decrypt if this is the reason...
Please :fingers-crossed:
 
Last edited:
A

alray

Inactive Recognized Contributor
May 22, 2012
8,932
3,593
diezel87 said:
What other tool can use to make it S-OFF ?

Thanks a lot again!!!!
Click to expand...
Click to collapse
Try rumrunner s-off

tecknice said:
CORRUPTED OR NOT?

RUU M7 UL JB 50 HTC Europe 1.28.401.7 Radio 4A.13.3231.27 10.31.1131.05 Release 310878 Signed
Click to expand...
Click to collapse

Signed = Encrypted
You can't open an encrypted zip like that, it must be decrypted using linux (ruuveal). If the md5 is good, simply flash the file on your phone (unless you only need a specific file inside the RUU which will require decryption)
 
  • Like
Reactions: tecknice
T

tecknice

Member
Feb 2, 2015
18
0
To Alray,
THANK YOU :) regarding your answer for "corrupted or not"...
Now I will try to find the way to ruuveal.
My goal is to add orang002 in info.txt to hopefully flash HTC ruu (if I could save the ruu in the same states afterwards...). I can't find a way to s-off 1.55 since rumrunner &co don't work anymore.
 
A

alray

Inactive Recognized Contributor
May 22, 2012
8,932
3,593
tecknice said:
To Alray,
THANK YOU :) regarding your answer for "corrupted or not"...
Now I will try to find the way to ruuveal.
My goal is to add orang002 in info.txt to hopefully flash HTC ruu (if I could save the ruu in the same states afterwards...). I can't find a way to s-off 1.55 since rumrunner &co don't work anymore.
Click to expand...
Click to collapse

You're wasting your time... You won't be able to re-sign the RUU once decrypted, only HTC can. So you'll end up having a decrypted and unsigned RUU. Flashing a an unsigned RUU requires S-OFF..... If rumrunner can't work, use Sunshine S-OFF and change your CID, it will be much simpler and faster than decrypting a RUU to mod the android-info.txt
 
E

eyfos

Member
Feb 24, 2015
6
0
Which RUU should I use ?

Hello everyone. Here is my problem, I recently moved out from my country to another one, and used a third party website to get a code to unlock SIM locking. Unfortunately the code didn't work because I was on custom ROM as the support told me. I'm now trying to go back to the original ROM in order to get the code to work.
Now, i'm having trouble trying to figure out which RUU.exe I should download.

Here are my CID/MID and more infos (using CID Getter app)

Code: 
cidlist : GOOGL01, 11111111, BS_US001, CWS_001, T-MOB010
maincid: GOOGL01
modelid: PN0713000, PN0712000, PN0714000, PN0710000, PN0711000
Back of the phone says : PN071000

Here are more informations on the bootloader :
Code: 
*** TAMPERED ***
*** UNLOCKED ***
M7_UL PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.55.0000
RADIO-4A.21.3263.04
OS-3.63.163.1

As I understood, since the phone is on S-OFF, I just have to launch the correct RUU.exe and it will do the job, right ? But I read a lot of things saying I could brick the phone, that's why i'm requesting help on which RUU I should download.
I can provide any more informations if needed.
I'd be really thankful if anyone could help me find the best way to get back to original stock ROM and be able to use my SIM unlock code.
Thank you !
 
A

alray

Inactive Recognized Contributor
May 22, 2012
8,932
3,593
eyfos said:
Hello everyone. Here is my problem, I recently moved out from my country to another one, and used a third party website to get a code to unlock SIM locking. Unfortunately the code didn't work because I was on custom ROM as the support told me. I'm now trying to go back to the original ROM in order to get the code to work.
Now, i'm having trouble trying to figure out which RUU.exe I should download.

Here are my CID/MID and more infos (using CID Getter app)



Here are more informations on the bootloader :


As I understood, since the phone is on S-OFF, I just have to launch the correct RUU.exe and it will do the job, right ? But I read a lot of things saying I could brick the phone, that's why i'm requesting help on which RUU I should download.
I can provide any more informations if needed.
I'd be really thankful if anyone could help me find the best way to get back to original stock ROM and be able to use my SIM unlock code.
Thank you !
Click to expand...
Click to collapse
Post the output of "fastboot getvar all" (hide imei and serialno). Info from cid getter are not reliable.
Your phone is s-off so you basically flash any ruu as long as it match with your mid (cid doesn't matters since your phone is superCid). Do you want to update the phone to the latest version at the same time? If you're going to use a Lollipop ruu, you'll need to update your firmware first.

Sent from my HTC One using XDA Labs
 
  • Like
Reactions: eyfos
E

eyfos

Member
Feb 24, 2015
6
0
[/HTML]
alray said:
Post the output of "fastboot getvar all" (hide imei and serialno). Info from cid getter are not reliable.
Your phone is s-off so you basically flash any ruu as long as it match with your mid (cid doesn't matters since your phone is superCid). Do you want to update the phone to the latest version at the same time? If you're going to use a Lollipop ruu, you'll need to update your firmware first.

Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse

Ah, I thought about CID Getter not being reliable, but tried it anyway..
Here it is
Code: 
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.163.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: 
(bootloader) imei: 
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4240mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks for your answer.
 
Last edited:
A

alray

Inactive Recognized Contributor
May 22, 2012
8,932
3,593
eyfos said:
[/HTML]

Ah, I thought about CID Getter not being reliable, but tried it anyway..
Here it is
Code: 
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.63.163.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: 
(bootloader) imei: 
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4240mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Thanks for your answer.
Click to expand...
Click to collapse

Do you want to update the phone to the latest version at the same time?
 
  • Like
Reactions: eyfos
E

eyfos

Member
Feb 24, 2015
6
0
alray said:
Do you want to update the phone to the latest version at the same time?
Click to expand...
Click to collapse

No I'm fine if I can do it later.
For now I downgraded hboot to 1.44 to install previous RUU but unfortunately W10 recognizes the phone in ADB but not when I go to Fastboot. I've been trying to find a driver for hours..
 
A

alray

Inactive Recognized Contributor
May 22, 2012
8,932
3,593
eyfos said:
No I'm fine if I can do it later.
For now I downgraded hboot to 1.44 to install previous RUU but unfortunately W10 recognizes the phone in ADB but not when I go to Fastboot. I've been trying to find a driver for hours..
Click to expand...
Click to collapse

hboot 1.44 being incompatible with windows 8 and above is a well known issue. Downgrading wasn't a really good idea, there are a lot of others options since the phone is s-off, like flashing the latest unbranded RUU version. Unfortunately now you'll have to find a way to use fastboot with hboot 1.44, either by using Windows 7, Linux, MacOS or this guide to get fastboot working on Win8+ and hboot 1.44

Once you get fastboot working I would suggest to convert from your vodafone .163 base to the international .401 base:

  1. update your firmware so your phone can accept the latest RUU:
    Code: 
    fastboot oem rebootRUU
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot flash zip M7_UL_Firmware_7.19.401.2.zip
fastboot reboot-bootloader
  2. flash the RUU:
    Code: 
    fastboot oem rebootRUU
htc_fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed.zip
fastboot reboot
    *** dont forget to use htc_fastboot for flashing the RUU.

Firmware: https://www.androidfilehost.com/?fid=95916177934534374
Ruu: https://www.androidfilehost.com/?fid=24369303960686231
htc_fastboot.exe: https://www.androidfilehost.com/?fid=24341993505161791

Download these 3 files and save in your adb/fastboot folder on your computer.
 
  • Like
Reactions: eyfos
You must log in or register to reply here.

Similar threads

BugsyLawson
  • Locked
[COLLECTION] HTC M7 RUU, OTA, and Stock Nandroid Downloads
Replies
1K
Views
832K
O_G
O_G
electronical
[GUIDE] Rumrunner S-Off for HTC One M7 International
Replies
1K
Views
713K
mitchst2
mitchst2
geek-baba
[Collection] HTC Dual Sim 802d, 802t, 802w - Official RUU, OTA and CWM
Replies
2K
Views
473K
hahmad78
hahmad78
S
[Collection][GUIDE] Lollipop 5.0.2 signed RUU.zip
Replies
817
Views
352K
H
High3
nintendolinky
[Discussion] HTC One - Updates
Replies
11K
Views
2M
RobeStar
RobeStar

Top Liked Posts

24 Hours All time

New posts