Post Reply

[ROM][P769] PenberRom5 [11/21/2013 - AROMA Edition)

OP leolawliet

1st September 2013, 09:27 AM   |  #1  
leolawliet's Avatar
OP Senior Member
Flag New York, NY
Thanks Meter: 1,070
 
2,633 posts
Join Date:Joined: Aug 2011
More
LeoLawliet presents..

- PenberRom5 -

Fine tuned and tweaked for better battery life, performance, smoothness, and responsiveness










This ROM is mainly based on PenberRom2, which I started working on at CM Forums.
To be honest the main difference between the two is PenberRom2 was based on PACman ICS 4.0.4, while PenberRom5 is based on PACman JB 4.3.
Other than that, the whole idea behind both ROMs is the same, a custom ROM based on my preference and what enhancements I use.
It's already tweaked and fine tuned, I saved you all the trouble of having to do it yourselves




Here's a list of what has been added:

Quote:

  • Smart Launcher included
  • Replaced DSP Manager with ViPER4Android FX
  • Supercharged services.jar (launcher stays in memory + better multitasking)
  • boost in performance
  • swap2cache terminal script creates a 64mb swapfile in /cache with swappiness set to 40
  • swap2data terminal script creates a 128mb swapfile in /data with swappiness set to 40
  • increased responsiveness
  • better battery life
  • faster boot
  • zipalign apk's on boot
  • defrag databases on boot
  • entropy tweak
  • I/O scheduler tweaks
  • sleeper tweaks
  • hardware rendering tweaks
  • improved sdcard read/write speed
  • disables logger
  • disables journalism
  • disables vsync
  • ADJ tweaks
  • vm tweaks
  • ram tweaks
  • graphics rendering tweaks
  • video/music streaming tweaks
  • various useful terminal scripts (I'll mark those down)
  • custom bootanimation + UI sounds
  • increased jpeg + video recording quality
  • 3D performance enhancement tweaks
  • call tweaks
  • scripts to clean database & zipalign apps
  • cpuramcheck script to monitor CPU/RAM usage in realtime using the terminal emulator
  • Stabilized FPS through a build.prop tweak (kinda risky, comment out if you have graphic glitches. Thanks LENAROX!!)

As usual, I will leave a disclaimer. I will NOT be held responsible if this causes any damage to your device,
you are responsible for making a nandroid backup in the case that a bootloop occurs.


Credit goes out to these guys
Quote:

  • AntonX - for CM10.2 ROM
  • mateo1111 - for PACrom JB 4.3 ROM
  • twinnfamous - for porting PACrom JB 4.3 with everything fully working, it's the base ROM I'm using
  • Pizza_Dox - for gm & hc scripts, 02SDCardAccel, 97ramscript, 20vmlt, 82Sleepers, RNGD, Cache_Cleaner
  • ViPER520 and zhuhang - for ViPER4Android FX
  • Chainfire - for some scripts. 01-GPU_touchrender, libncurses.so
  • ImbaWind - for Adrenaline Boost script
  • Spex - for some build.prop edits and some code from his startup scripts, I started out with his collection of tweaks
  • zeppelinrox - for services.jar patcher & terminal scripts. [vac, zepalign]
  • LENAROX - you made the cpuramcheck script possible, and you are also responsible for 20vmlt. Thanks
  • The rest I honestly don't remember but if you feel that you deserve credit, message me and I will give you proper credit where it should be given.
  • kuma82 - for the 90kuma script & WiFi fix (only needed in older builds, twinnfamous fixed the bug)
  • artit - for AROMA Installer base setup

And once again because I can't tell you how annoying it is for someone to screw up their own device for not following instructions carefully and then blame someone else..
I will NOT be held responsible if this causes any damage to your device, you are responsible for making a nandroid backup in the case that a bootloop occurs.


Enjoy
Last edited by leolawliet; 21st November 2013 at 11:41 AM.
The Following 12 Users Say Thank You to leolawliet For This Useful Post: [ View ]
1st September 2013, 09:28 AM   |  #2  
leolawliet's Avatar
OP Senior Member
Flag New York, NY
Thanks Meter: 1,070
 
2,633 posts
Join Date:Joined: Aug 2011
More
Downloads
HOW TO INSTALL:
Code:


* Download the Rom and Gapps

* Reboot to Recovery

* Wipe data/factory reset

* Wipe system

* Flash the ROM and then Gapps

* Reboot your phone

* Enjoy
__________________________________________________ __________________________________________

HOW TO UPDATE:
Code:


* Download the latest version

* Reboot to Recovery

* Wipe dalvik cache and cache

* Wipe system

* Flash the ROM and then Gapps

* Reboot your phone

* And enjoy the latest version of PAC

__________________________________________________ __________________________________________


DOWNLOADS


Quote:


================================================== ==========
ROM
================================================== ==========

Code:
11/21/2013
Mirror #1 Dev-Host (Please use this mirror)

11/14/2013
Mirror #1 Dev-Host (Please use this mirror)

10/31/2013
Mirror #1: Dev-Host (please use this mirror)

10/19/2013
Mirror #1: Box (please use this mirror)

Mirror #2: Dropbox (thanks DjSidEShoW)
================================================== ==========
Google Apps & Add-ons
================================================== ==========

Code:
Slim AROMA Gapps: Get it here. 
Install what you want, you have that option now

UltraSlim Gapps: here. 
Only 11mb, no extra clutter

IRS Starter Pack: for ViPER4Android FX. Get the latest files here. 
(optional)

Google Home Add-on: Get it here.
I recommend you install Gapps first.

Last edited by leolawliet; 21st November 2013 at 11:43 AM.
The Following 3 Users Say Thank You to leolawliet For This Useful Post: [ View ]
1st September 2013, 09:28 AM   |  #3  
leolawliet's Avatar
OP Senior Member
Flag New York, NY
Thanks Meter: 1,070
 
2,633 posts
Join Date:Joined: Aug 2011
More
Misc./Discontinued
LeoLawliet presents..
- PenberEngine -
Tweaks for everyday use



These tweaks are already included in PenberRom5,
This is just for anyone who wishes to have the additional tweaks for a different device.



- Download -
10/06/2013



- build.prop tweaks -
Also included already, use on whatever ROM you like

Code:
### LeoLawliet's new tweaks 9/15/2013 ###

# Misc Tweaks
debug.gr.swapinterval=0
debug.performance.tuning=1
dev.pm.dyn_samplingrate=1
persist.adb.notify=0
persist.service.adb.enable=1
persist.sys.use_dithering=1
persist.sys.purgeable_assets=1
qemu.hw.mainkeys=0
ro.min_pointer_dur=1
ro.sec.proximity.delay=0
sys.mem.max_hidden_apps=15

# Battery Tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=1

# Unlocks Screen using Menu Button
ro.config.hw_menu_unlockscreen=true

# Kernel Tweaks
ro.kernel.checkjni=0

# Ram Tweaks
persist.sys.purgeable_assets=1

# Kills Loging
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1

# Media Streaming Optimizations
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true

# Camera & Media Tweaks
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.dec.jpeg.memcap=20000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=75
ro.media.enc.jpeg.quality=100
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=25
ro.media.codec_priority_for_thumb=so

# CM9 Tweaks
hwui.disable_vsync=true
hwui.render_dirty_regions=false

# Voice Optimization
ro.ril.enable.amr.wideband

# Better Telephony Settings
ro.config.vc_call_vol_steps=15
ro.config.vc_call_steps=20
ro.telephony.call_ring.delay=0
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0

# Google DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4

# TCP Tweaks (might break WiFi)
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960

# Wireless Conection Tweaks (might break WiFi)
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000

# 3d performance 
persist.android.strictmode=0 
ro.min_pointer_dur=1 
ro.secure=0

# 16BIT Support
debug.fb.rgb565=1

# 16BIT Transparency
persist.sys.use_16bpp_alpha=1

# Graphic Tweaks
ro.product.gpu.driver=1
debug.gr.swapinterval=0

# Better scrolling responsiveness
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000 
ro.min.fling_velocity=8000

# Better Touch Responsiveness
touch.presure.scale=0.001

# Dalvik Tweaks
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.dexopt-flags=m=y,v=n,o=n
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.lockprof.threshold=500
dalvik.vm.execution-mode=int:jit
dalvik.vm.jmiopts=forcecopy
dalvik.vm.dexopt-data-only=1

# Enable Qualcomm tile rendering (Hardware Rendering)
debug.enabletr=1
persist.sys.composition.type=gpu 

# enable harware egl profile 
debug.egl.profiler=1

# FPs Booster
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20

# Graphic Optimization
debug.gr.numframebuffers=3
ro.min_pointer_dur=1

# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1

# Nitro Lagg Nullifier
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=false
MIN_HIDDEN_APPS=false
MAX_HIDDEN_APPS=false
CONTENT_APP_IDLE_OFFSET=false
EMPTY_APP_IDLE_OFFSET=false
MAX_ACTIVITIES=false
ACTIVITY_INACTIVE_RESET_TIME=false
MAX_RECENT_TASKS=false
MIN_RECENT_TASKS=false
APP_SWITCH_DELAY_TIME=false
MAX_PROCESSES=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false

# Pro-Tuned ADJ 1.2 by LENAROX.
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=4
ro.PERCEPTIBLE_APP_ADJ=3
ro.HEAVY_WEIGHT_APP_ADJ=2
ro.SECONDARY_SERVER_ADJ=1
ro.BACKUP_APP_ADJ=5
ro.HOME_APP_ADJ=6
ro.HIDDEN_APP_MIN_ADJ=7
ro.EMPTY_APP_ADJ=15
#Ultimate Assassin Mode!
#ro.SECONDARY_SERVER_ADJ=15
#ro.HIDDEN_APP_MIN_ADJ=3

# Qualcomm Display Settings (Qualcomm devices ONLY!!)
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1

# Rapid Boot Technology 1.1 (Reduces bootup time)
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true

# Rendering Tweaks
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1

# Sensor Sleep Control
ro.ril.sensor.sleep.control=1

# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0

### End of LeoLawliet's new tweaks 9/15/2013 ###
Last edited by leolawliet; 15th November 2013 at 10:41 AM.
The Following 4 Users Say Thank You to leolawliet For This Useful Post: [ View ]
1st September 2013, 10:21 AM   |  #4  
Member
Flag Bhubaneswar
Thanks Meter: 6
 
83 posts
Join Date:Joined: Apr 2013
More
any screenshots?
1st September 2013, 11:07 AM   |  #5  
leolawliet's Avatar
OP Senior Member
Flag New York, NY
Thanks Meter: 1,070
 
2,633 posts
Join Date:Joined: Aug 2011
More
Quote:
Originally Posted by noob.gamer

any screenshots?

It's basically PACrom JB 4.2.2 but heavily modified. It looks exactly the same.

I still need to add the finishing touches before anything. I should have it done and uploaded within the next few hours.

Edit: Uploaded and posted, check the 2nd post.

Edit2: Don't download yet, it bootloops and I know why. I'll fix it right now.
Last edited by leolawliet; 1st September 2013 at 03:21 PM.
The Following User Says Thank You to leolawliet For This Useful Post: [ View ]
1st September 2013, 06:31 PM   |  #7  
pisherthefisher's Avatar
Senior Member
Thanks Meter: 344
 
784 posts
Join Date:Joined: Jan 2012
New one still bootloops

Sent from my LG-P769 using xda app-developers app
1st September 2013, 07:36 PM   |  #8  
leolawliet's Avatar
OP Senior Member
Flag New York, NY
Thanks Meter: 1,070
 
2,633 posts
Join Date:Joined: Aug 2011
More
I know, I'm working on it x__x

This is an older one I made but I didn't have time to test it.

http://d-h.st/9ju
Last edited by leolawliet; 1st September 2013 at 08:06 PM.
The Following User Says Thank You to leolawliet For This Useful Post: [ View ]
2nd September 2013, 09:49 AM   |  #9  
leolawliet's Avatar
OP Senior Member
Flag New York, NY
Thanks Meter: 1,070
 
2,633 posts
Join Date:Joined: Aug 2011
More
Still needs work and my WiFi sucks, can't even upload anything :/

Sent from my LG-P769 running PACrom JB 4.3 using Tapatalk 2
The Following User Says Thank You to leolawliet For This Useful Post: [ View ]
2nd September 2013, 10:44 AM   |  #10  
Unn113's Avatar
Senior Member
Thanks Meter: 176
 
405 posts
Join Date:Joined: Nov 2010
Why did You upload this without testing? BTW, Your engine is preety nice, it really boost my phone, can i add some of tweaks to my rom? :3

unn.

Post Reply Subscribe to Thread

Tags
4.3, engine, pac, penber, rom
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes


Top Threads in Optimus L9 P760, P765, P768, P769 Android Development by ThreadRank