FORUMS

Analysis & Opinion

Top Forum Discussions

[ALPHA][ROM][4.3] CyanogenMod 10.2 for Samsung Galaxy SL - Alpha 4

1,787 posts
Thanks Meter: 13,487
 
By dhiru1602, Recognized Contributor / Recognized Developer on 3rd September 2013, 10:19 PM
Thread Closed Subscribe to Thread Email Thread
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (JB), which is designed to increase performance and reliability over stock Android for your device.

Code:
#include 
/*
 * Your warranty is now void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.

All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.


Quote:

IMPORTANT!


* PLEASE READ THE ENTIRE TOPIC BEFORE FLASHING THE ROM.


Quote:

Bug Reports

* REPORT BUGS IN THE TOPIC ONLY.
* DON'T SEND ME PM MESSAGES ABOUT BUGS OR FEATURE REQUESTS.
* ONLY REPORT THE BUGS IN CM10.2. I DON'T PROVIDE SUPPORT FOR OTHER ROMS. POST IN THEIR RESPECTIVE THREADS.
* IF YOU ARE ON A CUSTOM KERNEL, FIRST CHECK WITH THE STOCK KERNEL AND THEN REPORT THE BUG.


Quote:

Downloads

ROM Downloads

Google Apps - Download from ROM Manager or from Here

Quote:

Changelog

Alpha 4 - 11082013
Upstream CyanogenMod changes.

Alpha 3 - 10042013
Fixed random reboots
Bluetooth pairing and AVRCP fixed during sleep.
Cleaned up proprietary files.
Few kernel changes.

Alpha 2 - 09242013
Numerous changes and fixes.
Please refer to the Github commit history.

Initial Release based on 3.0.8 Kernel.
Alpha 1 - 09042013
Initial Release based on 3.0.8 Kernel.

Quote:

Installation Instructions


IMPORTANT! READ BEFORE FLASHING!
1. If you flash this ROM from Stock ROM, it will wipe data due to different partitioning. The device would reboot while flashing and resume again.
2. Once on this ROM, the most effective way of going back to any other ROM would be to repartition from Odin.
3. While converting the filesystem, your efs that has your IMEI is backed up to /emmc/backup/efs. Keep a backup on your PC just in case.
4. Incase if you don't get a network signal, check if your IMEI and Baseband are proper. If not, go back to stock and try again.
5. Do NOT use Odin to flash Modems. Due to different partitions, Odin will screw up your existing MTD setup.


Stock ROM
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. The device will reboot and finish flashing.
6. Reboot to Recovery Again.
7. Flash Google Apps.
8. Reboot

Any other AOSP ROM (CM7/MIUI/CM9)
1. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. The device will reboot and finish flashing.
6. Reboot to Recovery Again.
7. Flash Google Apps.
8. Reboot

Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot

Quote:

Sources

https://github.com/dhiru1602

Quote:

Credits

codeworkx
sconosciuto
Adi_Pat
Last edited by dhiru1602; 13th November 2013 at 05:45 AM.
The Following 107 Users Say Thank You to dhiru1602 For This Useful Post: [ View ]
 
 
3rd September 2013, 10:20 PM |#2  
dhiru1602's Avatar
OP Recognized Contributor / Recognized Developer
Thanks Meter: 13,487
 
More
Quote:

Known Issues

  • Few random crashes (?)
  • Video recording preview is slow.
  • Doesn't have wings
  • Doesn't have 4 processor cores
The Following 62 Users Say Thank You to dhiru1602 For This Useful Post: [ View ]
3rd September 2013, 11:13 PM |#3  
Senior Member
Flag Fiorano Modenese
Thanks Meter: 3
 
More
thank's dhiru for your dedication _O_ Tomorrow i'll test this alpha.

Doesn't have wings
Doesn't have 4 processor cores

LOL
3rd September 2013, 11:18 PM |#4  
Senior Member
Flag Belgrade
Thanks Meter: 45
 
Donate to Me
More
going to flash in minutes
will edit this comment in report after its done.
The Following User Says Thank You to xGiox For This Useful Post: [ View ]
3rd September 2013, 11:19 PM |#5  
nekoSL's Avatar
Member
Flag Muntinlupa
Thanks Meter: 17
 
More
The god has spoken,...

Yes master, I'm gonna test,try,Love this


[EDIT] : Hmmp i click the SElinux at the settings > About,...... phone crash,... hehehe
gonna report more later :P
Last edited by nekoSL; 4th September 2013 at 12:24 AM.
The Following User Says Thank You to nekoSL For This Useful Post: [ View ]
3rd September 2013, 11:44 PM |#7  
fastleo63's Avatar
Member
Flag Ferrara
Thanks Meter: 14
 
More
Many thanks, Master dhiru! So I don't need to wipe my phone to upgrade from 10.1 A9 to 10.2 A1, is this correct?
But it's always recommended. Or not?
The Following User Says Thank You to fastleo63 For This Useful Post: [ View ]
4th September 2013, 12:49 AM |#8  
rodero95's Avatar
Senior Member
Thanks Meter: 1,699
 
More
That's because SELinux is not implemented on our device.
Dhiru, I tried to implement it once but didn't test the changes, look at my cm-10.2-selinux branch on my repo if you're interested.
BTW, thanks for keeping the development going.
Sent from my GT-I9003 using xda premium
The Following 2 Users Say Thank You to rodero95 For This Useful Post: [ View ]
4th September 2013, 01:20 AM |#9  
ASMI1's Avatar
Senior Member
Thanks Meter: 121
 
More
Thank you master dhiru1602... you keep our device alive!!!!!
The Following 2 Users Say Thank You to ASMI1 For This Useful Post: [ View ]
4th September 2013, 01:33 AM |#10  
Member
Thanks Meter: 31
 
More
Thank you dhiru. What about battery driver in this release? Are there any troubles to take the 9003 attached to AC line?
The Following 3 Users Say Thank You to AR64SH For This Useful Post: [ View ]
4th September 2013, 01:49 AM |#11  
LoLaTiOn's Avatar
Recognized Contributor
Flag Tours
Thanks Meter: 9,156
 
More
I wonder what am I going to do with CM10.2 MouHaHa?§!
The Following 4 Users Say Thank You to LoLaTiOn For This Useful Post: [ View ]

Read More
Thread Closed Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes