JasJar rom dump - Boot loader commands.

---

I have to be frank I did not go very thoughly through all the documents but I would like to share my efforts to dump the rom and perhaps get an advice how to do it.

Trying the traditional way - put the machine in Bootloader (reset plus light plus poser), loding the romupdate or mtty ... while disabling the USb under the Async, typing d2s resulted in un unouthorized command or so.

As per one of our friends recommendation I typed the command : password UNIVERSAL , got a special promt and tried again d2s.. the result is the same - "unauthorized command".

if you know how what are the set of commands/sequense for getting into ADMIN kind of moode or using the password to make the rom dump, please help.

Found this in a diferent thread......


-insert a sd card on your device (128mb SD card),
-press light + power + reset (you will see unlighted screen with some words and number called bootloader)
-connect your device to your PC with the USB cable and disable USB on Active sync
-run MTTY.exe and select USB
-press enter, type d2s and press enter again (that command backups only the ROM in to SD and is the prefered way), or you can type:
d2s 60000000 00800000 8M radio rom
d2s 70000000 00100000 sd a 1M SPL
d2s 70100000 04000000 sd a 64.00 M OS TrueFFS
d2s 74100000 00a00000 sd a 10.00 M extrom DSK2:PART00 fatfsd
d2s 74b00000 02c40000 sd a 44.25 M root filesystem TRUEFFS
-when finish (you'll see it by device display) get the SD and insert it to a cards reader
-for to copy the file in SD Card to your PC you have to use NTRW and run it with this command: c:/ntrw read MDAuniv.nb1 x: (x is your card reader so replace with the letter of your card reader and have NTRW in C
-after that you should have in C: a file called MDAuniv.nb1 and you can post it here!

those command dont do anything..

it doenst say Wrong command or anything.

it just doesnt do anything..


god i need an imate wwe rom

Try connecting with Mtty and input "UNIVERSAL" as password, type in "h full" and report the result of this command, please....

Originally Posted by Topogigi

Try connecting with Mtty and input "UNIVERSAL" as password, type in "h full" and report the result of this command, please....

password UNIVERSAL
HTCSPass.<YHTCEUSB>h full
Invalid command : h
For a help screen, use command ? or h
USB>

hi, i've been trying everything on the internet so far and nothing is working. my universal is not showing any life-signs. the light+power+reset thing doesnt work, nothing comes up, in the drop box on mtty i only have COM1 COM2 and COM3. if i connect to COM1 or COM2 and type something, nothing happens, nothing i type even comes up. if i connect to COM3 i can atleast see what i type but still when i press enter nothing happens. i dont kno what else there is to do. if i hold the 1&2 buttons +reset (only when connected to pc) the screen comes up saying that i should press 0 to reset to factory defaults or x to exit and no matter what i press nothing happens and the light goes off.