Thanks Meter 301
Join Date: Sep 2006
Location: Ratchada (Bangkok)
Black arrow to small square hole should have a small clear stepped plastic lens that fits in the hole, if you been methodical you may find it in your work area if not you ideally need get one !
Also looks like you may of removed/damaged the black mesh for earpiece near this missing lens :-/
As for gold tape no idea if will cause any issues as never removed like you have, it is a shielding tape similar to what runs up edges of digi,l cd & centre chassis before disassembled & we get away without that !
Just use lots of care or things won't be much fun once rebuilt.
Most issue with sensors is idiots who block them with bad home made tape or shoddy assembly.
You will need a tape kit for digi & centre chassis (links in HD2 wiki)
Tape alone is not enough as none are as good as the factory tape. Ideally you need a small tube of black silicone adhesive such as PU40. You can use this sparingly down sides of new digi to lcd after first fixing it into position using tape, do make sure digitizer is positioned correctly on LCD as about 0.5mm out will cause button issues, do a dry run on buttons & lcd, digi function before building it up with adhesive. Use a few very small spots of silicone adhesive down sides of LCD (Make gaps in tape as needed) to centre chassis & near corners as without it the assembly will lift & not hold flush, with silicone adhesive (used sparingly & with thought) an OEM finish build is achievable & it remains that way without lifting in a corner or 2 ...
Care & care & more care is needed if first time on an HD2 as without it you will be lucky to have a usable device, good luck ...
[DEVICE1] : [HD2][EU model as my TMOUS has mainboard charge circuit fault]
[ROM] : [Energy Dinik 23699 Nov24]
[OS] [WindowsMobile® 6.5.x][CHT2.0.S2.5]
[RADIO] : [2.12.50.02_2
[DEVICE2] : [OPPO Finder X9017] [ROOT
[DEVICE3] : [Raphael]
[ROM] : [Energy Dinik 23699]
[OS] [WindowsMobile® 6.5.x]
[RADIO] : [1.14.25.05 + RILPHONE.DLL]
[SOFTWARE] : [Mortscript
] [FingerKBD Eng/Thai (WVGA)
] [Thai Font/Input SIP