5,600,571 Members 33,002 Now Online
XDA Developers Android and Mobile Development Forum

[Q]HTC Gratia after jtag "wrong model id"

Tip us?
 
munjeni
Old
(Last edited by munjeni; 6th February 2012 at 12:01 PM.)
#1  
munjeni's Avatar
Recognized Contributor / Recognized Developer - OP
Thanks Meter 14864
Posts: 4,458
Join Date: Jun 2011
Default [Q]HTC Gratia after jtag "wrong model id"

Hello, did anyone know whats happening with my htc gratia. I tried to run windows mobile (htc hd mini that is the same like aria) and before it I dumped whole flash by jtag. After playing with phone and restoring flash dump to phone, phone working good like before, but when I try to install from standard way from gold card (gold card is 100% ok and worked all times before) I got "wrong model id"! Allso tried installing revolutionary hboot but problem again with "wrong model id", allso tried installing radio, hboot, radioconf, boot, system...etc again "wrong model id"... so anyone have idea what is "wrong model id" or how to bypas that? Comunication with jtag is ok so if you have an idea I will try all you want, development board is ready, writing-reading flash is ok, please help me!

 
munjeni
Old
(Last edited by munjeni; 7th February 2012 at 02:50 PM.)
#2  
munjeni's Avatar
Recognized Contributor / Recognized Developer - OP
Thanks Meter 14864
Posts: 4,458
Join Date: Jun 2011
Is posible that there is no one that have knownledge for our problem

Anyone know diference between aria and gratia? I tried with super CID "11111111" but have again wrong model id! What is inside aria and what is inside gratia, for example this string "PB9220000" or there is diference in our 2 models? Not understand what is model id and where is stored! Waiting your help, thanks!

EDIT:
ok I found something. Problem is:
- found an link from pastebin and I see model id is modelid: PB92***** http://pastebin.com/qJRbFmse
- but mine phone have model id modelid: LIBE*****
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 6.02.1002
(bootloader) version-baseband: 7.13.35.13
(bootloader) version-cpld: None
(bootloader) version-microp: 031b
(bootloader) version-main: 1.11.111.1
(bootloader) serialno: 
(bootloader) imei: 
(bootloader) product: liberty
(bootloader) platform: HBOOT-7227
(bootloader) modelid: LIBE*****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3913mV
(bootloader) partition-layout: HTC
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-45bf9871
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
So I found what is model id and where is diference but not found an stock rom for model id LIBE***** and not understand why my device changed model id from pb92 to libe. Anyone have link to an stock rom for LIBE*****? Any help is welcome!

EDIT:
Ok, there is fastboot option to chande MID "fastboot OEM writemid LIBE*****" but when I try to change to pb92 I got "(bootloader) Main MID does not match [LIBE] or [LIBE]!" so how to change it, where is stored mid, I write LIBE1122 succesfully and after getvar all I got LIBE1122, after dumping whole flash again and after searching dump for string LIBE1122 there is no that string so it mean string is encrypted or is stored in low level memory?
 
munjeni
Old
(Last edited by munjeni; 8th February 2012 at 07:28 AM.)
#3  
munjeni's Avatar
Recognized Contributor / Recognized Developer - OP
Thanks Meter 14864
Posts: 4,458
Join Date: Jun 2011
Done offset 0x2564000 -> disabled mmu -> replaced \4C \00 \49 \00 \42 \00 \45 \00 \30 \00 \30 \00 \30 \00 \30 with \50 \00 \42 \00 \39 \00 \32 \00 \32 \00 \30 \00 \30 \00 \30 \00 \30 -> rebooted -> done, now its PB9220000 and I think its time stoping speaking byself here, thanks for your help
 
Dr_Wolodya
Old
(Last edited by Dr_Wolodya; 10th February 2012 at 09:25 AM.)
#4  
Member
Thanks Meter 29
Posts: 85
Join Date: Jul 2008
Location: Kyiv
Quote:
Originally Posted by munjeni View Post
I dumped whole flash by jtag.
.....................................
 
munjeni
Old
(Last edited by munjeni; 13th February 2012 at 08:32 PM.)
#5  
munjeni's Avatar
Recognized Contributor / Recognized Developer - OP
Thanks Meter 14864
Posts: 4,458
Join Date: Jun 2011
. .
 
183.amir
Old
#6  
Member
Thanks Meter 2
Posts: 35
Join Date: Apr 2007
Quote:
Originally Posted by munjeni View Post
Done offset 0x2564000 -> disabled mmu -> replaced \4C \00 \49 \00 \42 \00 \45 \00 \30 \00 \30 \00 \30 \00 \30 with \50 \00 \42 \00 \39 \00 \32 \00 \32 \00 \30 \00 \30 \00 \30 \00 \30 -> rebooted -> done, now its PB9220000 and I think its time stoping speaking byself here, thanks for your help
Hi, could you please explain that how did you do this?
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes