If its built like their phones then the digitizer is glued to the glass. Which is what you bought. If it helps any, I did take apart an Asus tablet and the digitizer is glued to the glass as well. But the LCD panel has a double sided foam around it which is how it was attached to the LCD/digitizer. If you don't heat the foam tape enough it's going to be a PITA it won't separate easily. But don't force it or you will crack the LCD panel. They are probably 2-3 mm thin panel. So heat it up enough to allow it to separate on its own while you put your prying tool in between. And work your way around with little force. If you have to use more force to separate them, then it's not hot enough. Dont rush like I did and I ended up cracking the lcd panel.
Sent from my SM-P600 using Tapatalk 4
Don't forget to give thanks if I've helped you in anyway...